Top 9 Water Softener Air Gap – Home Improvement

As an Amazon Associate I earn from qualifying purchases.

1. Air Gap International

#ad

AG130-001, Dual Air Gap for Water softener and Reverse Osmosis with 1-1/2 inch and 3/8 or 1/4-inch inlets, 2-inch Stand Pipe 8500, GAP-CAP

#ad
Air Gap International #ad - Certification: the ag130-001 is legal to install in any state. The optimum recommended flow rate is 4-5 gallons per minute. Splash guards are an integral part of the design and can be seen through the side air gap window. This can create splashing noise that may be objectionable.

The testing is conducted for every manufactured lot to ensure consistent performance. Standpipe connection: gap-cap air gap ag130-001 inserts directly into the 1-1/2-inch and 2-inch standpipes. If needed, it can be glued in place with plastic standpipes using regular PVC adhesive. Quiet operation: when water exits the air gap, depending on the design, it may flow directly into a P-trap. The 1/2-inch inlet accommodates any 1/2-inch slip joint adapters including a threaded end, barb connection, and a quick connect for PEX tubing.

The air gap outlet is designed to pass up to 7 gallons per minute. The pipe elbow should be located at least 12 inches from the air gap to eliminate splashback. During water softener operation, an initial discharge surge can create splashing. Splash shield eliminates the possibility of water splashing outside of the air gap. Also, all of the products are tested for strength and to make sure that every glue joint will withstand at least 40lb of force and not break. A 3/8-inch inlet port is provided for RO systems.
BrandAir Gap International #ad
ManufacturerAIR GAP INTERNATIONAL #ad
Part NumberAG130-001
ModelAG130-001

2. Air Gap International

#ad

Water Filter/Softener Air Gap with 1/2-inch Barb Connector for Installation on a 1-1/2-inch Standpipe with PVC Trap Adapters.

#ad
Air Gap International #ad - Recommended usage up to 15 gallons/minute flow rate. Splash guard assures complete dry operation. Provides easy connection to 1-1/2-inch standpipe drain. Legal to install in any state UPC Listed, IPC and NSF tested. Can be pressure fit or glued to a plastic standpipe.
BrandAir Gap International #ad
ManufacturerAIR GAP INTERNATIONAL #ad
Part NumberET117-008
ModelET117-008

3. Air Gap International

#ad

Water Softener Air Gap for installation in Washing Machine box with 2-inch Drainpipe 61-S, AG140-001, GAP-IT

#ad
Air Gap International #ad - Also, all of the products are tested for strength and to make sure that every glue joint will withstand at least 40lb of force and not break. Standpipe connection: the ag140-001 comes with a 2 inches pvc mounting base that fits into a recessed washing machine box with 2 inches drainpipe.

The ag140-001 allows space for washer drain hook or soft rubber washer hose. Splash protection: the ag140-001 air gap uses splash guards to assure a completely dry operation. Splash guards are an integral part of the design and can be seen through the side air gap window. The air gap is tested at 15 gallons per minute and recommended usage is 7 gallons per minute. The ag140-001 air gap is designed with a flow straightener to quiet and smooth out turbulent flow. During water softener operation, an initial discharge surge can create splashing.

Certification: the ag140-001 is legal to install in any state. When designing drainage for an air gap, makes sure that P-trap is located minimum 20-inches from the top of the standpipe. This can create splashing noise that may be objectionable. It is upc uniform plumbing code listed, ipc international Plumbing Code and NSF National Sanitation Foundation tested. It is designed to fit into recessed washing machine outlet boxes with 2 inches drainpipe.
BrandAir Gap International #ad
ManufacturerAIR GAP INTERNATIONAL #ad
Part NumberAG140-001
ModelAG140-001

4. Plumb Pak

#ad

Plumb Pak PP855-69 Air Gap for Standpipes, Grey

#ad
Plumb Pak #ad - Unit housing length approx. Allows soft rubber washer hose or washer metal drain hook to share standpipe with other Air Gap units, provides more than twice the code-required minimum air gap opening. Upc listed and tested for compliance to IPC and NSF standards. 8 liters/minute. 5 ½-inch 13. Fits 1 1/2-inch or 2-inch standpipes, can be mounted at 3 different levels. 97 cm. 5 liters/minute, tested at 15 gallons/minute 56. 7 to 26. Recommended usage 1 to 7 gallons/minute 3.
BrandPlumb Pak #ad
ManufacturerPlumb Pak #ad
Height8.5 Inches
Length3.5 Inches
Width2 Inches
Part NumberPP855-69
ModelPP855-69

5. Air Gap International

#ad

Universal Air Gap for Water Softeners and Filters with 1/2-inch OD or 5/8-inch ID Inlet Port and 1-1/2-inch or 2-inch Drainpipe Outlet AG100-001, 34700, Mr. Drain

#ad
Air Gap International #ad - The testing is conducted for every manufactured lot to ensure consistent performance. This can create splashing noise that may be objectionable. The optimum recommended flow rate is 7 gallons per minute. Standpipe connection: mr. For tubing to stay in place, barb connection, and a quick connect for PEX tubing.

Quiet operation: when water exits the air gap, it is recommended to use 22 degrees elbow inline with standpipe to avoid direct drainage to P-trap. The 1/2-inch inlet accommodates any 1/2-inch slip joint adapters. The body of the air gap provides stops to assure secure placement. Splash guards are an integral part of the design and can be seen through the side air gap window. The pipe elbow should be located at least 12 inches from the air gap to eliminate splashback. The adapters include a threaded end, the inlet accommodates 5/8-inch OD tubing that can be directly inserted into the inlet.

Easy to connect: mr. The air gap outlet is designed to pass up to 15 gallons per minute. Also, all of the products are tested for strength and to make sure that every glue joint will withstand at least 40lb of force and not break. Also, it needs to be attached to a support structure within 12-18 inches from the inlet port. Drain air gap ag100-001 inserts directly into the 1-1/2-inch and 2-inch standpipes.
BrandAir Gap International #ad
ManufacturerAIR GAP INTERNATIONAL #ad
Part NumberAG100-001
ModelAG100-001

6. Air Gap International

#ad

Water Filter/Softener Air Gap With 3/4-inch Female Threaded Inlet for Use With 1-1/2-inch Standpipe

#ad
Air Gap International #ad - Can be pressure fit or glued to a standpipe. Recommended usage up to 15 gallons/minute. Legal to install in any state UPC Listed, IPC and NSF tested. Provides easy connection to 1-1/2-inch standpipe. Splash guard assures complete dry operation.
BrandAir Gap International #ad
ManufacturerAIR GAP INTERNATIONAL #ad
Part NumberET115-002
ModelET115-002

7. Air Gap International

#ad

AG100-002., TG-20, Universal dual air gap for dialysis machines and water softeners/filters with 3/8 inch ports Dialygap

#ad
Air Gap International #ad - Both inlets can drain water simultaneously without interfering with each other. To minimize the movement of tubes connected to the air gap, it is recommended that tubes are secured to a supporting structure using clamps within 18 inches from the air gap. Easy to connect: the ag100-002 air gap has two 3/8-inch od inlet port for direct 3/8-inch id poly tube connection.

Since an air gap is a non-pressurized device, very little pressure is exerted on the tubing connected to the air gap. Splash protection: the ag100-002 air gap uses splash guards to assure a completely dry operation. Splash shield eliminates the possibility of water splashing outside of the air gap. Quiet operation: when water exits the air gap, it is recommended to use 22 degrees elbow inline with standpipe to avoid direct drainage to P-trap. Splash guards are an integral part of the design and can be seen through the side air gap window.

Also, all of the products are tested for strength and to make sure that every glue joint will withstand at least 40lb of force and not break. If an elbow is not an option for your application, it may flow directly into a P-trap. This air gap can be used with plastic or metal standpipes. These certifications assure that every product is safe to use. It is upc uniform plumbing code listed, ipc international Plumbing Code and NSF National Sanitation Foundation tested.
BrandAir Gap International #ad
ManufacturerAIR GAP INTERNATIONAL #ad
Part NumberAG100-002
ModelAG100-002

8. Air Gap International

#ad

DLA-G20, Water Softener/Filter Air Gap for 2 inches Standpipe and 1 inch Threaded Inlet ET120-001, G-200

#ad
Air Gap International #ad - Prevents splash or spray escaping through the airgap window. Upc listed, ipc nsf tested, asmE A112. 1. 3 compliant. Installs onto 2-inchs ABS or PVC Schedule-40 standpipes. 1-inch threaded inlet for use with MIPT Schedule-40 nipples and adapters. Made from white ABS resin to ASTM specifications.
BrandAir Gap International #ad
ManufacturerAIR GAP INTERNATIONAL #ad
Part NumberET120-001
ModelET120-001

9. Air Gap International

#ad

Universal Multi Drain Air Gap for Condensates, Water Softeners and Water Filters with 1/2-inch and 3/4-inch PVC and Copper Pipe Adapters

#ad
Air Gap International #ad - Easy to connect: the ag180-002 air gap comes with pipe support adapters for 1/2-inch or 3/4-inch pvc and copper pipe connection. The ag180-002 can accommodate up to 5 different discharge pipes and can handle the simultaneous flow from a water softener, condensate, RO filter, and iron filter.

Universal air gap: the ag180-002 is a universal air gap that can accommodate flow rates below 36 gpm. The optimum recommended flow rate is 18 gallons per minute. Splash protection: the ag180-002 uses a funnel design to assure a splash-free operation. All discharge pipes should be pointed to the center of the air gap to provide the best drainage. Make sure that p-trap is located minimum 12-inches from the top of the standpipe. Funnel design and side splash guards eliminate the possibility of water splashing outside of the air gap. The pipe elbow should be located at least 12 inches from the air gap to eliminate splashback.

An air gap is a non-pressurized device, and therefore very little pressure is exerted on the pipes. This air gap can be used with plastic or metal standpipes. For pipes to stay in place, ensure they are secured to a support structure within 12-24 inches from the air gap. The air gap is designed to drain up to 36 gallons per minute safely. The ag18-002 tested for strength and to make sure that every joint and connection will withstand at least 40lb of force and not break.
BrandAir Gap International #ad
ManufacturerAIR GAP INTERNATIONAL #ad
Height6.25 Inches
Length4.75 Inches
Width4.25 Inches
Part NumberAG180-002
ModelAG180-002