Top 9 UpCut Spiral Router Bit – Spiral Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. Whiteside Router Bits

#ad

Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

#ad
Whiteside Router Bits #ad - Precision ground for proper balance at high RPM. Whiteside router Bits are made with Premium Carbide. Industrial Quality.
BrandWhiteside Router Bits #ad
ManufacturerWhiteside #ad
Height5.5 Inches
Length2 Inches
Weight0.06 Pounds
Width3 Inches
Part NumberRU2100
ModelRU2100

2. SpeTool

#ad

1/2 Cutting Diameter Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving, SpeTool Upcut Spiral Router Bits Extra Long 4 inch with 1/2 Inch Shank

#ad
SpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet. Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits. The cnc end mill for plywood, mDF, oak, and any hardwood working and Long service life for sharp. Solid carbide up cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length. Industrial quality control to ensure best performance.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSPLD1/4-1/4-U

3. SpeTool

#ad

1/2 Inch Cutting Diameter HRC55 Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving Engraving Tools, SpeTool Upcut Spiral CNC Router Bits with 1/2 Inch Shank

#ad
SpeTool #ad - Spiral bits used for smoothly upcut groove and slots, Cycles and dados with clean edge and bottom, Mortises, better than straight bits. The cnc end mill for plywood, mDF, oak, and any hardwood working and Long service life for sharp. Industrial quality control to ensure best performance. Solid carbide up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/2-1/2-U

4. Freud

#ad

Freud 1/4" Dia. Solid Carbide Up Spiral Bit with 1/4" Shank 75-102

#ad
Freud #ad - D 1/4", 2 flutes, cutting length h 1", 1/4" Shank. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Overall dia. Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods. Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers.
BrandFreud #ad
ManufacturerFreud #ad
Height1 Inches
Length1 Inches
Weight0.08 Pounds
Width1 Inches
Part Number75-102
Model75-102

5. SpeTool

#ad

1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving, SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter

#ad
SpeTool #ad - Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits. The cnc end mill for plywood, mdf, oAK, and any hardwood working and Long service life for sharp. Industrial quality control to ensure best performance. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSPD1/4-1/4-U

6. MLCS

#ad

3-Piece, MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set

#ad
MLCS #ad - 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter. Remove sawdust and wood chips from plunge cuts with upward shearing. 1/4-inch and 1/2-Inch shanks. Perfect for deep mortises and cutting dadoes in a router table. Solid micro grain carbide cuts smooth and stays sharp.
BrandMLCS #ad
ManufacturerMLCS #ad
Part Number200
Model200

7. SpeTool

#ad

Carving, SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Wood Cut

#ad
SpeTool #ad - Industrial quality control to ensure best performance. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/4-U

8. SpeTool

#ad

Carving, 1/2 Inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut, SpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter

#ad
SpeTool #ad - Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits. Industrial quality control to ensure best performance. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Solid carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length. The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-3/8-1/2-U

9. Whiteside Router Bits

#ad

Whiteside Router Bits RU4700 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

#ad
Whiteside Router Bits #ad - Industrial Quality. Whiteside router Bits are made with Premium Carbide. Precision ground for proper balance at high RPM.
BrandWhiteside Router Bits #ad
ManufacturerWhiteside #ad
Height5.5 Inches
Length2 Inches
Width3 Inches
Part NumberRU4700
ModelRU4700