As an Amazon Associate I earn from qualifying purchases.
DFM Tool Works #ad - Large enough to cross mark 2 x 4 lumber. All components mADE IN USA. Qty 5 - 1/4" pin holes for Marking Polygon Miters w/ included pin. 1/16" scribe holes in 1/16" increments up to 3". Perfect 3. 5" x 3. 75" size for fitting in your pocket or apron.
DFM Tool Works #ad - Center marking hole Bottom is 1/16" diameter for consistent center mark. Center marking hole 11/32" 034" to allow larger pencils. Can be used as a Saddle Square to Transfer Lines. All components including pins Made in USA. Outer dimensions 2. 625" x 1. 625" x 0625".
Taytools #ad - 6 1/4” tall x 4” wide; blades are 1” wide by. 220” thick. Din 875/0 german standard squareness accuracy for both inside and outside to w/in 8 microns or 00003”.
Swanson Tool Co., Inc #ad - Made in usa: the speed square, construction professional, is essential for every carpenter, roofer, made in the USA since 1925, and DIYer. Simplify important tasks: any time you need to ensure something is square, this Speed Square is the best tool for the job. Features: pocket-sized swanson blue book, a comprehensive guide to Help Workers Make Correct Angle Cuts For Any Pitched Roof, and it includes pages of inch rise per foot run data - meaning you don't have to do the math.
Multiple gradations: make the exact mark you need! gradations Included For Marking Common, Valley, Hip, And Jack Rafters; Useful For Determining And Marking Angles And Making Square Cuts On Boards.
When used as a saw guide: The Speed Square makes truing up a board easy. Easy to use: 1/4-in spaced scribing notches and the diamond cutout for easy Rafter Seat Cuts And Scribing The Most Common And Popular Stud Widths, and Black gradations against its non-glare, matte finish make for easy reading in any lighting conditions. It's also really easy to mark 90 and 45 degrees with this square.
Woodraphic #ad - So not only are you able to mark the exact length, but also check the perfect right angle. Blades are engraved with laser marks on the scale with white markings on black smooth backgrounds for increased readability. Also, allowing the user to precisely mark up to the finest millimeter, this aluminum 90 square tools earned its square accuracy from Internationally accredited organizations.
Easy-to-read thermal - each aluminum blade is precisely milled with state-of-the-art MCT equipment followed by sanding procedure and anodizing finishing touches.
Mark with precision and get the ‘right’ right angle - woodraphic’s ruler gives you the ultimate marking precision, which is about 0039 inches. Woodraphic’s ruler was certified level 1 in Japanese Industrial Standards JIS. This stable cast aluminum tool plate is sturdy yet surprisingly lightweight. However, with woodraphic’s equipment, 200mm, 12”, 100mm, you can also measure diameter from the inside or the outside. If you are a professional who uses square rulers all day, you can tell the difference right away.
Johnson #ad - Combo square: the square head of this johnson metal square ruler is CNC machined for enhanced precision. Cast zinc head: the durable acrylic vial; heavy-duty cast zinc head with a chip-resistant e-coating finish; and reinforced screw-in scriber that won't fall out make this square withstand even the worst construction site usage.
This johnson level tool is designed and manufactured with precision in the United States. Applications: the cnc-machined head of the measuring tool acts as a stop; ensuring layout lines are always square to the edges.
This makes it an ideal machinist's square; straightedge; adjustable try square; miter square; marking gauge; and depth gauge. It gives the accuracy and precision needed for every job. Its auto-lock blade assembly makes it easy to accurately align tools for usage. Product specifications: this 12’’ combination square measures 075 × 5. 5 × 12 inches and weighs 4. 8 ounces 0
Empire Level #ad - Stainless steel blade has a matte finish that will never rust or corrode. True blue vial is guaranteed accurate to within. 00050 inch for maximum accuracy, extreme durability, and enhanced readability.
Applications: this carpenter steel square can verify and mark both interior and external right angles; making it useful for framing; stair construction; shed construction; and other carpentry chores.
Stamped graduations: graduations in 1/8" increments are permanently stamped on this 8'' framing square. It weighs approximately 4. 8 ounces 018 kg. Product specifications: this usa-made try square measures 1. 5 × 5. 1 × 8 inches. Its heavy-duty blade features stainless steel construction; so you never have to worry about rust or corrosion.
1. DFM Tool Works
#adBlue, DFM Small Carpenter Square Made in USA with Fixed Miter Angle Pin English
#adMore information #ad
| Brand | DFM Tool Works #ad |
| Manufacturer | DFM TOOL WORKS #ad |
| Height | 3.7 Inches |
| Length | 3.5 Inches |
| Width | 0.75 Inches |
| Part Number | DFM Small Carp Square |
More information #ad
2. DFM Tool Works
#adDFM Small Square and Marking Center Finder Precision MADE IN USA Blue
#adMore information #ad
| Brand | DFM Tool Works #ad |
| Manufacturer | DFM Tool Works #ad |
| Height | 0.63 Inches |
| Length | 2.63 Inches |
| Width | 1.63 Inches |
| Part Number | DFM Small Square |
More information #ad
3. Taytools
#adMachinist Engineer Solid Square 6 1/4” x 4” x .220” Thick DIN 875/0 Square w/in, 0.0003” Stainless TTWSS6
#adMore information #ad
Wide enough to stand on its edge on its own. Comes packied in a cardboard box. Machined from a solid blank of stainless steel will never rust or go out of square.| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Part Number | TTWSS6 |
| Model | TTWSS6 |
More information #ad
4. Swanson Tool Co., Inc
#adSWANSON Tool Co S0101 7 Inch Speed Square, Blue
#adMultiple gradations: make the exact mark you need! gradations Included For Marking Common, Valley, Hip, And Jack Rafters; Useful For Determining And Marking Angles And Making Square Cuts On Boards.
More information #ad
The swanson speed Square is the perfect square for every project and job. Includes: features common to 5 different tools try square, miter Square, Line Scriber, Saw Guide, And Protractor Making The Speed Square Something That Belongs On Every Tradesman'S Tool Bench. When used as a saw guide: The Speed Square makes truing up a board easy. Easy to use: 1/4-in spaced scribing notches and the diamond cutout for easy Rafter Seat Cuts And Scribing The Most Common And Popular Stud Widths, and Black gradations against its non-glare, matte finish make for easy reading in any lighting conditions. It's also really easy to mark 90 and 45 degrees with this square.
| Brand | Swanson Tool Co., Inc #ad |
| Manufacturer | Swanson Tool #ad |
| Height | 8 Inches |
| Length | 1 Inches |
| Weight | 0.5 Pounds |
| Width | 8 Inches |
| Part Number | S0101 |
| Model | S0101 |
| Warranty | As Labeled |
More information #ad
5. Woodraphic
#adWoodraphic Signature Precision Square 300mm Guaranteed T Measurements Ruler for Measuring and Marking Woodworking Carpenters, Aluminum Steel Framing Professional Carpentry Use
#adEasy-to-read thermal - each aluminum blade is precisely milled with state-of-the-art MCT equipment followed by sanding procedure and anodizing finishing touches.
More information #ad
Each blade has a layout of 2-holes on the handle surface, diameters, and dimensions by inserting the 05mm sharp pencil lead through the marking hole. Stable yet lightweight - 90-degree blade is made with the anodized aluminum material with 2mm thickness. Mark with precision and get the ‘right’ right angle - woodraphic’s ruler gives you the ultimate marking precision, which is about 0039 inches. Woodraphic’s ruler was certified level 1 in Japanese Industrial Standards JIS. This stable cast aluminum tool plate is sturdy yet surprisingly lightweight. However, with woodraphic’s equipment, 200mm, 12”, 100mm, you can also measure diameter from the inside or the outside. If you are a professional who uses square rulers all day, you can tell the difference right away.
| Brand | Woodraphic #ad |
| Manufacturer | Woodraphic #ad |
| Height | 0.55 Inches |
| Length | 12.01 Inches |
| Weight | 0.52 Pounds |
| Width | 7.09 Inches |
| Part Number | WR-MS-300 |
More information #ad
6. Johnson
#adSilver, 1 Square, 12", Johnson Level & Tool 400EM-S Heavy Duty Professional Inch/Metric Metal Combination Square
#adThis johnson level tool is designed and manufactured with precision in the United States. Applications: the cnc-machined head of the measuring tool acts as a stop; ensuring layout lines are always square to the edges.
More information #ad
Stainless blade: this combination square tool has a stainless steel blade with English and metric graduations of 1/8"; 1/16"; and 1/32"; as well as metric graduations that are permanently imprinted; so they will never fade or degrade. This makes it an ideal machinist's square; straightedge; adjustable try square; miter square; marking gauge; and depth gauge. It gives the accuracy and precision needed for every job. Its auto-lock blade assembly makes it easy to accurately align tools for usage. Product specifications: this 12’’ combination square measures 075 × 5. 5 × 12 inches and weighs 4. 8 ounces 0
| Brand | Johnson #ad |
| Manufacturer | Johnson Level & Tool #ad |
| Height | 12 Inches |
| Length | 0.75 Inches |
| Weight | 0.3 Pounds |
| Width | 5.5 Inches |
| Part Number | 400EM-S |
| Model | 400EM-S |
| Warranty | 1 Year Warranty: Johnson Level warrants this product against defects in material and workmanship for one year after the confirmed purchase date. At its option, the company will replace or repair the product if it fails under normal use. |
More information #ad
7. Empire Level
#adEmpire Level E250 12-Inch Heavy Duty Professional Combination Square w/Etched Stainless Steel Blade and True BlueR Vial
#adMore information #ad
12-inch heavy-duty professional combination square with an etched stainless steel blade and True Blue vial. Self-aligning draw bolt; hardened scriber; heavy-duty machined square head. Made in USA.| Brand | Empire Level #ad |
| Manufacturer | Empire Level #ad |
| Height | 0.75 Inches |
| Length | 5.25 Inches |
| Weight | 0.74 Pounds |
| Width | 12 Inches |
| Part Number | E250 |
| Model | E250 |
More information #ad
8. PEC
#adPEC 7000-S-4 4 Pc 2"- 6" Solid Square Set in Case
#adPEC #ad - Made in the USA. Have accurate right angles inside and outside. Length of blade is measured from inner edge of beam to end of blade. Made from high quality tool steel. Blade is hardened.More information #ad
| Brand | PEC #ad |
| Manufacturer | PEC #ad |
| Weight | 2 Pounds |
| Part Number | 7000-S4 |
More information #ad
9. Johnson
#adJohnson Level & Tool 450 Try & Mitre Square – Structo-Cast Handle, 8", Silver, 1 Square
#adJohnson #ad - It may also be used to examine the angles of bench saws and other cutting machines. Carpentry square: this johnson l-square is a vital marking and checking tool for any carpenter. As a result; it provides precise accuracy for straighter; tighter workpieces; every time.Applications: this carpenter steel square can verify and mark both interior and external right angles; making it useful for framing; stair construction; shed construction; and other carpentry chores.
More information #ad
This measuring tool makes gauging angles and marking straight cuts simple and accurate. Excellent design: the structo-cast handle of this combination try/miter square is both durable and lightweight. Stamped graduations: graduations in 1/8" increments are permanently stamped on this 8'' framing square. It weighs approximately 4. 8 ounces 018 kg. Product specifications: this usa-made try square measures 1. 5 × 5. 1 × 8 inches. Its heavy-duty blade features stainless steel construction; so you never have to worry about rust or corrosion.
| Brand | Johnson #ad |
| Manufacturer | Johnson Level & Tool #ad |
| Height | 8 Inches |
| Length | 1.5 Inches |
| Weight | 0.3 Pounds |
| Width | 5.1 Inches |
| Part Number | 450 |
| Model | 450 |
| Warranty | 1 Year Warranty: Johnson Level warrants this product against defects in material and workmanship for one year after the confirmed purchase date. At its option, the company will replace or repair the product if it fails under normal use. |
More information #ad
