Top 9 Torsion Spring Winding Bars – Garage Door Springs & Wires

As an Amazon Associate I earn from qualifying purchases.

1. ZhenT

#ad

Premium 2Pcs Winding Bars with Non-Slip Handle 1/2 Inch in Diameter X 18 Inch in Length,Used for Garage Door Torsion Spring

#ad
ZhenT #ad - Premium material:use heat treated 45 steel to make sure the bar won’t bend or break off during operation. Anti-rust surface:surface is zinc plated, not tend to rust. One end colored red to make sure it is inserted to the full depth. Non-slip handle:compared with other products, we add knurling on handle to provide maximum control and enhance safety. Dimension: diameter 1/2" In x length 18" In, weight 1lb each. Appliciation:used to wind or unwind the tension on torsion springs, save yourself over a $100 bill from a garage door company.
BrandZhenT #ad
ManufacturerZhenT #ad
Height0.47 Inches
Length17.4 Inches
Weight2.05 Pounds
Width1.08 Inches

2. L Continue

#ad

Used for Garage Door Torsion Spring and Many More, Black., L Continue 2 Pack Winding Rods D 1/2" x L 18" Inch with Random Antiskid Handle

#ad
L Continue #ad - Material - high strength 45# steel and appearance galvanized. Both styles are shipped at random. Benefit - add a non-slip handle to enhance you safety. Application - used to wind and unwind the tension on torsion springs. Dimension - diameter 1/2" x length 18" and handle black. Note - there may be embossed handle and rubber handle due to product replacement issues.
BrandL Continue #ad
ManufacturerL Continue #ad
Part Number12.5x460-HEI

3. NIDAYE

#ad

2 Pack 18 Inch Winding Rods for Torsion Springs, 0.5inch Diameter Steel Winding Bars for Adjusting or Replacing Garage Door Tension Springs with Rubber Handle

#ad
NIDAYE #ad - Safety first: steel torsion rods allow you to safely perform torsion spring replacements and adjustments without worrying about keeping the spring tension under control. Failure to use these rods when replacing or adjusting torsion springs may result in personal injury and property damage.

Must have tool: torsion spring winding rods is the only tool recommended to make torsion spring adjustments to balance the weight of a garage door. Application: the pair of torsion spring winding rods are specifically designed for increasing winding and decreasing unwinding the tension on residential garage door torsion springs. If you have any problem, please don't hesitate to contact us, we'll reply within 24 hours.

When adjusting or replacing garage door torsion springs, it is extremely important that these tasks are not attempted with any tools other than these rods. They are designed to industry standard for residential garage door use, fit most residential winding cones. Dimensions: garage door torsion spring winding rod are 047inch in outside diameter and 17. 7” long.
BrandNIDAYE #ad
ManufacturerNIDAYE #ad
Part Numberwinding rods

4. PRIME-LINE

#ad

Prime-Line GD 52238 Torsion Spring Winding Rods – The Only Tools Recommended for Adjusting or Replacing Garage Door Tension Springs – 1/2” Diameter x 16” Long Round Steel Rods Pack of 2

#ad
PRIME-LINE #ad - Failure to use these rods when replacing or adjusting torsion springs may result in personal injury and property damage. Safety first – steel torsion rods allow you to safely perform torsion spring replacements and adjustments without worrying about keeping the spring tension under control.

When adjusting or replacing garage door torsion springs, it is extremely important that these tasks are not attempted with any tools other than these rods. They are designed to industry standard for  residential garage door use. Dimensions – garage door torsion spring winding rods are 1/2” in outside diameter and 16” long. Wind and unwind springs – the pair of torsion spring winding rods are specifically designed for increasing winding and decreasing unwinding the tension on residential garage door torsion springs.

Torsion spring rods are not for use on winding cones larger than 33/64" in diameter. Winding cones usage - winding cones should be wound and unwound 1/4 turn at a time. Must have tool – gd 52238 torsion spring winding rods is the only tool recommended to make torsion spring adjustments to balance the weight of a garage door.
BrandPRIME-LINE #ad
ManufacturerPrime-Line Products #ad
Height12.2 Inches
Length13.78 Inches
Weight1.8 Pounds
Width22.05 Inches
Part NumberGD 52238
ModelGD 52238
WarrantyAs listed.

5. Bueyfolt

#ad

1/2” Dia., 2 Packs of Winding Rods with Non-Slip Rubber Handle for Torsion Springs/Solid Stainless Steel Metal Winding Bars Hardware for Adjusting or Replacing Garage Door Tension Springs 18" Length

#ad
Bueyfolt #ad - When adjusting or replacing garage door torsion springs, it is extremely important that these tasks are not attempted with any tools other than these rods. Dimensions:package includes 2 winding rods, Garage door torsion spring winding rods are 1/2 inch in outside diameter and 18 inch long.

Safety first: steel torsion rods allow you to safely perform torsion spring replacements and adjustments without worrying about keeping the spring tension under control. Unique design: our winding rod has non-slip rubber handle to make it more comfortable and safe to use. Application: the pair of torsion spring winding rods are specifically designed for winding and unwinding the tension on residential garage door torsion springs.

A must-have tool: torsion spring winding rods is the only tool recommended to make torsion spring adjustments to balance the weight of a garage door. They are perfectly designed to industry standard for residential garage door use, fit most residential winding cones. Failure to use these rods when replacing or adjusting torsion springs may result in personal injury and property damage.
BrandBueyfolt #ad
ManufacturerBueyfolt #ad
Height0.5 Inches
Length18 Inches
Weight1.8 Pounds
Width0.5 Inches

6. SS

#ad

36" Garage Door Torsion Springs with Winding Bars 24, Pair of 225 X 2" X 22"

#ad
SS #ad - Includes pair of springsleft and right, nylon bushing and winding bars. Torsion springs are black coated, corrosion resistant, oil tempered and made in the U. S. A. Springs come with a 3 year limited warranty.
BrandSS #ad
ManufacturerSS #ad
Height2 Inches
Length36 Inches
Width2 Inches
Part NumberTS20225
ModelTS20225

7. Originalidad

#ad

Use for Adjusting or Replacing Garage Door Tension Springs, 1/2 Inches Diameter x 18 Inches Long Torsion Spring Winding Rods, Garage Door Winding Bars

#ad
Originalidad #ad - Use for unwinding and winding torsion springs. Garage door spring Winding Bars with Steel Material. Not suitable for winding cones larger than 33/64" in diameter. Fit most residential winding cones. 1/2" round bar, about 18" length and 1. 76 lbs weight.
BrandOriginalidad #ad
ManufacturerOriginalidad #ad
Height0.47 Inches
Length17.32 Inches
Width0.98 Inches
Part NumberORD-A013

8. SS

#ad

33" Garage Door Torsion Springs with Winding Bars 23, Pair of 218 X 2" X 21"

#ad
SS #ad - Springs come with a 3 year limited warranty. Torsion springs are black coated, corrosion resistant, oil tempered and made in the U. S. A. Includes pair of springsleft and right, nylon bushing and winding bars.
BrandSS #ad
ManufacturerSS #ad
Height2 Inches
Length33 Inches
Width2 Inches
Part NumberTS20218
ModelTS20218

9. SS

#ad

Pair of 207 X 2" X 22" Garage Door Torsion Springs with Winding Bars

#ad
SS #ad - Includes pair of springsleft and right, nylon bushing and winding bars. Springs come with a 3 year limited warranty. Torsion springs are black coated, corrosion resistant, oil tempered and made in the U. S. A.
BrandSS #ad
ManufacturerSS #ad
Height2 Inches
Length29 Inches
Width2 Inches
Part NumberTS20207
ModelTS20207