Top 9 Starter Punch Set – Pin Punches

As an Amazon Associate I earn from qualifying purchases.

1. SEDY

#ad

1/8", SEDY 6-Pieces Roll Pin Starter Punch and Bolt Catch Install Punch Set, 3/32", 5/64", 1/16"

#ad
SEDY #ad - 4pcs roll pin starter punches: 1/16", knurled steel handles for sure grip in every application, align and start the pin, 1/8", you have all the sizes needed to build the AR lower and upper receivers. Hollow end roll pin punch set helps to prevent damage caused by an accidental slip off while getting the pin started, 3/32", 5/64", finish driving it with an impact punch.

Easy access to one hard to reach pin. Using hand tools may be dangerous, please keep the items away from children pay attention to your own safety. These pin punches are heat treated, drop forged and the electroplating process, hardened and knurled steel for greater durability, workability, and overall performance.

This is a very cost-effective and special designed combo kit. 2pcs blot catch install punches: 3/32", 5/32", one with counter-bored tips to start roll pins and one with indexing tips to finish roll pins. You can get all the sizes you need when you fix the AR project. This set is ideal for AR platform or trigger guard, gas block, and forward assist. Flat on one side for proper alignment without fear of damaging your gun.
BrandSEDY #ad
ManufacturerSEDY #ad
Height0.25 Inches
Length5 Inches
Width1.5 Inches
Part NumberSDY-97780
ModelSDY-97780

2. Wheeler

#ad

Wheeler Engineering Roll Pin Starter Punch Set

#ad
Wheeler #ad - Fitted Nylon storage pouch. Beveled tip for Starting the roll pin. 9-piece set 1/16" through 5/16". Hardened steel construction.
BrandWheeler #ad
ManufacturerBattenfeld Technologies #ad
Height2 Inches
Length11 Inches
Weight1 Pounds
Width8 Inches
Part Number710910
Model710910

3. FROEXCE

#ad

FROEXCE Brass Punch Set Gunsmith Punch Set Brass Punches with Detachable Hammer Head and Hollow-End Starter Punch and Brass, Steel, Plastic Punches in High Durability for Gun Building and Removing

#ad
FROEXCE #ad - Included in the set: 1/8", and 1/8" 6140 chrome vanadium steel punches; 3/16", 3/32", 7/32", 1/4", 5/64", 9/64", and 5/32" steel punches; 2 pieces 1/16" and 2 pieces 3/32" steel punches; 1/16", 9/32" and 5/16" brass punches; 15/64 and 3/8" plastic punches; a hammer and 4 replaceable hammer heads. Hollow-end punches: we include a 4-piece hollow-end starter punch set including 1/16”, 5/64”, 3/32”, and 1/8” punches.

This special material and processing technology make this brass punch set for gunsmithing superior to other similar products in durability, corrosion resistance and strength. For example, we use steel which has better strength and durability. In addition, steel and nylon. Punches: compared with other similar products, for thinner pins, our gunsmith punch set has more types for a wider scope of applications to better meet the needs of consumers. Also, if you have any problems with this punch kit, please feel free to contact us and we'll be glad to help you.

Customer service: due to the nature of this product, it is possible for some parts to eventually wear out through repeated use. Hammer: our punch set gunsmith has been improved in two areas, both ends of the hammers can be removed and replaced. They are made of 6140 chromium steel with nickel plating. We provide hammer heads of four different materials, including rubber, to meet the needs of users for different hammer heads, brass, the weight of the hammer and the surface area of the hammers faces.
BrandFROEXCE #ad
ManufacturerFROEXCE #ad
Part NumberYYOJ

4. JDAMALEYWO

#ad

JDAMALEYWO Roll Pin Starter Punch Set Hollow End Stainless Steel

#ad
JDAMALEYWO #ad - 4-piece hollow roll pin starter punch set - size are 1/8”, 3/16”, 5/32”, 7/32”. Knurled steel handles for sure grip in every application, prevent damage caused by an accidental slip off while getting the pin started. Made of high quality stainless steel for durability, processability and overall performance. Use hollow end punches to align and start the pin then finish driving it home with an impact punch. Suitable for the including trigger guard, gas block, and forward assist.
BrandJDAMALEYWO #ad
ManufacturerJDAMALEYWO #ad
Weight0.04 Pounds
Part Number43239-132371
Model43239-132371

5. GOTICAL

#ad

Gotical Gunsmithing Roll Pin Starter Punch Set

#ad
GOTICAL #ad - Shorter shaft starter punch gives you more control By Putting Your Hand Closer To the Pin, And Keeps User From Bending Roll Pins. Four piece set, 1/8″, sizes include: 1/16″, 3/32″, & 5/64″. A must-have for any AR builder or gunsmith for an easy installation effort. All sizes needed To Complete A Build. Designed to hold the pin when start punching to prevent accidental slip off.
BrandGOTICAL #ad
ManufacturerGOTICAL #ad
Part NumberTS-GT44

6. Wheeler

#ad

Wheeler 110128 Master Roll Pin Punch Set

#ad
Wheeler #ad - Reliable: comes with small dual-sided hammer for precise control. Features: 9 piece roll pin starter set with 5/16", 3/32", 1/4", 5/32", 7/32", 1/8", 3/16", 5/64" and 1/16". Includes: 9 piece ball profile roll pin punch set with 5/16", 3/32", 5/32", 1/4", 7/32", 1/8", 3/16", 5/64" and 1/16". Storage: comes in molded plastic case to keep everything organized and in one place. Comprehensive kit: combines the roll pin Starter set and the ball profile roll pin punch set with a gun smithing hammer.
BrandWheeler #ad
ManufacturerBattenfeld Technologies #ad
Height2 Inches
Length9 Inches
Weight2 Pounds
Width6 Inches
Part Number110128
Model110128

7. Axageid

#ad

Xage 9 Pieces Roll Pin Punch Set and 4 Pieces Hollow End Starter Punch Tool with Carry Case

#ad
Axageid #ad - 9pcs roll pin punch set including 1/16”, perfect tool for gunsmith, woodwork and crafts, 5/32”, 5/64”, engineers, watchmakers building, 5/16”size, machinery, vehicles, 7/32”, 1/4”, carpenters - use on guns, 1/8”, 3/32”, 3/16”, jewelers, excellent tool for adding into your armorers wrench package.

This 9pcs roll pin punch set and 4pcs hollow end starter punch set come with red carrying bag, easy to use, carry, storage or hang this tool set. Hollow end roll pin punch set helps to prevent damage caused by an accidental slip off while getting the pin started. 9 pieces roll pin punch set is made of highly quality hardened 40# steel, heat treated & knurled steel for extreme durability, drop forged, workability, 4 pieces starter punch tool is made of highly quality stainless steel.4

4 pcs hollow end starter punch set including 1/8”, will cover all of the AR platform including trigger guard, 3/16”, gas block, 5/32”, 7/32”, and forward assist.
BrandAxageid #ad
ManufacturerAxageid #ad
Weight0.97 Pounds
Part NumberXage- Punch set-1

8. Pridefend

#ad

BC Punch, BCG Cleaning Scraper, Hammer with Replaceable Heads, Roll Pin Starter Punch, 18-Pieces Gunsmithing Hammer Punch Set, Pridefend Gunsmith Punch Set

#ad
Pridefend #ad - 4 pieces hollow end starter punch set including 1/16”, 5/64”, 3/32”, 1/8” are designed to hold the pin when start punching to prevent accidental slip off.6 pieces roll pin punches including 2 pieces 1/16”, 2 pieces 5/64” and 2 pieces 3/32”.

This set comes with 4 interchangeable hammer heads to screw onto hammer. 2 pieces bc punch, the installation punch keeps hold of the bc pin while starting it and the second roll pin punch will drive it home nicely. After hundreds of times experiments, we improved and reinforced the material. They are made from hardened chrome-vanadium steel. The bcg carbon scraper is precision cut to match different surfaces on the bolt carrier group for fast cleaning. They are processed with special treatment for extreme durability. The driving faces can easily be switched between steel, rubber, brass, and nylon to meet different needs.
BrandPridefend #ad
ManufacturerPridefend #ad
Part NumberJWGM00188ZH

9. Grace USA

#ad

Gunsmithing, 4 piece, Gunsmith Tools & Accessories, BSP4, Grace USA, Brass Starter Punch Set, Brass Punches

#ad
Grace USA #ad - These high quality punches are machined From 5/16-Inch 360 Solid Brass Hex Stock. Comes in A Vinyl Pouch. This set includes 1/16", 3/32", 1/8" and 5/32" Punches. Made in the USA.
BrandGrace USA #ad
ManufacturerPro Ears #ad
Height0.5 Inches
Length3.2 Inches
Weight0.34 Pounds
Width9.2 Inches
Part NumberGRBSP4
ModelBSP-4
WarrantyLifetime Guarantee