As an Amazon Associate I earn from qualifying purchases.
1. Woodstock #ad
Woodstock D4089 Machinist Square Set, 4-Piece #adWoodstock #ad
- These squares are made from hardened, tempered and polished steel. Highly accurate for set-up and layout work. All have common beam and blade widths and thickness. Set includes 2", 3", 4" and 6" squares.
2. Boomgood #ad
Machinist Square Precision Engineer Wide Seat Square 90 Right Angle Ground Hardened Steel Angle Ruler 3.2 x 2 Inch #adBoomgood #ad
- The small plastic case it comes with makes sure that it will always remain THE standard of square for you from now on. Precision: din 875 grade 1, designed for precision layout, machine set-up and laboratory use.
These squares are made of hardened, tempered and polished steel, beams and blades are ground and polished for parallelism;The blade is permanently fixed to the beam by means of tapered self locking rivets which ensure complete rigidity.
3. 2 inch blade and 2 inch beam, length of blade is measured from corner edge of beam to end of blade. Squares are true right angles both inside and outside.
3. Deadwood Crafted Tools #ad
DCT Engineer Square, Precision Square Machinist Square Set, Woodworking Square Steel Square 4 Inches Small Square #adDeadwood Crafted Tools #ad
- No moving parts: blade and beam of this small precision square are fastened together; No need to worry about your project slipping or either piece getting separated or lost in your tool kit; Small engineering square allows you to measure on-site. No more guesswork: this square machinist engineering square includes clear markings along the blade to eliminate guesswork; One side includes SAE measurements up to 4 inches, other with metric 10cm; Blade allows for a margin of error close to 00006 inches 0015mm.
Easy to use: precision square machinist engineer square includes a notch for ultimate accuracy; Simply align your work to the precision machinist square and mark your measurements; Use for your woodworking and metalworking projects at home or at work.
Quality you need: depend on the durability and strength of this machinist square measuring tool; Precision steel square crafted of stainless steel with polished edges that are not sharp; Blade of the machinist square measures 1/16th inch thick 1. 5mm and beam 3/8th inch thick 8. 5mm. Precise and accurate: when crafting a woodwork or metalwork project, accurate measuring and precise markings are a must; Use the DCT Machine Square Woodworking 90 Degree Square for setting up perfect measurements.
4. T Tulead #ad
T Tulead 63x40mm Machinist Square Steel Machinist Ruler Precision Square Right Angle Measurement Woodworking Machinist Tool #adT Tulead #ad
- Package content:1 x Machinist Square. Fit for measuring right angle, the base is more thicker, not easy to tilt. Total size:63x40mm/2.
48"x1. 57"l*w. High quality of #45 steel, bright surface, durable, not easy to scratch. Right angle and clear specifications design, measurement data is more accurate.
5. Weewooday #ad
Engineer Square Machinist Square Set Mechanical Steel High Precision Square Woodworking Wide Base Square Tool Wide Sitting Angle Square L-type Measuring Tool for Engineer Student 4 x 2.5 Inch #adWeewooday #ad
- Nice work performance: the testing machinist square can be applied to various engineering measurements, it can accurately measure the vertical deviation of internal and external angles; The accurate 90 degree angle has no difference, assuring the measurement data correct without error.
Nice craftsmanship: our machinist square has bright surface color and smooth base surface, as well as quality material; Without trace, it will let you have a nice and comfortable use experience. Safe and reliable: this precision square tool use rivet links design, as well as not inclined, so it will not endanger your safety; Besides, upright and stable, its chassis is heavy, so the measurement data is more accurate and easy to read.
Easy to identify: machinist steel square is engraved with dimensions and clear numbers, so you can quickly identify the data, which ensures that you can easily measure each right angle. Proper size: this machinist square rule is 4 inches in whole length, bottom length is 2. 5 inches and the long side thickness is 012 inch, and the base thickness is 05 inches; the proper size will ensure the accuracy of the measurement data, also allow you to hold the rule easily and firmly.
6. Gohelper #ad
Mini Small Square Center Finder Tool 90 degree precision machinist square Quick Measuring square edge Marking center finder for woodworking pocket layout square marking gauge carpenters square #adGohelper #ad
- Easy to carry: the edge marking center finder perfect little size to fit in your pocket and into the corners of small boxes and areas. Anodized orange surface, rust proof, durable and corrosion resistant. Wide application: come with double pins made you quickly determining exact centers on the edges of boards, quick check before drilling work, easily check that the board edges are square to the face, squaring your table and saw blades and square up chisel and plane blades in honing guide, It very handy for mini small square projects.
Extend body profile: small square tool outer dimensions 3. 93" x 2. 67" x 059", center marking hole suitable for allow larger pencils, extend design much more suitable for carpenters square woodworking which one generally needs something bigger, center marking hole bottom is 1/16" diameter for the pencil in a perfectly detailed precision centered position as you scribe the line.
Laser engraving scale: mark the "inch" scale on the side of the center finder ruler, durable and easy to read, the scales is accurate, it is very useful for measuring square work. High quality: mini center finder square tool is made of high quality aluminum alloy and stainless steel.
7. T Tulead #ad
T Tulead Machinist Square Precision Square Woodworking Square Right Angle Engineer Square 50x40mm/2"x1.57" #adT Tulead #ad
- With base 40x14. 5mm, easy for use, Perfect for precision layout and measurement. Size:50x40mm/2"x1. 57"l*w;total height:54. 5mm/2. 14". Package content:1 x Precision Machinist Square. Suitable for measuring angle and marking on parts. Made of high quality steel, durable, sustainable use.
|Brand||T Tulead #ad|
|Manufacturer||T Tulead #ad|
8. Groz #ad
4-in & 6-in Squares | 16 Micron Squareness | Hardened Steel | with Plastic Case | for General Purpose, Machinery & Woodworking Applications 01012, GROZ 3-Piece Machinist Steel Square Set | 2-in #adGroz #ad
- 100% accurate: these squares have true right 90 deg angles both on the inside and outside. Finely ground: both blade and stock are ground and lapped which ensures straightness and parallelism.
Complete: set includes 2-in, and 6-in 16 Micron Squareness, 4-in, comes with plastic carrying case. High quality: made from selected steel with hardened blades that are permanently fixed to the stock. General purpose: For everyday workshop, carpentry, machinery, and woodworking use.
9. T Tulead #ad
T Tulead Machinist Square 100x70mm Carbon Steel Machinist Square Ruler 90 Degree Engineer Tool Woodworking Square #adT Tulead #ad
- Package content:1 x Machinist Square. Ergonomic design for comfortable grip;Used in construction, woodworking, guide rails, machine tools, precision parts.
Check vertical straightness, also can be vertical scribe;Easy to carry outside for measuring. Made of high quality carbon steel, durable, sustainable use. Total size:100x70mm/3. 94"x2. 76"l*w.