Top 8 Marking Knife Narex – Wood Chisels

As an Amazon Associate I earn from qualifying purchases.

1. Narex

#ad

Narex Dual Double Bevel Striking Marking Knife with Blade from Hardened Mn-V Steel Heat Treated to HRc 61 822301

#ad
Narex #ad - Blade length is 1. 5" long and handle is 5. 25" long, overall length is 6. 75". Double bevel sharpened at 20 degrees and tip ground to 55 degrees. Blade is. 125" thick and. 580" wide. Blade made from highly allowed Mn-V steel and heat treated to HRc 61. Marking/striking knife is manufactured by small and highly respected edge tool maker in Czech Republic.
BrandNarex #ad
ManufacturerNarex #ad
Part Number822301
Model822301

2. Narex

#ad

Narex Unhandled Dual Bevel Marking Knife Kit with Finger Indents Stainless Steel Blade 0.060" Thick Blade

#ad
Narex #ad - The blade is made from aisi 420 corrosion resistant stainless steel and hardened and tempered to hrc 57. The dual bevel will mark distinct lines on both the right and left side of a part or guide. The bevels are precision ground on CNC machines.

If a handle is desired the kit comes with 2 brass pins to affix scales to the blade. This dual bevel spear point marking knife is made by Narex, a world-class edge tool manufacturer in the Czech Republic. The knife may require just a light stropping to remove a small wire edge to get it razor sharp and ready to use. The laser cut finger indents are useful for applying pressure closer to the tip. The blade is 5-7/8 inches long, 1/2 inch wide and come in 3 thicknesses: 0030", 0060" or 0100 inch thick.

The tip is ground to 55 degrees with a 25-degree grind on both bevels. This steel is a traditional knife steel and designed to take and hold a keen edge and resist corrosion. Scribe lines left by a marking knife can also locate and guide chisels and saws. It will leave crisp lines when marking with and against the grain and on end grain. The blade has a dual-bevel spear point tip.
BrandNarex #ad
ManufacturerMikov #ad
Height1 Inches
Length6 Inches
Weight0.13 Pounds
Width1 Inches
Part NumberV2004070NX

3. Narex

#ad

Narex Dual Bevel Marking Knife Stainless Steel Blade Rosewood Handle Finger Indents 0.060" Thick Blade

#ad
Narex #ad - The blade is made from aisi 420 corrosion resistant stainless steel and hardened and tempered to hrc 57. The square handle profile prevents the knife from rolling off the bench. The knife may require just a light stropping to remove a small wire edge to get it razor sharp and ready to use.

This dual bevel spear point marking knife is made by Narex, a world-class edge tool manufacturer in the Czech Republic. It will leave crisp lines when marking with and against the grain and on end grain. A good marking knife can produce crisp and well-defined marks on wood essential when laying out precision joinery or transferring measurements. The blade is 1-7/8 inches long, 1/2 inch wide and comes in 3 thicknesses, 0030", 0060" or 0100 inch thick.

The handle is 3/8-inch-thick and made from mexican rosewood which has been hand sanded and polished. The tip is ground to 55 degrees with a 25-degree grind on both bevels. The bevels are precision ground on CNC machines. The laser cut finger indents are useful for applying pressure closer to the tip. The blade has a dual-bevel spear point tip.
BrandNarex #ad
ManufacturerMikov #ad
Height1 Inches
Length6 Inches
Weight0.13 Pounds
Width1 Inches
Part NumberV2004070NX

4. Narex

#ad

Narex Right Hand Marking Striking Notching Violin Knife 813701

#ad
Narex #ad - Blade is made from hardened and tempered high speed steel. This knife is manufactured by highly respected tool maker in Czech Republic. Skew is 30 degrees and bevel is 35 drgrees. Blade is beveled on one side only to keep the cut absolutely tight to your rule or square. Blade is 1/2 inch wide by 1/8 inch thick and 6 1/4 inches long.
BrandNarex #ad
ManufacturerNarex #ad
Height1 Inches
Length6 Inches
Width2 Inches
Part Number813701
Model813701

5. Narex

#ad

Narex 822391 Marking Striking Knife Kit with Dual Double Bevel Mn-V Blade Hardened to Hrc 61 and Brass Ferrule 822391

#ad
Narex #ad - Knife comes super sharp and ready for use. The blade is made from mn-v steel and heat treated to HRc 61. The tang is 0210” wide by 0125: thick and 1. 25” long. The double bevel is sharpened at 20 degrees and tip ground to 55 degrees. Blade is. 125" thick,. 580" wide and 1. 5" long. Make a marking knife to your own unique design using this marking knife kit containing a blade and ferrule.
BrandNarex #ad
ManufacturerNarex #ad
Part Number822391

6. Narex

#ad

Narex Czech Steel Dual Bevel Carving Striking Marking Knife with Blade from Hardened Cr-Mn Steel Heat Treated to HRc 58 813800 One Pack

#ad
Narex #ad - Blade length is 2. 75" long and handle is 4. 125" long. Marking/carving knife is manufactured by small and highly respected tool maker in Czech Republic. Blade made from highly allowed Cr-Mn steel and heat treated to HRc 58. Single bevel sharpened ground at 25 degrees and dual bevels sharpened at 5 degrees on each side. Blade is. 090" thick and. 380" wide.
BrandNarex #ad
ManufacturerNarex #ad
Height2 Inches
Length12 Inches
Width7 Inches
Part Number813800
Model813800

7. Narex

#ad

Narex Czech Steel Super Thin Dual Bevel Dovetail Carving Striking Marking Knife with Hardened Cr-Mn Steel Heat Treated Blade to HRc 58 813900

#ad
Narex #ad - Marking/carving dovetail knife is manufactured by a highly respected tool maker in Czech Republic. Blade length is 2. 75" long and Beech handle is 4. 125" long. Blade is super thin at. 075" thick and. 380" wide. Dual bevels each sharpened at 7 degrees for a super sharp and very thin blade. Blade made from highly allowed Cr-Mn steel and heat treated to HRc 58.
BrandNarex #ad
ManufacturerNarex #ad
Part Number813900
Model813900

8. Narex

#ad

Narex 822001 Sloyd Carving Knife 2-1/4" Blade High Carbon Steel Hardened to HRc 61

#ad
Narex #ad - The 2-1/4” long blade is 1/2” wide and super thick at. 115”. The blade comes properly sharpened and ready to carve. The sharp, thin tip is perfect for executing fine details and working in tight spaces.

The 5-1/4” long ergonomic european beechwood handle provides a solid grip that is easy to control. Overall length is 7-1/2”. The curved cutting edge will slice through soft and hardwoods alike. The blade is forged from wear resistant high-carbon steel and treated to 62 HRc, which results in an edge that is both easy to sharpen and will stay sharp for a very long time. This traditional type of scandinavian carving knife is designed to be used for spoon carving, green woodworking, marking, chip carving, whittling and general wood carving.
BrandNarex #ad
ManufacturerNarex #ad
Part Number822001
Model822001