Top 7 IVAC Pro Tool – Vacuum & Dust Collector Replacement Parts

As an Amazon Associate I earn from qualifying purchases.

1. iVAC

#ad

IVAC Pro Switch 240 Volt with Remote for Dust Collectors

#ad
iVAC #ad - If your dust collector is 2 hp or more, please contact ivac technical Support at 8007755579 ext. 4 for advice before you buy! There are other options to automate your system.
BrandiVAC #ad
ManufacturerBCTINT Limited #ad
Height2.5 Inches
Length10.6 Inches
Width7.8 Inches
Part NumberRS24020NA
ModelRS24020NA

2. iVAC

#ad

IVac Pro 4'' Blast Gate

#ad
iVAC #ad - Ivac pro remote control and ivAC PRO Tool Plus Sensor sold separately. Self-cleaning mechanism with motor overload protection. Choose from automatic, wireless or switched wired operation. Powered by included 115V UL/CSA approved AC adaptor. 4" molded resin housing construction with motorized metal knife gate.
BrandiVAC #ad
ManufacturerBCTINT Limited #ad
Height5.91 Inches
Length4.72 Inches
Width1.57 Inches
Part NumberPBG-04-NA
ModelPBG-04-NA

3. iVAC

#ad

IVAC Pro 6" Metal Automated Dust Collector Blast Gate

#ad
iVAC #ad - Powered by included 115V UL/CSA approved AC adapter. Choose from automatic, wireless or switched wired operation. Self-cleaning mechanism with motor overload protection.
BrandiVAC #ad
ManufacturerBCTINT Limited #ad
Height6.6 Inches
Length23.3 Inches
Weight5.52 Pounds
Width10.3 Inches
Part NumberMBG-06-NA
ModelMBG-06-NA

4. iVac Pro

#ad

IVac Pro Switch Wireless Dust Collection Controller-240V 20A

#ad
iVac Pro #ad - Turn on delay helps avoid power surges. Wall mountable. Etl safety approved - conforms to ul std 244A and SCA STDC22. 2 no. Three-position mode switch: Auto/Off/On. Use with ivac pro tool Wireless Dust Collection Controller sold separately. 14.
BrandiVac Pro #ad
ManufactureriVac Pro #ad

5. iVAC

#ad

IVAC Pro Dust Collection Remote Control

#ad
iVAC #ad - Remote can be programmed to operate any combination of up to 8 tools and one dust collector, or up to 4 dust collectors in one shop. Uses two cR2032 batteries. 40 ft range. Fcc and ic certified. Developed especially for ivac's pro switch system, the Pro Remote works with an iVAC Pro Switch module to turn your dust collector on or off, whether used with or without a iVAC Pro Tool module. Colored in high visibility yellow and has a convenient belt clip for keeping it close around the shop.
BrandiVAC #ad
ManufactureriVAC #ad
Height5.91 Inches
Length4.72 Inches
Weight0.1 Pounds
Width1.57 Inches
Part NumberR115240NA
ModelR115240NA

6. iVAC

#ad

Automated Vacuum Switch

#ad
iVAC #ad - 2640 total watts two input power cords permit operation from two separately protected circuits. Turn off delay ensures that your work area continues to be cleared of remaining airborne debris. Turn on delay avoids the two power surges occurring at the same time. No venting holes the ivac's internal components are designed to generate very little heat. Dust collector / shop vacuum up to 1HP or 5 Peak HP. Modes of operation: auto, off and on.
BrandiVAC #ad
ManufacturerBCTINT Ltd #ad
Height2.2 Inches
Length10.8 Inches
Weight1.5 Pounds
Width7.8 Inches
Part Number10031-010
Model10031-010

7. Ortis

#ad

Ortis Dust Control Autoswitch for More Power Tools, Delay Vacuum On/Off to Prevent Circuit Overload and Tripping, Automatic Vacuum Switch, Adjustable Actuation Threshold

#ad
Ortis #ad - New generation: addition of two tool outlets, no need extra extension socket, avoid messy cords and save time; Three vacuum run modes can be switch freely: Auto, off and on; the values are clearly displayed with LED indicators, each key for corresponding option, easier to check and set.

Prevent vacuum from running too long or being unable to shut off after tool has stopped. Compatibility: supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Planers etc. Configurable actuation threshold: 30w/60w, you can select flexibly appropriate actuation threshold according to your actual condition. Max motor rating should not exceed 120v/15a 50/60Hz, Routers, Power Sanders, Joiners, Table Saws, 1875W. Turn on delay & safety: automatic delays 1s to turn on the vacuum when you start your tool, which avoids circuit overload or tripping.

Adopting ul-certified american Standard 14AWG power cord which allowable passage with a large current more than 30A. Thick copper core, covered with PC+ABS V0 grade flame retardant material, less heat during use and extend service life. Configurable shutoff delay time: automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency.
BrandOrtis #ad
ManufacturerOrtis #ad
Part Numberhvc-03