Top 10 Strain Relief Cord Grip – Electrical Pulling Grips

As an Amazon Associate I earn from qualifying purchases.

1. Leviton

#ad

Straight, Leviton L7504 3/4-Inch, Wide-Range Strain-Relief, .520, .730 Cord Range, Male, Steel Body

#ad
Leviton #ad - Strain-relief grips are used to Connect Cord or Cable to Electrical Enclosures and Equipment. Wide-range grips are recommended for use in the Wiring of Enclosures, Power Boxes, Machine Tools, and Power Centers. Grips prevent pullout due to Tension and Limit the Arc of Bend at the Point of Entry. Fitting Style: Straight. Strain is distributed over the Length of Mesh Rather than Concentrated at One Point or Transferred to the Internal Termination.
BrandLeviton #ad
ManufacturerLeviton #ad
Height0 Inches
Length0 Inches
Weight0.2 Pounds
Width0 Inches
Part NumberL7504
ModelL7504
Warranty2-Year Limited

2. MGI SpeedWare

#ad

MGI SpeedWare Strain Relief NPT Nylon Cord Grip Cable Glands, 20 Pack 1/4", Black

#ad
MGI SpeedWare #ad - Easy installation — simply pass your cable through the gland and tighten the cap. Versatile — used on all types of electrical, industrial, and automotive equipment and machinery. Outer drill Diameter: 054". Fits 010" to 025" 3 - 6mm. Resistant to salt water, alcohol, oil, weak acid, grease and common solvents. Wire protection — provides strain relief to cables and wires passing through plates or connecting to electrical equipment. Professional look — black nylon cable glands are used by professionals everywhere. Waterproof — ip68 rating allows for underwater use.
BrandMGI SpeedWare #ad
ManufacturerMGI #ad
Part NumberWC-CG-1/4

3. Leviton

#ad

Wide-Range Strain-Relief, Leviton L7503 1/2-Inch, .540 Cord Range, .400, Straight, Steel Body, Male

#ad
Leviton #ad - Strain-relief grips are used to Connect Cord or Cable to Electrical Enclosures and Equipment. Wide-range grips are recommended for use in the Wiring of Enclosures, Power Boxes, Machine Tools, and Power Centers. Grips prevent pullout due to Tension and Limit the Arc of Bend at the Point of Entry. Strain is distributed over the Length of Mesh Rather than Concentrated at One Point or Transferred to the Internal Termination. Fitting Style: Straight.
BrandLeviton #ad
ManufacturerLeviton #ad
Height0 Inches
Length0 Inches
Weight0.2 Pounds
Width0 Inches
Part NumberL7503
ModelL7503
Warranty2-Year Limited

4. JACKYLED

#ad

Cable Glands 50 Pairs JACKYLED Black Strain Reliefs Connectors Cord Grips for Wiring Pendant Hanging Light Ceiling Lighting

#ad
JACKYLED #ad - 2 parts are needed per cord, one on the canopy and the other on the socket. Application: perfectly fits for hanging Lights, glass insulator lights for table-top and floor use as well as many other applications, ceiling lights, pendant lights, include wiring fans and small appliances.

30-day money-back guarantee for any reason, 12-month warranty for quality-related issues. If you have any issues, inquiries or need assistance, please feel free to contact us directly. Feature: 50 pairs of black cable glands are standard m10 cable glands that can be screwed into the base of any standard lamp socket eg. A ceiling mount, perfectly protecting the cable, and are not easily loosened or rotated after tightening, so as to effectively improve the service life of the socket.1

100% satisfaction guarantee: we strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. Fireproof material: made of high-quality thermoplastic polymer PBT, they protect wire cord/cable from ignition and keep electrical wiring in good condition. Easy to use: just screw it into the existing fixture and it looks like it's part of the socket, and it will relieve tension at the joint.
BrandJACKYLED #ad
ManufacturerJACKYLED #ad
Height4.2 Inches
Length1.6 Inches
Weight0.11 Pounds
Width6 Inches
Part NumberJK126-SR50
ModelJK126

5. Arlington Industries

#ad

10-Pack, Arlington LPCG50-10 1/2-Inch Strain Relief Electrical Cord Connector

#ad
Arlington Industries #ad - A sealing ring is furnished to assure a liquid-tight seal when installing in a non-threaded opening. Requires 30 percent less area to mount. The cord connector nut needs only to be hand tightened to develop a liquid-tight seal and superior pull out resistance. Doubles cord size range. Has a unique grommet with gripping fingers.
BrandArlington Industries #ad
ManufacturerArlington Industries #ad
Height0.2 Inches
Length5.6 Inches
Weight1 Pounds
Width4.5 Inches
Part NumberLPCG50-10
ModelLPCG50-10
WarrantyIn the event any of our products are found to be defective, we will replace them with new product free of charge. The time limit for this warranty is one year following the date of sale or one year after the date of installation, whichever is the earlier date. This warranty does not apply when the product is used for any purpose other than the intended use as described in the Arlington literature. This warranty does not apply when the product is used for any installation which would violate the national electrical code or any code which takes precedence in a particular jurisdiction. Labor is not included.

6. Awpeye

#ad

Cable Glands Joints Wire Protectors- Pg7, Cable Gland Nylon Plastic Waterproof Adjustable, Pg16 35pcs, Pg13.5, Pg9, Pg11

#ad
Awpeye #ad - No need for disassembly. Make of 3parts, main body, seal, lock nut, sealing nut, easy to use and install. Total 35PCS. Easy application - cable can be inserted through directly then tighten easily. High quality cable gland Kit, Applied to Cable Fixing, Waterproof Design. Material: polypropylene nylon pa66, flame retardant etc; Working Temperature: -40℉ - 212℉, Heat resistant, alkali and alcohol resistant, Acid, maximum to 248℉. Model - five model from pg7, pg16, pg11, pg13.5, pg9, pg19.
BrandAwpeye #ad
ManufacturerAwpeye #ad
Part NumberCable-gland

7. Leviton

#ad

Leviton L7505 1-Inch, Male, Straight, Wide-Range Strain-Relief.700.970 Cord Range, Steel Body

#ad
Leviton #ad - Strain is distributed over the Length of Mesh Rather than Concentrated at One Point or Transferred to the Internal Termination. Strain-relief grips are used to Connect Cord or Cable to Electrical Enclosures and Equipment. Npt size: 1. Wide-range grips are recommended for use in the Wiring of Enclosures, Machine Tools, Power Boxes, and Power Centers. Grips prevent pullout due to Tension and Limit the Arc of Bend at the Point of Entry.
BrandLeviton #ad
ManufacturerLeviton #ad
Height1.18 Inches
Length1.97 Inches
Weight0.2 Pounds
Width0.39 Inches
Part NumberL7505
ModelL7505
Warranty2-Year Limited

8. Woodhead

#ad

1100lb Approximate Break Strength, .41–.56" Cable Diameter, Bus-Drop, 9.00" Bale Length, 5.00" Mesh Length, Galvanized Steel, Woodhead 36564 Support Grip, Single Eye

#ad
Woodhead #ad - For maximum strength, this cable support grip uses single weave mesh structure. The cord grip eliminates the use of additional hardware for cable placement. Application: this grip is used with bus drop cables.

The cable pulling grip is often used for cable drops associated with electrical connections, primarily indoors. Wire grip: bus drop cable grip attaches to most fixed structures with ease. This mesh support grip finds common application in light-duty cable placement/repositioning. Steel mesh grip: the locking bale cable grip is made from galvanized steel for maximum strength.

And maintains an approximate break strength of 1100lbs. Specifications: the single eye cable grip has a mesh length of 5 in. Bale length of 9 in. High durability: the closed mesh grip made from galvanized steel has a top-mounted eye protector that boosts the overall stability, gripping strength, and durability. It has a cable diameter of 041–056 in.
BrandWoodhead #ad
ManufacturerMolex #ad
Part Number36564
Model36564

9. LOKMAN

#ad

PG7, PG13.5, Cable Gland -LOKMAN 34 Pack Plastic Waterproof Adjustable 3-16mm Cable Connectors Cable Gland Joints With Gaskets, PG9, PG11, PG16,PG19 With Durable PP Storage Case Cable gland kit

#ad
LOKMAN #ad - Model - five ip68 cable gland model from pg7, pg16, PG9, pg11, PG13.5, pg19. High quality - made from high quality nylon PA66 plastic.

Packed with quality and durable storage case. No need for disassembly. Waterproof - ip68 tested certificate cable glands come with gaskets for the bulkhead mounting. Easy application - cable can be inserted through directly then tighten easily. It makes the seal against the inside of the surface you're installing them on. Thus they are waterproof. Total 34 pack. Ideal kit for your project needs. Widely cable range - widely cable range from 012 - 063inch/ 3 - 16mm cable gland assortment kit.
BrandLOKMAN #ad
ManufacturerLKM #ad
Part NumberLKM-CGL

10. CW-Mart

#ad

CW-Mart Light Wire Strain Reliefs 50 Pairs Black, Cable Glands for Pendant Ceiling Lighting Fixture, Cord Grips

#ad
CW-Mart #ad - Suits for many kinds of ceiling canopy, ceiling lights cable gland, holders and wires for pendant lights, etc. Black, plastic, 50 Pairs Packing. These cord grips are used for fixing & protecting the connection of the wiring with the lighting accessories like holders, ceiling, etc. :. M10 standard connection strain reliefs, high quality, easy to use, reliable. We would be really appreciated if you could share any reviews about our product being used.
BrandCW-Mart #ad
ManufacturerCW-Mart #ad
Part NumberCW-001