Top 10 Rabbet Router Bit 1/2 Shank – Edge Treatment & Grooving Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. SellyOak

#ad

SellyOak Multi Rabbeting Router Bit Set for Multiple Depths 1/8", 1/4", 1/2 Inch Shank Rabbet Router Bit with 6 Bearings Set, 7/16", 1/2" Interchangeable and Adjustable Bearings, 5/16", 3/8"

#adSellyOak #ad - Premium material: rabbet router bit, Solid Hardened Steel Bodies with carbide blades, which run effortlessly through all Composition Materials. For cutting various materials: this rabbet router bit can be used for hard wood, synthetic board and so on, softwood, but to avoid processing materials that are too hard.

Specify for rabbet cuts in the wood work project for any art or craft. All dimensions and weight are in description below. Wide in use: reliable rabbet router bit for DIYer and 100% satisfy to experienced woodsmith. Warm reminder for our customers: Please check the shank size for your router takes to avoid ordering in mistake. Cutting depth 1/8 to 1/4-inch: rabbet router bit set with Interchangeable bearings to cut rabbets of different depths producing smooth cuts on both surfaces by replacing bearing.

Brand	SellyOak #ad
Manufacturer	PUSU Electrical Co., Ltd. #ad
Part Number	RT-R002

2. Yonico

#ad

Yonico Rabbet & Bearing Router Bit Set Large 1/2-Inch Shank 14706

#adYonico #ad - For use on table mount and handheld router. Silver induction brazing for maximum strength and durability. Cut 1" rabbets in a variety of depths up to 3/4" deep. Premium c3 micro-grain tungsten carbide blades for a sharper & longer lasting edge. Includes 1 large rabbet router bit and 6 bearings.

Brand	Yonico #ad
Manufacturer	Yonico #ad
Height	3 Inches
Length	6.25 Inches
Weight	1.3 Pounds
Width	5.25 Inches
Part Number	14706
Model	14706

3. WSOOX

#ad

7/16", WSOOX 1/4 Inch Shank Rabbet Router Bit Set, 3 Pieces Rabbeting Router Bit with 6 Bearings Set 1/8", 3/8", 1/4", 1/2" Bearings, 5/16"

#adWSOOX #ad - 3 different cutting height:1/4", 1/2", 3/8", with 6 interchangeable bearing used for cut different depths 1/2", 7/16", 3/8", 3/16", 1/4", 5/16", 1/8", 1/16". Applicable materialthis professional rabbeting bit set suitable for wood, plywood, particle board, MDF, acrylic and different wood composites.

Router bit set3 pcs rabbet router bit with 1/4" shank. Quality bladethe blade is made of high-quality YG8 carbide steel, which is sharp, durable and impact resistance. Teflon coatingbaking heat-resistant coating to prevent accumulation of wood chips, resin and asphalt, good wear resistance and long service life. It can cut the wood smoothly and not easily broken. Please note: the short clamping of this router bit might cause bend. Compatible machinesuse on cnc and other automatic routers as well as hand-held and table-mounted portable routers.

Brand	WSOOX #ad
Manufacturer	WSOOX #ad
Part Number	WY743B
Model	WY743B

4. HOHXEN

#ad

3/4",7/8", 5/8", HOHXEN Rabbet Router Bit 1/2 Inch Shank with 6 Bearings Set Rabbeting Router Bits, Adjustable Bearings 3/8", 1/2", 1-1/8"

#adHOHXEN #ad - The router bit is packed in a plastic box for easy storage and carry. You can complete your work accurately, and satisfy your pursuit of exquisite DIY while you use it easily. We offer "24 month" warranty on item that confirm to be manufacturer defect. Professional quality rabbet router bit the router bit cutter material is YG6 solid hardened steel with anti-kickback design.

For cutting various materials suitable for solid woods, iron, acrylic and etc. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. Perfect after-sale service we always provide good customer service and purchase experience to our customers. Premium c3 micro-grain tungsten carbide blades provides increased strength and utmost resistance. Note: the short clamping of this product might cause bend. Bearing dia: 3/8", 3/4", 5/16", 1/2", 1/4", cutting height: 1/2", 7/16", 7/8", Rabbet Cutting Depths: 1/2", 1-1/8".

If you have any questions, please email to our after-sale team, we will try our best to solve your problem. Size of the rabbet router bit the router bits shank: 1/2", 3/8", 5/8", 1/8". Please avoid cutting ferrous metal and non wood materials, such as:steel, plywood compact panel, particle board, MDF, laminate, sand, etc. Multi-purpose use the rabbet router bits is suitable for all range's router such as handheld router and table router.

Brand	HOHXEN #ad
Manufacturer	HOHXEN #ad
Part Number	WJ-HO-5017-1/2-FBA

5. FIVEPEARS

#ad

Fivepears 1/4 Inch Shank Rabbet Router Bit with 6 Bearings Set, 1/4", 5/16", 3/8", Rabbeting Router Bit can Interchangeable and Adjustable Multi Depths Cutter 1/8", 1/2" …, 7/16"

#adFIVEPEARS #ad - Tooth width: 1/2 inch, 5/8", shank dia: 1/2 inch, 3/4", 1/2", bearing Dia: 3/8", 7/8", 1-1/8". When using, it should be noted that at least clamp to the "min insert" line, and the RPM≦160001. Durable - high-quality yg6x carbide inserts bring you a cleaner and smoother experience, and the strong wear resistance makes the set able to withstand the test of time in heavy-duty use.

4. Rabbet router bit kit - includes 1/4 inch shank rabbet router bit and 6 pieces bearings set. 2. Safety - fivepears's rabbet router bit set with anti-kickback design provides higher stability and less vibration. Do not cut metal and non-wood materials such as: steel, particleboard, plywood, etc.

Your problem will be resolved within 24 hours. Use on hand-held and table-mounted portable routers. Pushing slowly can help you get a smoother and cleaner cut. 3. Widely used - this rabbet router bit is suitable for wood, iron, MDF, sand, compact panels.5. No risk - if you have any questions about the product, please contact us.

Brand	FIVEPEARS #ad
Manufacturer	FIVEPEARS #ad
Part Number	WYL1800-1

6. Whiteside Router Bits

#ad

Whiteside Router Bits 1955 Multi Rabbet Set Carbide Tipped 1-3/8-Inch Large Diameter and 1/2-Inch Cutting Length

#adWhiteside Router Bits #ad - Set is organized in a 4'x4'x3' box. Large diameter: 1 3/8", cut length: 1/2", Shank Diameter: 1/2". Can cut the following size rabbets using the bearings included:Flush Trim, 7/16", 1/8", 1/4", 3/16", 5/16", 3/8", 1/2".1/2" x 1/2" is the maximum rabbet size. Hex wrench is included.

Brand	Whiteside Router Bits #ad
Manufacturer	Whiteside #ad
Height	6 Inches
Length	3 Inches
Weight	1 Pounds
Width	4.5 Inches
Part Number	1955
Model	1955

7. YAKAMOZ

#ad

1/4", 3/8", 1/2", 7/16", 5/16", Yakamoz 1/2 Inch Shank Rabbeting Router Bit Rabbet Router Bit Set with 6 Bearings Set for Multiple Depths 1/8"

#adYAKAMOZ #ad - Solid hardened Steel Bodies with Anti-Kickback Design. 1/2 inch shank industrial quality Router Bits, Build-up & Heat Resistant Teflon Coating. Made of cemented Carbide and long-lasting performance. Interchangeable bearings to cut rabbets of different depths: 1/8, 1/4, 5/16, 3/8, 7/16 and 1/2-Inch. For rabbeting of different size on wood and wood composites.

Brand	YAKAMOZ #ad
Manufacturer	Yakamoz #ad
Weight	0 Pounds
Part Number	GY0127

8. CMT

#ad

CMT 835.501.11 Variable Depth From 1/8-Inch to 1/2-Inch, 1/2-Inch Cutting Height, 1/2-Inch Shank Rabbeting Router Bit Set

#adCMT #ad - Bit, bearings and hex key are included. For rabbeting of different size on wood and wood composites. 2 sinterhip hi-density Industrial Chrome Carbide for long-lasting performance. Cutting depth 1/8 to 1/2-inch by replacing bearing, 1-3/8-Inch Diameter & 3/4-Inch Cutting Length. Anti-kickback design.

Brand	CMT #ad
Manufacturer	CMT #ad
Height	1.38 Inches
Length	2.34 Inches
Weight	0.85 Pounds
Width	1.38 Inches
Part Number	835.501.11
Model	835.501.11
Warranty	Limited lifetime warranty: cmt carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your cmt router bits, and the bits were used for their recommended applications, you can return them to cmt for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits.

9. SellyOak

#ad

1/4 Inch Shank Rabbet Router Bit with 6 Bearings Set, 5/16", 1/4", 1/2" Interchangeable and Adjustable Bearings, SellyOak Multi Rabbeting Router Bit Set for Multiple Depths 1/8", 3/8", 7/16"

#adSellyOak #ad - Various cutting depth: interchangeable bearings to cut rabbets of different depths producing smooth cuts on both surfaces by replacing bearing. Specify for rabbet cuts in the wood work project for any art or craft.

Wide in use: reliable rabbet router bit for DIYer and 100% satisfy to experienced woodsmith. Warm reminder for our customers: Please check the shank size for your router takes to avoid ordering in mistake. For cutting various materials: can be used for hard wood, synthetic board and so on, softwood, but to avoid processing materials that are too hard. Premium material: solid hardened steel bodies with Anti-Kickback Design and heat- resistant Teflon coating, the blade is sharp and the bearings won‘t break. All dimensions and weight are in description below.

Brand	SellyOak #ad
Manufacturer	PUSU Electrical Co., Ltd. #ad
Part Number	RRB-2

10. SellyOak

#ad

5/16", Multiple Depths 1/8", SellyOak Multi Rabbeting Router Bit Set for 1/2 Cutting Width, 7/16", 3/8", 1/2" Adjustable Bearings, 1/4 Inch Shank 4-Wing Rabbet Router Bit with 6 Bearings Set, 1/4"

#adSellyOak #ad - Premium material: rabbet router bit, Solid Hardened Steel Bodies with carbide blades, which run effortlessly through all Composition Materials. Cutting depth 1/8 to 1/4-inch: rabbet router bit set with Interchangeable bearings to cut rabbets of different depths producing smooth cuts on both surfaces by replacing bearing.

Warm reminder for our customers: Please check the shank size for your router takes to avoid ordering in mistake. Specify for rabbet cuts in the wood work project for any art or craft. Wide in use: reliable rabbet router bit for DIYer and 100% satisfy to experienced woodsmith. For cutting various materials: this rabbet router bit can be used for hard wood, softwood, synthetic board and so on, but to avoid processing materials that are too hard. All dimensions and weight are in description below.

Brand	SellyOak #ad
Manufacturer	PUSU Electrical Co., Ltd. #ad
Part Number	RT-R-004