Top 10 Propane Torch Hose Extension – Propane Torches

As an Amazon Associate I earn from qualifying purchases.

1. Flame King

#ad

Flame King YSNMT48 Flexible 5 FT Extension Hose For 1Lb Propane Tank Cylinder

#ad
Flame King #ad - Belt clip to conveniently hold cylinder. 60" of flexible hose. Works on any cga 600 standard torch and cylinder. For best results, use with Flame King 1lb Refillable cylinder. Flame control valve easily sizes flame and extinguishes when finished.
BrandFlame King #ad
ManufacturerFlame King #ad
Height2 Inches
Length16 Inches
Weight0.11 Pounds
Width7 Inches
Part NumberYSNMT48
ModelYSNMT48
WarrantyLimited 30 Day warranty. Warranty voids if purchased from any seller that is not Amazon Retail or Flame King.30 Day Warranty voids if not purchased from Amazon Retail, Flame King

2. HighFree

#ad

HighFree 25 FT Propane Torch Extension Hose with 1/4" Ball fittings and NPT Thread Extension Appliance Hose

#ad
HighFree #ad - 350 psi rated propane gas hoses; works with most torches in the market. The extension appliance hose is 25 feet long and threaded with male and female ends to connect to the gas pipe and the appliance. Ul/csa listed hose, 5/16” id, with all Brass Fittings. This extension hose is durable and designed for use indoors with clothes dryers, ovens, water heaters, and other household appliances. 1/4-inch npt male fitting on one end, does not spin. 1/4-inch female flared b ball seat Female Pipe Swivel Fitting industry standard fittings, female end spins freely.
BrandHighFree #ad
ManufacturerWotone #ad
Height3.15 Inches
Length15.35 Inches
Width4.72 Inches
Part NumberHFR-007

3. MENSI

#ad

Grill, MENSI 25FT Propane Torch Extension Hose With 1/4" NPT Ball Fittings Female Thread and 1/4" Male NPT Thread on End for DIY Torch, Heater

#ad
MENSI #ad - 1/4-inch female flared b ball seat female Pipe Swivel Fitting industry standard fittings. Attention: This is Ball Flare Fittings. 1/4-inch npt male Fitting on one end. 350 psi rated propane gas hoses with 25 Feet. Csa listed hose 5/16” id with all Brass Fittings High pressure hose. Works with most other manufacturer’s torches and for Rv's hose extension use.
BrandMENSI #ad
ManufacturerMNS #ad
Weight2.65 Pounds

4. WORTHINGTON CYLINDER

#ad

Yellow, WORTHINGTON CYLINDER 309336 Series Extension Hose Kit for MapPro & Propane Torches

#ad
WORTHINGTON CYLINDER #ad - Package weight: 0431 kilograms. Package dimensions: 5. 08 l x 13. 97 w x 3048 h centimeters. Product type: Hardware Tubing. Country of Origin: United States.
BrandWORTHINGTON CYLINDER #ad
ManufacturerWORTHINGTON CYLINDER CORP #ad
Height1 Inches
Length1 Inches
Width1 Inches
Part Number309336
Model309336

5. Cybring

#ad

MAPP Gas Hose For 14 oz MAPP or 16 oz Propane Tank CGA 600 RH

#ad
Cybring #ad - Brass converter, solid and reliable. It has a hook to hang the MAPP cylinder with you. 60 inch hose for most usage scenario.
BrandCybring #ad
ManufacturerEW #ad

6. Sobalai

#ad

Welding, Propane Torch with Hose and Three Burners, Portable Propane Torch for Soldering, Mapp Gas Torch with Flame Control, Plumbing, Handheld Blow Torch with 50" Hose and Replacement Burner, Heating

#ad
Sobalai #ad - 4 replacement torch heads: the weed burner torch kit includes 4 torch heads, one 3/4 inch torch nozzle, and one 1-1/2 inch flat burner, one soldering tip, one 7/8 inch brazing tool for copper pipes, which can be used for various situations. Specifications: maximum rating value but/hr 6000 Suitable for standard 1 lb.

350 psi working pressure. Widely use: the propane torch kit can be widely used for welding, repairing jewelrywelding, barbecue, processing meat depilation, plumbing, melting ice and snow, brazing, asphalt, soldering, processing and drying woodmaintenance, removing paint from uninflammable surfaces, roof work, heating, and so on. Propane cylinders with a minimum 14. 0 oz capacity. No self ignitor. Easy&safe to use: install the adapter end to a qcc1/type1 & 1lb propane tank, and the 9-inch handle can keep your hand away from the torch tip and flame, then turn on the output knobs to start using.

Suitable for both propane and MAPP gas. Risk-free shopping: one year warranty! unconditionally free new replacement or full refund if you are not satisfied! Contact us if you have any question/problem! Totally risk-free shopping! The 50 inch long-reach hose ensures a safe distance between the flame the the propane cylinder, which makes the propane torch very safe to use.
BrandSobalai #ad
Manufactureryukang #ad
Part NumberLE
ModelLE

7. CSE

#ad

CSE 30 foot Replacement Hose Propane Push-Start Torch Weed Roofing Grill Tank POL to 9/16" LH

#ad
CSE #ad - Us g. 9, standard for us tanks compatability not guaranteED FOR NON-CSE TORCHES or DEVICES. Highest quality materials available, over 10 years of improved design and development. Fitting to tank: soft nose p. O. L. To torch or device: 9/16" female Lefthand Reverse Thread. To tank: male connector standard : en 15202 / machined: 22. 3 mm / pitch tpi: 14 / pitch 1. 814 mm / nominal Diameter: 0880” / thread standard: ngo / interface: Internal Direction: LH / Wrench size: 23mm. Compatability not guaranteed for non-cse torches or devicES. Since 2009.
BrandCSE #ad
ManufacturerCSE #ad
Height4 Inches
Length40 Inches
Width4 Inches
Part NumberPropane Torch

8. Hot Max

#ad

25 Feet, Hot Max 24201 Extension/Appliance Hose for Propane Gas

#ad
Hot Max #ad - 1/4-inch female flared b ball seat Female Pipe Swivel Fitting industry standard fittings, female end spins freely. 350 psi rated propane gas hoses. 1/4-inch npt male fitting on one end, does not spin. 25’ extension hose, 1/4” npt male x 1/4” Female Flared B Fitting. Ul/csa listed hose 5/16” iD with all Brass Fittings. Works with all hot Max torches and most other manufacturer’s torches.
BrandHot Max #ad
ManufacturerHot Max #ad
Height4 Inches
Length12.5 Inches
Weight3.15 Pounds
Width12 Inches
Part Number24201
Model24201

9. Bernzomatic

#ad

Bernzomatic BZ8250HT Trigger-Start Hose Torch

#ad
Bernzomatic #ad - 5-foot hose for maximum accessibility and mobility. High intensity swirl flame targets heat output and provides a hotter, more efficient flame. Instant on/off trigger igniter for simple one-handed operation. Solid brass regulator is Pressure-regulated to burn in any direction. Adjustable flame control knob for ease in switching between different applications.
BrandBernzomatic #ad
ManufacturerBernzomatic #ad
Height13.7 Inches
Length4 Inches
Weight1.7 Pounds
Width10.8 Inches
Part Number384398
Model384398

10. TAUSOM

#ad

Mapp Welding Propane Torch 1.5m Hose Fit,Fuel by MAPP MAP Pro Propane CGA600 Cylinder Bottle, Jewelry,Heating,Gifts for Men, Soldering, for Brazing, HAVC

#ad
TAUSOM #ad - Large diameter brazing-easy to be used in any spaces, brazing copper tubing, melting, Manual ignition, heating, thawing pipes, wood working, can easily handle soft soldering tasks, remove paint and tiles, and many other home and professional purposes.

Easy to use-adjustable flame size control knob, you can switch the flame modes for different job needs by adjust the air input amount. Gas cylinder use-portable hand 1. 5m hose torch, easy to be used in any spaces, Smart sized, torch run off MAPP, Manual ignition, MAP Pro and Propane. The hand torch can be used with cylinder clamps and secure the gas cylinder at any convenient places, just take the torch and work around.

3. 6 ft hose included-3. 6' long hose and ergonomic handle design, provide more working flexibility and comfortable grip. Real durabgle-torch body and regulator are constructed with full brass for best ouput and wear resistant. Perfect tool for plumbing, crafts and hobbies, camping and outdoor activities, DIY tasks, Jewelry and beads making, automobile repair and body works, air-conditioning, and etc. High flame temperature up to 3600℉.
BrandTAUSOM #ad
ManufacturerTausom #ad
Weight1.43 Pounds