As an Amazon Associate I earn from qualifying purchases.
1. Mophorn #ad
Mophorn 50Amp Non-Touch Pilot Arc Plasma Cutter, 110/220V Dual Voltage Plasma Cutting Machine, Portable Cutting Machine IGBT Inverter Digital Plasma Cutting Equipment, Max 1/2 Inch14MM Clean Cut #adMophorn #ad
- Pwm controlled output, lower power consumption. Non-touch pilot arc: pilot arc torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag；Pilot arc technology allows you to cut without touching the tip to the metal.
In the event of product damage or missing parts, repair & maintenance, ducting work, manufacture, mild steel, aluminum, please feel free to contact us and we will solve it for you within 24 hours. Advanced inveter technology, 85% inverter efficiency.
Safety protection over-heat, over-current and iP21 level protection. Better cutting quality and longer consumable life. 14mm cutting thicknesssupport 1-14mm thickness metal cutting. Faster cutting speed, low noise and smooth cut surface.
High efficientmax 50amp output current, stepless adjustable with lcd display. Voltage compensation to tackle with +/-15% electricity fluctuation. Wide applications suitable to cut most metals, alloy, like: stainless steel, metal processing, carbon steel etc. Air regulator at back, over-pressure, easy to adjust air pressure. 60% high duty circle. Can be widely used at automotive, site work etc.
|Part Number||Non-Touch Plasma Cutter|
|Model||50 Amp Plasma Cutter Non-Touch Pilot Arc|
2. Cuwiny #ad
IGBT,14mm Clean Cut,16mm Max Severance, Pilot Arc Plasma Cutter, Iron and Aluminum, Fit For Carbon Steel,Copper, Cuwiny 50 Amp Dual Voltage 110/220v Non-Touch Pilot Inverter Air Plasma Cutting Machine #adCuwiny #ad
- Output & performance: 10-50 a dc output, 1/2” ideal clean cut and 5/8” maximum severance cut under 220/240V. Duty cycle: 60%. Automatic indicate the voltage no need to switch by handle from 110v to 220v. Air regulator and hight quality accessories: our plasma cutters use a better air regulator and are equipped with a plastic tape, which is the best air regulator on the all market.
Uses non-hazardous compressed air to cut, Aluminum, Alloy Steel, safe and at low cost. We offer 30-day 100% satisfaction or money back guarantee and 1 year limited warranty.
10-35a dc output, 2/5" ideal clean cut and 1/2" maximum severance cut under 110/120V. Igbt advanced Inverter Plasma Technology. Better use 63Amps power breaker for this machine. Pilot air plasma cutter: suitable cutting for stainless steel, copper, mild steel, etc.
It is high frequency arc starting plasma cutter. They solve a very distressing problem of other products on the market: the regulator can't get air pressure. We offer a full range of quality accessories and AG60P pilot arc torch, work with standard parts, you easy to find the consumables from our Cuwiny shop. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
3. Flameweld #ad
FC500DP CUT50DP Dual Voltage 110/220V Plasma Cutting Machine Inverter 50/60Hz 16mm Max Cutting Thickness FC500DP, FlameWeld Pilot Arc Plasma Cutter #adFlameweld #ad
- The current for this plasma cutting machine 50amps in 220v, max cutting thickness 16mm#65PSI 220V 50Amps; At 110V 35Amps, 35Amps in 110V. For cut copper 2-3mm#60PSI06mps220v 50amps is suggested. Cutting thickness: this plasma cutter easy cut all metals especially stainless steel.
There are two voltage lights at front of panel, led 220v will lighting up when connect machine to power 220V, auto indicate 110 or 220v, the cutting machine is designed dual voltage 110/220V, LED 110V lighting when connect machine to 110V, Therefore the user easy read voltages of machine.2
2 meters air hose, also with 1 pc wire adaptor from 110V to 220V. Dual voltage 110/220v, handle swift is not required at machine. 4meters ag60p pilot arc cutting torch coming with machine, earth clamp with 2 meters lead, 5 pcs tip.
The plasma cutting machine is high frequency no need to touch metal get arc starting, Machine with Pilot arc function. Quality accessories, 5 pcs torch electrodes, 1 set air regulator with air gauge. Machine come with 110v power plug, We only producing high quality machine and supplying quality accessories. Quality cutting thickness for steel is 10mm#65psi065mpa 220v 50amps, the quality cutting thickness is 8mm#60PSI0
4. LOTOS #ad
Lotos LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Brown, Dual Voltage 110V/220V, 1/2 Inch Clean Cut #adLOTOS #ad
- Uses non-hazardous compressed air to cut, aluminum, Alloy Steel, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Max cut thickness: 1/2". Pilot arc technology allows you to cut without touching the tip to the metal. Setup within 1 min: the pre-installed npt 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor.
Please search "lotos pcs22" or "lotos pcs33"; not compatible with Lotos PCON40 or PCON90 Consumables Sets or any other third part consumables set.
Non-touch pilot arc plasma cutter: efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Better cutting quality and longer consumable life. The compatible consumables sets for this brown color ltp5000d plasma cutter are "pcs22" or "pcs33".
Automatic dual voltage / dual Frequency 110/220V 50/60Hz. Papst advanced cooling system: ensure the plasma cutter have a stable and durable high performance. Rated output Volts: 100 Safe and at low cost: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, copper, alloy steel, mild steel, and aluminum. Buy with confidence: we offer 30 days refund and 1-year, please submit registration form on our website.
|Manufacturer||Lotos Technology #ad|
|Warranty||1 Year Warranty|
5. PRIMEWELD #ad
CUT50DP, 1/2" Clean Cut, PrimeWeld 50A Air Inverter Plasma Cutter with Non-Touch Pilot Arc, Automatic Dual-Voltage 110V/220V and Dual-Frequency 50Hz/60Hz Portable Plasma Cutter #adPRIMEWELD #ad
- Compact and portable: this compact plasma cutter has a built-in handle for easy portability around your workshop or jobsite. Many useful features: this 50-amp plasma cutter has an operating air pressure of 75 PSI at 5 CFM. Plasma cutting equipment: this versatile plasma cutting machine uses non-hazardous compressed air to cut metals.
This plasma cutter kit includes a plasma torch, ground clamp with cable, air regulator, air hose and air hose connections. Pilot arc: includes integrated matrix with pilot arc function to efficiently cut through rough, painted and rusty metal with less slag.
When you contact us, you speak with real technical specialists and representatives, and our USA-based parts and customer service is available 7 days a week.
It also includes a papst advanced german cooling system and a MOSFET transistor, allowing you to cut thin metals or thicker metals. In addition, the dual-voltage capability allows you to run directly on 220V 50/60Hz power, or on 110V 50Hz/60Hz. Great customer service: backed by a 3-year warranty, we're committed to after-sales service. Cutting thickness is 1/2" for Clean Cut and 3/4" for Severance Cut. Great for stainless steel, copper, carbon steel, aluminum and more.
6. SUNGOLDPOWER #ad
Plasma Cutter Pilot Arc CUT50 Dual Voltage 110V 220V 50A Cutting Non Touch Machine Portable Plasma Cutter CUT50L #adSUNGOLDPOWER #ad
- 4. 2. Input and output: dual voltage capability allows the machine to run directly on 110V/220V. Setup easily: the air regulator and water trap is a combined unit mounted at the back machine, the whole machine can be setup very quickly, and it is to reduce the chance of water entering the plasma torch.
It provides a better cutting quality and longer consumable life.
3. Non-touch pilot arc: it efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag；the technology allows you to cut without touching the tip to the metal.
Can be widely used at demanding industrial and construction work, mild steel, alloy steel, copper, or home and hobby us.1. Plug adapters included, non-hf blowback start, 10-50 A output, 1/2” ideal clean cut and 3/4” maximum severance, there is no HF interference. Wide applications: suitable for cutting stainless steel, carbon steel and aluminum, and other metals.
7. Reboot #ad
Reboot Plasma Cutter Non Touch 50 Amp CUT50DL 1/2" Clean Cut Air Plasma Pilot Arc 110/220V High Frequency Inverter Machine 3/5'' Max Cutting for Copper Alloy Mild Steel Aluminum #adReboot #ad
- Cutting thickness 20-50a dc output: 1/2” ideal clean cut and 3/4” severance cut under 220/240V. Air pressure 60-70psi. Wildely application and low cost available for cutting most metals: stainless steel, carbon steel; widely used for automotive, aluminum, mild steel, metal processing, ducting work, repair/maintenance, alloy, manufacture.
Warranty buy this plasma cutter with confidence as Reboot offers 3-year limited warranty and free consumables guarantee, besides, you will get a local supports for any assistance.
20-35a dc output: 1/3" ideal clean cut and 2/5" severance cut under 110/120V, air pressure 60PSI recommendation.
Generator supported this rbc-5000dl plasma cutter works well with a generator, but we suggest a 5000W above generator. Pilot arc cutting without touching the metal, can efficiently cuts through rough/painted/rusty metals, and produces minimal slag. Better cutting quality and longer consumable life30A breaker suggested for 220V, 50A breaker suggested for 110V.
8. Biltek #ad
Biltek 50Amp Non-Pilot Arc Plasma Cutter, 1/2 Inch Cut, Dual Voltage 110V/220V with Pre-Attached 110V US Plug + 220V L6-30P Plug, Blue #adBiltek #ad
- Plasma cutter 50amp dc inverter dual voltage 110v/220V with Attached 110V US Plug + 220V Plug. Input voltage: 110-220v, 1-ph, 50/60Hz Dual Voltage. Cut up to 1/2" thick steel with the High Performance Cutting Torch.
High cutting performance Due to the Advanced Inverter Technology. Torch design provides a sure, Comfortable Grip Made from Heat and Impact Resistant Material.
9. Tosense #ad
CUT50P 50A Dual Voltage Plasma Cutting 110V/220V, Non-Touch Air Inverter Plasma Cutting Equipment, Digital Display Portable 1/2 Inch Clean Cut Machine, Pilot Arc Plasma Cutter Machine #adTosense #ad
- 13mm cutting thicknessideal cut thickness: 1/2" 13mm, automatic dual voltage / dual Frequency 110V/220V 50/60Hz. Voltage compensation to tackle with +/-15% electricity fluctuation. Igbt inverter plasma cutterigbt transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal.
Pilot arcpilot arc plasma cutter torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag；Pilot arc technology allows you to cut without touching the tip to the metal.
Outstanding cutting performancthe dc inverter cutting machine suitable for cut stainless steel, mild steel, and aluminum. Using air pressure adjusting equipment. Safety in operationwith protection of electric circuit against over current, over voltage and low-voltage.
Able to operate when the external air pressure is too high. The cutting current is continuously adjustable, direct and precise. Designed for both demanding industrial and construction work, alloy steel, copper, or home and hobby use. Our plasma cutter plc55p is IGBT technogy, not MOSFET. Igbt machine is far superior and more stable than the MOSFET machine. Better cutting quality and longer consumable life.
10. AmicoPower #ad
110/220V Dual Voltage Professional Cutting Machine, Amico APC-70HF, 70 Amp Non-touch Pilot Arc Plasma Cutter #adAmicoPower #ad
- Very easily cutting surface is rough, the serious rust, finish the work faster. Incorporates advanced non-touch pilot arc cutting technology, and better cutting quality, with oil and spray paint of metal materials, with an excellent Arc stability.
Can cut up to 1. 0 in. It requires less work to produce an overall better result with a cleaner cut. Automatic compensation for voltage fluctuation, over-current protection, over-voltage protection, under-voltage protection, over-load protection, automatic temperature control, and fan dormancy.
The filter is located inside the machine with an automatic air control solenoid valve. Stainless steel, alloy steel, low carbon steel, notches, holes, copper, angles, cast iron, aluminum alloy, slots, iron, v-grooves, curves, resulting in straight cuts, circles, aluminum and other conductive metals, pig iron, and many others in minutes.
Quick setup: npt 1/4" industry type d coupler can connect easily with the pre-installed plug on the air compressor. 115-volt & 230-volt dual voltage, and is designed for both demanding industrial work, almost all of the voltage and frequency can be used, 50/60Hz, construction.
|Manufacturer||Amico Power #ad|