As an Amazon Associate I earn from qualifying purchases.
Peachtree Woodworking Supply #ad - On the rubber end fittings and hose are approximate sizes and may slightly vary. The small thread-on rubber fitting has a 1 inch I. D. The large thread-on rubber fitting has a 1-1/2 inch i. D. The i.
D. The smaller diameter 1-3/16" o. D. This gives you the ability to plug into different tools to add dust collection at a moments notice. The hose and its specialized fittings work with multiple power tools, workshop vacuums, jigs and other tools around your woodworking shop or work shop.
With a 1-13/16 inch o. D. The plug-in adaptor conveniently threads onto the power tool hose so it will never slip off! Included inside the box: 1 each ten foot long 1-3/16 inch o. D. The adaptor is designed to plug into most standard workshop vacuum ports. And o. D. Outside diameter flexible dust collection power tool hose moves freely when connected to your power tools and vacuum.
Fulton Woodworking Tools #ad - The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose. Typically, pvc hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem.
Its also sturdy enough that it won’t flatten out when the dust collector is turned on. While pvc hose can be used on other machinery or devices it has been designed for dust collection purposes. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred.
Pvc hose depending on diameter can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The hose temperature range is -20° F to 165° F which is ideal for indoor use like in a woodworking or workshop environment. This pvc hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Pvc hose can be used as a primary line or can be plugged into and out of machinery as needed.
Cen-Tec Systems #ad - The cen-tec proprietary shop vac connection is designed to maximize the opening from the hose into the vacuum to prevent clogs and improve airflow delivering the maximum performance from your vacuum. Full attachment kit includes dust, upholstery tools, a caddy carry bag, crevice, and a 1-1/4" swivel adapter to fit into standard vacuum tools.
Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting. A collar with clip ring, 1”, 1-1/4”, and bayonet fittings with ¾”, 1-½” soft TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design.
Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. Also includes full 12" horsehair hard floor brush made in the USA. 1-1/4" diameter x 10-foot commercial grade vacuum hose to connect from all major brands of home shop vacuums to a wide range of power tools with ¾”, 1-1/4”, 1”, 1-½” internal and external connections for dust collection. Designed to fit most major brands of power tools and work shrouds including Skill Bosch, Makita, Ryobi, Dewalt, Festool. Fein, porter cable, Cobalt, Hitachi and Milwaukee Electric.
palart #ad - Bulk packed. Recolección de polvo con herramientas para aplicaciones de concreto, paneles de yeso o carpintería. Dwv9190 hose adaptor. Compatible with the Following: DWV9000 Se adapta al conector universal dWV9000 para una conexión rápida y fácil al puerto de polvo de la herramienta.
NXPOXS #ad - Fits for dewalt dust extractors dwv9110 dwv9120 dwv9130 dwv9140 dwv9150 dwV9160 DWV9170 DWV9180 . Universal connector allows for quick, easy and durable connection between 1 1/4" vacuum hose.
Fulton Woodworking Tools #ad - The hose has a compression ratio of 3: 1. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Typically, pvc hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This pvc hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it.
Pvc hose depending on diameter can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go.
When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, flexible and sturdy enough, but it must be durable, piping or hose to use can be challenging. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. It must also perform under the constant use and abuse of an everyday workshop environment.
WORKSHOP Wet/Dry Vacs #ad - Wet dry vacuum hose fits most shop vacuums with the standard 2-1/2-inch inlet port opening. 2-1/2-inch diameter vacuum attachments allows for larger sized debris collection and maximum airflow. Locking tab allows the wet dry vac hose to easily detach for storage unlike some shop vacuum hoses.
2-1/2-inch x 20-foot locking hose provides extended reach, and locking tab keeps hose connected to the wet dry vacuum cleaner during use. 2-1/2-inch x 20-foot locking hose provides extended reach, and locking tab keeps hose connected to the wet dry vacuum cleaner during use.
Using the included adapters this wet dry vacuum hose fits most shop vacuums with the standard 2-1/2-inch inlet port opening including WORKSHOP wet/dry vacuums. Using the included adapters this wet dry vacuum hose fits most shop vacuums with the standard 2-1/2-inch inlet port opening including WORKSHOP wet/dry vacuums. 2-1/2-inch diameter vacuum attachments allows for larger sized debris collection and maximum airflow.
Peachtree Woodworking #ad - Hose is clear so you can see directly inside to spot any kind of obstruction. Hose is made in USA. This heavy duty hose will not collapse under pressure from your dust collector.
Mountain Trades #ad - Wet/dry vacuum universal tool adapter attachment - made out of rubber this vacuum adapter can be cut to fit various sizes. Small dust collection system and with your wet dry vacuum hose. These 2 adapters can be used if you need a universal vac attachment, a vacuum adapter for dust collection, shopvac hose adapter or if you need a power tool vacuum attachment.
With this combo you have one shop vac hose adapter that is universal in that it can easily be cut to size and another that you can use with your dry or wet vac attachments.
Use the shop vac attachment to connect more accessories to your dust collection system. This will loosen the rubber and allow it to fit snug. See photos for detailed measurements. If it doesn't fit apply some heat by running it under hot water. Connect it to your wet dry shop vac accessories. 2 1/2 in. Fits most wet dry vac attachments but check photo for dimensions. The shop vac adapter is 2 1/2 to 1 1/4 inches.
WORKSHOP Wet/Dry Vacs #ad - Locking tab allows the wet dry vac hose to easily detach for storage unlike some shop vacuum hoses. This shop vacuum hose enables use of a 1-7/8-inch and 2-1/2-inch wet dry vacuum accessories and attachments.
1-7/8-inch diameter vacuum accessories are designed for a great blend of maneuverability and airflow. This wet dry vacuum hose is more flexible than a standard vac hose.
1. Peachtree Woodworking Supply
#ad10 Foot Long Dust Collection Power Tool Hose Kit with 6 Threaded Fittings/Attachments for Multiple Types/Brands of Power Tools and Work Shop Vacuums
#adD. The smaller diameter 1-3/16" o. D. This gives you the ability to plug into different tools to add dust collection at a moments notice. The hose and its specialized fittings work with multiple power tools, workshop vacuums, jigs and other tools around your woodworking shop or work shop.
More information #ad
And o. D. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage. With a 1-13/16 inch o. D. The plug-in adaptor conveniently threads onto the power tool hose so it will never slip off! Included inside the box: 1 each ten foot long 1-3/16 inch o. D. The adaptor is designed to plug into most standard workshop vacuum ports. And o. D. Outside diameter flexible dust collection power tool hose moves freely when connected to your power tools and vacuum.
| Brand | Peachtree Woodworking Supply #ad |
| Manufacturer | Fulton #ad |
| Part Number | 384 |
| Model | 384 |
More information #ad
2. Fulton Woodworking Tools
#ad4" x 20’ Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!
#adIts also sturdy enough that it won’t flatten out when the dust collector is turned on. While pvc hose can be used on other machinery or devices it has been designed for dust collection purposes. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred.
More information #ad
The pvc hose flexes enough to weave in and out of shop machinery or table legs without kinking. When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, flexible and sturdy enough, but it must be durable, piping or hose to use can be challenging. Pvc hose depending on diameter can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The hose temperature range is -20° F to 165° F which is ideal for indoor use like in a woodworking or workshop environment. This pvc hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Pvc hose can be used as a primary line or can be plugged into and out of machinery as needed.
| Brand | Fulton Woodworking Tools #ad |
| Manufacturer | Peachtree Woodworking Supply Inc #ad |
| Height | 4 Inches |
| Length | 20 Inches |
| Width | 4 Inches |
| Part Number | 376 |
| Model | 376 |
More information #ad
3. Cen-Tec Systems
#adBlack, Cen-Tec Systems 95259 10 Ft. Home and Shop Vacuum Hose with Expanded Multi-Brand Power Tool Dust Collection Adapter Set and Full Attachment Kit
#adAirflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting. A collar with clip ring, 1”, 1-1/4”, and bayonet fittings with ¾”, 1-½” soft TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design.
More information #ad
To change from the standard vacuum attachments into the power tool dust collection adapters, simply thread off the swivel adapter and thread on the extra-durable acetal clip ring, which then snaps into the corresponding adapter. Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. Also includes full 12" horsehair hard floor brush made in the USA. 1-1/4" diameter x 10-foot commercial grade vacuum hose to connect from all major brands of home shop vacuums to a wide range of power tools with ¾”, 1-1/4”, 1”, 1-½” internal and external connections for dust collection. Designed to fit most major brands of power tools and work shrouds including Skill Bosch, Makita, Ryobi, Dewalt, Festool. Fein, porter cable, Cobalt, Hitachi and Milwaukee Electric.
| Brand | Cen-Tec Systems #ad |
| Manufacturer | Cen-Tec Systems #ad |
| Weight | 4.69 Pounds |
| Part Number | 95259 |
| Model | 95259 |
More information #ad
4. palart
#adFits Dewalt Dust Collector Attachment,Fits with DWV9000 universal connector for quick and easy connection to tool dust port,Vacuum Hose, DWV9190 Hose Adapter Replacement
#adMore information #ad
Número de pieza: DWV9190 Se conecta a una manguera de 2 1/2 "57, 2 mm.| Brand | palart #ad |
| Manufacturer | palart #ad |
More information #ad
5. NXPOXS
#adNXPOXS DWV9000 Multi-function Connector Fit for Dewalt Dust Extractors DWV9110 DWV9120 DWV9130 DWV9140 DWV9150 DWV9160 DWV9170 DWV9180 1pack
#adMore information #ad
Positive lock maintains connection to dust port dwv9110 dwv9120 dwv9130 dWV9140 DWV9150 DWV9160 DWV9170 DWV9180 Small end: id = 1. 7 in od = 1. 875 in large end: ID = 1. 685 in. Package include: 1 pc DWV9000 Universal Connector.| Brand | NXPOXS #ad |
| Manufacturer | NXPOXS #ad |
| Part Number | NXPODV901 |
More information #ad
6. Fulton Woodworking Tools
#ad4" x 50’ Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!
#adPvc hose depending on diameter can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go.
More information #ad
Pvc hose can be used as a primary line or can be plugged into and out of machinery as needed. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses. This pvc hose checks all of those boxes and more! Dust collection hoses need to be not only long enough, so it won’t completely collapse in use. When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, flexible and sturdy enough, but it must be durable, piping or hose to use can be challenging. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. It must also perform under the constant use and abuse of an everyday workshop environment.
| Brand | Fulton Woodworking Tools #ad |
| Manufacturer | Peachtree Woodworking Supply Inc #ad |
| Height | 10 Inches |
| Length | 24 Inches |
| Width | 20 Inches |
| Part Number | 377 |
| Model | 377 |
More information #ad
7. WORKSHOP Wet/Dry Vacs
#adBlack, WORKSHOP Wet/Dry Vacs Vacuum Accessories WS25022A Extra Long Wet/Dry Vacuum Hose, 2-1/2-Inch x 20-Feet Locking Wet/Dry Vac Hose for Wet/Dry Shop Vacuums
#ad2-1/2-inch x 20-foot locking hose provides extended reach, and locking tab keeps hose connected to the wet dry vacuum cleaner during use. 2-1/2-inch x 20-foot locking hose provides extended reach, and locking tab keeps hose connected to the wet dry vacuum cleaner during use.
More information #ad
Locking tab allows the wet dry vac hose to easily detach for storage unlike some shop vacuum hoses. Wet dry vacuum hose fits most shop vacuums with the standard 2-1/2-inch inlet port opening. Using the included adapters this wet dry vacuum hose fits most shop vacuums with the standard 2-1/2-inch inlet port opening including WORKSHOP wet/dry vacuums. Using the included adapters this wet dry vacuum hose fits most shop vacuums with the standard 2-1/2-inch inlet port opening including WORKSHOP wet/dry vacuums. 2-1/2-inch diameter vacuum attachments allows for larger sized debris collection and maximum airflow.
| Brand | WORKSHOP Wet/Dry Vacs #ad |
| Manufacturer | Emerson Tool Company #ad |
| Height | 10 Inches |
| Length | 20 Inches |
| Weight | 5 Pounds |
| Width | 20.5 Inches |
| Part Number | WS25022A |
| Model | WS25022A |
| Warranty | No Warranty |
More information #ad
8. Peachtree Woodworking
#ad4" x 10' CLEAR PVC DUST COLLECTION HOSE BY PEACHTREE WOODWORKING PW375
#adMore information #ad
The pvc hose is wrapped around a steel wire that can easily be grounded. Tight bending radius allows you to maneuver the hose anywhere in your shop.| Brand | Peachtree Woodworking #ad |
| Manufacturer | ECTY #ad |
| Height | 5 Inches |
| Length | 16 Inches |
| Width | 16 Inches |
| Part Number | 375 |
| Model | 375 |
More information #ad
9. Mountain Trades
#adUniversal Shop Vac Attachment and Vacuum Hose Adapter With Universal Vac Attachment / Wet Dry Vac Attachments For Your Work Shop. Use Your Wet Dry Shop Vac Accessories With More Attachments
#adWith this combo you have one shop vac hose adapter that is universal in that it can easily be cut to size and another that you can use with your dry or wet vac attachments.
More information #ad
Vacuum adapters for the everyday craftsman - included are 2 different vac adapters that can be used for dust collection fittings, woodworking dust collection, vacuum hose adapters. Use the shop vac attachment to connect more accessories to your dust collection system. This will loosen the rubber and allow it to fit snug. See photos for detailed measurements. If it doesn't fit apply some heat by running it under hot water. Connect it to your wet dry shop vac accessories. 2 1/2 in. Fits most wet dry vac attachments but check photo for dimensions. The shop vac adapter is 2 1/2 to 1 1/4 inches.
| Brand | Mountain Trades #ad |
| Manufacturer | Mountain Trades #ad |
| Part Number | cutoff_shop |
More information #ad
10. WORKSHOP Wet/Dry Vacs
#ad1-7/8-Inch x 10-Feet Heavy Duty Contractor Wet/Dry Vac Hose for Wet/Dry Shop Vacuums, WORKSHOP Wet/Dry Vacs Vacuum Accessories WS17823A Wet/Dry Vacuum Hose
#ad1-7/8-inch diameter vacuum accessories are designed for a great blend of maneuverability and airflow. This wet dry vacuum hose is more flexible than a standard vac hose.
More information #ad
Most shop vacuum hoses are somewhat rigid and crimp easily, but the WORKSHOP wet/dry vac Contractor Grade hose is more flexible and rotates at the collar to make use of the shop vac hose user friendly. The workshop wet/dry vac contractor-Grade hose is four times more durable than the standard wet dry vacuum hose.| Brand | WORKSHOP Wet/Dry Vacs #ad |
| Manufacturer | Emerson Tool Company #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 3.5 Pounds |
| Width | 0 Inches |
| Part Number | WS17823A |
| Model | WS17823A |
| Warranty | No Warranty |
More information #ad
