As an Amazon Associate I earn from qualifying purchases.
Carpenter chisels up to 1-1/4" wide can be sharpened using the wolverine's vee-arm. Producing razor sharp tools and finely finished bevels has moved from an art into a science. The quad setting jig is designed to be used with 8” bench grinders. The wolverine grinding jig comes with a 3 x 5 inch adjustable platform which allows even large scrapers to be ground with ease.
Owning the wolverine Grinding Jig will ultimately save you time, frustration and money. The wolverine's vee arm can be used to sharpen skews, but a far superior method is ONEWAY's Skew Grinding Attachment not included. Three or four strokes on a strop will generate a razor sharp edge. Producing razor sharp tools and finely finished bevels has moved from an art into a science. Its called the “quad setting jig” since one jig sets the correct angles for all 4 of the other HSS woodturning lathe tools.



Not only will it correctly shape your tools, you will also be able to repeat the process to produce consistent results every time. The pro grind sharpening system includes a vast collection of unique setup tools, carving tools, parting tools, spindle gouges, wood turning scrapers, gouges, bowl gouges, jigs and accessories that most sharpening systems force you to purchase separately.
The multi-grind jig is designed to be used with the included Multi-Grind arm on the PRO GRIND Sharpening System and will accept tools up to 1. 125” in diameter. The pro grind tool rest bar attachment offers you the best possible way to achieve a precise edge to your bevels without taking of too much material off of your tool. The included and versatile multi-grind jig will correctly shape the edge on bowl gouges, side grinds aka ellsworth grind, liam o’Neil grind/Irish grind or fingernail grinds for spindle work and detailing.




Black coating surface: vari-grind attachment surface by spraying powder coating to the support surface with powder spraying equipment. The two additional holes can fix the appliance and increase the stability of operation. Wide application: the lathe tool sharpening jig is widely used, mainly for grinding machines, to fix metal or wood blocks that need to be polished.
V-arm measures 24" / 61 cm long and Platform measures 3" x 5" x 1/4" thick. Complete component: complete kit includes a 5-piece set: A fish board ruler, two knife grinding support bases, and two side supports. Powder spraying is superior to spray paint in mechanical strength, corrosion resistance, adhesion, and aging resistance. Precise dimensions to accommodate more machinable bars.


It is designed to be used with the wolverine grinding jig—the system for sharpening woodturning tools with a standard bench-style grinder. Protective washers: the vari-grind jig is equipped with scratches resistance equipment. By mounting one under each wheel, grinding operations can be rapidly performed on either side of your grinder without re-position bases.
Black coating surface: vari-grind attachment surface by spraying powder coating to the support surface with powder spraying equipment. The dimensions of the grinding jig are accurate. A plastic washer is added to the metal inside the support to fix the rod to avoid friction with the rod that needs to be processed and thus damage the machine and items. Powder spraying is superior to spray paint in mechanical strength, adhesion, corrosion resistance, and aging resistance.
1. Oneway
#ad
Oneway Wolverine Grinding Jig with Quad Setup Jig for Sharpening Workshop Tools • Woodturning Gouges • Chisels • Scrapers • Skews and Wood Carving Tools
#adOneway #ad - The included quad setup jig helps you correctly set the proper grinding angles for roughing gouges at 45 deg, parting tools at 30-60 deg, Skews at 21. 5-43 deg and bowl Scrapers at 8 deg. With a finely dressed 80 or 120 grit wheel, even very small carving tools can be superbly ground using the standard Vee-Arm.Carpenter chisels up to 1-1/4" wide can be sharpened using the wolverine's vee-arm. Producing razor sharp tools and finely finished bevels has moved from an art into a science. The quad setting jig is designed to be used with 8” bench grinders. The wolverine grinding jig comes with a 3 x 5 inch adjustable platform which allows even large scrapers to be ground with ease.
More information #ad
The oneway wolverine grinding jig is the core component of the Oneway Wolverine line of grinding products. The arm is adjusted to set the bevel, and the chisel can be ground with small sideways motions and light cutting pressure. Owning the wolverine Grinding Jig will ultimately save you time, frustration and money. The wolverine's vee arm can be used to sharpen skews, but a far superior method is ONEWAY's Skew Grinding Attachment not included. Three or four strokes on a strop will generate a razor sharp edge. Producing razor sharp tools and finely finished bevels has moved from an art into a science. Its called the “quad setting jig” since one jig sets the correct angles for all 4 of the other HSS woodturning lathe tools.
Brand | Oneway #ad |
Manufacturer | ONEWAY MANUFACTURING #ad |
Height | 3.25 Inches |
Length | 30.75 Inches |
Weight | 8.3 Pounds |
Width | 9 Inches |
Part Number | 2291 |
Model | 2291 |
More information #ad
2. Oneway
#ad
Wolverine Grinding System with VARI-GRIND jig and Setup Blocks
#adOneway #ad - Grinder and Turning Tools NOT included. Produce razor sharp tools and finely finished bevels. Includes: the wolverine sharpening system & the varI-GRIND jig and setup blocks! The wolverine system was designed to replace conventional light duty toolrests with heavy duty universal grinding and dressing jigs for low cost grinders.More information #ad
Comes with 2 set up blocks for setting the VARI-GRIND Jig witch saves time, frustration and money.Brand | Oneway #ad |
Manufacturer | Oneway Manufacturing #ad |
Weight | 10.01 Pounds |
Part Number | 7738 |
Model | 7738 |
More information #ad
3. Oneway
#ad
Wolverine Platform Assembly
#adOneway #ad - Kit for sharpening chisels and plane blades using an ordinary grinde. Features wolverine’s system of adjustment so distance from base to the stone is easily set. Increase the versatility of your grinder this is one of the best accessories you can own.More information #ad
Brand | Oneway #ad |
Manufacturer | Oneway Manufacturing #ad |
Height | 2.3 Inches |
Length | 10.6 Inches |
Width | 9.5 Inches |
Part Number | 2243 |
More information #ad
4. Peachtree Woodworking Supply
#ad
Slotted Platform and Tool Rest, Bowl Gouges, Chisels, Spindle Gouges and More. Includes the Multi-Grind Jig for Gouges, Gouges, Skews, Pro Grind Sharpening System For Lathe Turning Tools
#adPeachtree Woodworking Supply #ad - From the built-in projection gauge on the multi-grind arm to the Magnetic Micro Bevel setup block you’ll be able to achieve consistent repeatable angles and produce excellent results each and every time you use the PRO GRIND Sharpening Jig system. After all, we need our tools to last a long time, so why would you want to take off to much at a time? The Tool Rest Bar is ideal for sharpening curved, even bevel edges that are typically used on spindle and roughing gouges.Not only will it correctly shape your tools, you will also be able to repeat the process to produce consistent results every time. The pro grind sharpening system includes a vast collection of unique setup tools, carving tools, parting tools, spindle gouges, wood turning scrapers, gouges, bowl gouges, jigs and accessories that most sharpening systems force you to purchase separately.
More information #ad
The platform has a slot milled horizontally through it so it can accept the included tool holder. The large, 3” x 5” slotted platform is the ideal way to sharpen flat edged tools like wood turning skews, chisels and hand plane irons. The multi-grind jig is designed to be used with the included Multi-Grind arm on the PRO GRIND Sharpening System and will accept tools up to 1. 125” in diameter. The pro grind tool rest bar attachment offers you the best possible way to achieve a precise edge to your bevels without taking of too much material off of your tool. The included and versatile multi-grind jig will correctly shape the edge on bowl gouges, side grinds aka ellsworth grind, liam o’Neil grind/Irish grind or fingernail grinds for spindle work and detailing.
Brand | Peachtree Woodworking Supply #ad |
Manufacturer | Savannah #ad |
Part Number | 7575 |
Model | 7575 |
More information #ad
5. Oneway
#ad
Wolverine Vari-Grind Attachment
#adOneway #ad - Create a side grind on your bowl gouges. Quick and easy to use. Black coating to protect from rusting. Designed to be used with the Wolverine Grinding Jig. Create a fingernail grind on your spindle gouges.More information #ad
Brand | Oneway #ad |
Manufacturer | ONEWAY #ad |
Height | 1.8 Inches |
Length | 11.6 Inches |
Weight | 1 Pounds |
Width | 5 Inches |
Part Number | 425376 |
Model | 2480 |
More information #ad
6. Oneway
#ad
Wolverine Skew Grind Attachment
#adOneway #ad - Makes sharpening Skew Tools a Snap. Use with the Wolverine V arm. Save time, Money and Frustration. Designed to b e used with the Wolverine Jig. Durable metal construction.More information #ad
Brand | Oneway #ad |
Manufacturer | Oneway Manufacturing #ad |
Height | 2.25 Inches |
Length | 12.25 Inches |
Weight | 1.1 Pounds |
Width | 3 Inches |
Part Number | 2690 |
Model | 2690 |
More information #ad
7. Oneway
#ad
Wolverine Jig Base
#adOneway #ad - Features wolverine’s system of adjustment so distance from base to the stone is easily set. Kit for sharpening chisels and plane blades using an ordinary grinde. Increase the versatility of your grinder this is one of the best accessories you can own.More information #ad
Brand | Oneway #ad |
Manufacturer | Oneway Manufacturing #ad |
Height | 3 Inches |
Length | 8.75 Inches |
Weight | 1.5 Pounds |
Width | 3.3 Inches |
Part Number | 2795 |
More information #ad
8. VEVOR
#ad
3" x 5" x 1/4" Platform Grinding Jig with Vari-Grind, Fit 0.63" Bowl Gouge Vari-Grind Jig for the Wolverine Sharpening System(5pcs set, 24" Length of V-arm Vari-Grind Attachment, VEVOR Grinding Jig
#adVEVOR #ad - By mounting one under each wheel, grinding operations can be rapidly performed on either side of your grinder without re-position bases. It is designed to be used with the wolverine grinding jig—the system for sharpening woodturning tools with a standard bench-style grinder.Black coating surface: vari-grind attachment surface by spraying powder coating to the support surface with powder spraying equipment. The two additional holes can fix the appliance and increase the stability of operation. Wide application: the lathe tool sharpening jig is widely used, mainly for grinding machines, to fix metal or wood blocks that need to be polished.
More information #ad
Standard dimension: complete kit includes standard bases, v-arm, and platform. Added hole location: the vari-grind attachment adopts a thoughtful design, the platform added groove, which improves the compatibility of product and machine. V-arm measures 24" / 61 cm long and Platform measures 3" x 5" x 1/4" thick. Complete component: complete kit includes a 5-piece set: A fish board ruler, two knife grinding support bases, and two side supports. Powder spraying is superior to spray paint in mechanical strength, corrosion resistance, adhesion, and aging resistance. Precise dimensions to accommodate more machinable bars.
Brand | VEVOR #ad |
Manufacturer | VEVOR #ad |
Part Number | Grinding Jig |
More information #ad
9. Ron Brown's Best
#ad
Ron Brown's Best Universal Setting Jig Lathe tool Sharpening
#adRon Brown's Best #ad - Easily return you sharpening jig settings to recreate any grind you love. Quickly return to the grinding positions needed to maintain a favorite grind.More information #ad
Accurately set up your grinding system in seconds. Designed for use with the OneWay Wolverine Varigrind Fixture for bowl and spindle gouges. The engraved linear scale allows you to reproduce a wide variety of settings.Brand | Ron Brown's Best #ad |
Manufacturer | Ron Brown's Best #ad |
More information #ad
10. VEVOR
#ad
Fit for 0.63" Bowl Gouge Vari-Grind Jig for the Wolverine Sharpening System, 3" x 5" x 1/4" Platform Grinding Jig, VEVOR Vari-Grind System, 24" Length of V-arm Vari-Grind Attachment
#adVEVOR #ad - Suitable for the diameter of the gouges is 06" / 18 mm, the distance between the inlet and outlet holes is 2. 5" / 16 mm. Wide application: the lathe tool sharpening jig is widely used, mainly for grinding machines, to fix metal or wood blocks that need to be polished.It is designed to be used with the wolverine grinding jig—the system for sharpening woodturning tools with a standard bench-style grinder. Protective washers: the vari-grind jig is equipped with scratches resistance equipment. By mounting one under each wheel, grinding operations can be rapidly performed on either side of your grinder without re-position bases.
More information #ad
The diameter of the inlet and outlet holes is 07" / 64 mm. Complete component: 6-piece set: a fish board ruler, two side supports, two knife grinding support bases, and an angle working bracket. Black coating surface: vari-grind attachment surface by spraying powder coating to the support surface with powder spraying equipment. The dimensions of the grinding jig are accurate. A plastic washer is added to the metal inside the support to fix the rod to avoid friction with the rod that needs to be processed and thus damage the machine and items. Powder spraying is superior to spray paint in mechanical strength, adhesion, corrosion resistance, and aging resistance.
Brand | VEVOR #ad |
Manufacturer | VEVOR #ad |
Part Number | Vari-Grind System |
More information #ad