Top 10 Inner Tie Rod Tool – Tool Sets

As an Amazon Associate I earn from qualifying purchases.

1. OEM TOOLS

#ad

OEMTOOLS 25296 Inner Tie Rod Tool

#ad
OEM TOOLS #ad - Used to easily Turn Tie Rods. Can also be used on all innter tie rods with 1-3/16 and 1-5/16 in Hex Sizes. Used to service inner Tie Rods on Rack and Pinion Steering Assemblies. Removes and installs inner Tie Rods on Many GM and Some Chrysler Products.
BrandOEM TOOLS #ad
ManufacturerGreat Neck Saw #ad
Height0.8 Inches
Length6.9 Inches
Weight0.75 Pounds
Width5 Inches
Part Number25296
Model25296
WarrantyOEMTOOLS Limited Lifetime

2. mainpoint

#ad

Mainpoint Universal Inner Tie Rod Hex Wrench Removal Tools 27-42mm

#ad
mainpoint #ad - Suitable for tie rods between 27mm and 42mm in diameter. Specially designed to be used with 1/2" square drive tools. Universal fits for all vehicles including Mercedes, Ford, Benz, BMW, Honda, Nissan, Toyota, etc. Designed for the removal of the direction of the steering rod. Easily removes inner tie rod ends without disassembling rack and pinion.
Brandmainpoint #ad
ManufacturerMainpoint Tools #ad
Height2.36 Inches
Length3.54 Inches
Weight0.85 Pounds
Width2 Inches
Part Number1680146

3. 8MILELAKE

#ad

42mm Tie Rod End Removal Tool, 8MILELAKE Universal Inner Tie Rod Hex Wrench 27mm

#ad
8MILELAKE #ad - The master tie rod tools easily replace inner tie rod ends. Special design to be used with 1/2" Square drive tools. 27-42mm diameter without removing the rack and pinion. Designed specifically for the removal of the direction of the steering rod. Applicable to various vehicles: compatible for Mercedes Benz, BMW, Ford, Honda, Nissan, etc .
Brand8MILELAKE #ad
Manufacturerfreebirdtrading #ad
Height1.97 Inches
Length5.91 Inches
Width3.94 Inches
Part NumberSZ
ModelTie Rod Wrench

4. GearWrench

#ad

3680D, GEARWRENCH 15 Pc. Ratcheting Serpentine Belt Tool Set

#ad
GearWrench #ad - Complete tool set for removing or installing the serpentine belt on vehicles with a spring loaded belt tensioner pulley. Includes 6 point sockets: 13 millimeter, 15 millimeter, 17 millimeter, 14 millimeter, 16 millimeter, 18 millimeter and 19 millimeter.

Combining the innovation of a gearWRENCH ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination. Long bar can hold sockets directly or attach to the ratcheting wrench for maximum access. Includes crowsfoot: 13mm, 14mm and 15mm. Includes drive tools: long bar, and 3/8", special gearWrench Ratcheting Wrench, 1/2" and 3/4" Adapters.
BrandGearWrench #ad
ManufacturerGearWrench #ad
Height2.5 Inches
Length15.55 Inches
Weight1.35 Pounds
Width5.05 Inches
Part Number3680D
Model3680D
WarrantyStandard Limited Lifetime

5. CTA Tools

#ad

CTA Tools 4014 Inner Tie Rod Tool

#ad
CTA Tools #ad - Will service tie rods with flats and smooth tie rods. Removes inner tie rods without removing outer tie rods. Slide tool over end and tighten collar to allow access with a 3/8-Inch drive extension.
BrandCTA Tools #ad
ManufacturerCTA Tools #ad
Height1 Inches
Length7.5 Inches
Weight0.6 Pounds
Width4.2 Inches
Part Number4014
Model4014

6. Crescent

#ad

CX6PT20, Crescent 20 Pc. 3/8" Drive Pass-Thru X6 Standard Spline Mechanics Tool Set

#ad
Crescent #ad - Pass-thru socket and ratchet system eliminates the need for deep sockets. Included adapter converts X6 box end for traditional square drive sockets.

Pass-thru system works over any length threaded rod where normal ratchets and sockets won't fit. Laser-etched sizing makes identifying the correct tool quick and easy. Fits 6 fastener types hex Square 12 pt E-Torx Rounded Hex and Spline. Wipes clean of oil and dirt easily. Up to 50% thinner than standard ratchets to give you greater access. Up to 40% stronger than standard ratchets. 5° ratcheting swing arc provides turns restricted fasteners.
BrandCrescent #ad
ManufacturerCooper Tools #ad
Height1.97 Inches
Length12.64 Inches
Weight1.5 Pounds
Width6.57 Inches
Part NumberCX6PT20
ModelCX6PT20
WarrantyStandard Limited Lifetime

7. GEARWRENCH

#ad

3312D, GEARWRENCH Deluxe Inner Tie Rod Tool

#ad
GEARWRENCH #ad - Allows for use on all inner tie rods with 1-3/16" and 1-5/16" hex sizes. The inner tie rod can be removed and installed without removing the rack.
BrandGEARWRENCH #ad
ManufacturerKD Tools #ad
Height5.49 Inches
Length1.7 Inches
Weight1.35 Pounds
Width3.65 Inches
Part Number3312D
Model3312D

8. CTA Tools

#ad

CTA Tools 4012 Inner Tie Rod Tool Kit

#ad
CTA Tools #ad - Metric insert sizes include: 14mm, 17mm and 33. 6mm. Extra-long 20-inch 51 cm socket with 7 crows-foot inserts. Use with 1/2-Inch drive tools. Standard insert sizes include: 1-13/16-inch, 1-5/16-Inch, 1-1/4-Inch, and 1-7/16-Inch. Perfect tool for the removal and installation of inner tie rods without removing the rack.
BrandCTA Tools #ad
ManufacturerCTA Tools #ad
Height3 Inches
Length29 Inches
Weight6.95 Pounds
Width6.25 Inches
Part Number4012
Model4012
Warrantylifetime warranty

9. OTC

#ad

OTC 7484 Inner Tie Rod Hex Wrench

#ad
OTC #ad - Universal wrench will fit on all styles and allow the technician to unscrew the tie rod link for replacement. Unique lever design will turn hex rack ends or hex shafts from 1 inch to 1-5/8 inch 25-41 millimeters.
BrandOTC #ad
ManufacturerOTC #ad
Height2.3 Inches
Length4.5 Inches
Weight0 Pounds
Width4.8 Inches
Part Number7484
Model7484
WarrantyOne year limited warranty