As an Amazon Associate I earn from qualifying purchases.


Must have tools for constructing train tables, can work smoothly without burr, entrance kitchenware, workbenches, bookcases and dressing tables. Allows you to easily hide screws/fasteners.
Multipurpose:the mini pocket fixture is very suitable for diy household projects or professional and general commercial purposes. Kit:pocket hole jig comes with pocket hole jig, 3 sizes stoppers 6/8/10mm, 3 sizes drill 6/8/10mm, 3 sizes sleeves6/8/10mm. Work with a f clamp or c clamp not Included and drill bits to create accurate woodworking holes to create or repair wood joints.

Multiple gradations: gradations included for marking Common, Valley, Hip, And Jack Rafters; Useful For Determining And Marking Angles And Making Square Cuts On Boards.

The bending strength of 12" crowbar is greater than 1200 inch pounds. The angled edge is fit for pulling apart walls, wood panels and removing moldings, nails & trim, prying off decorative strips, tiles, and more.
High hardness: crowbar is forged from high-quality carbon steel, with high hardness & durability. It can be very useful when you’re recycling used pallets or other salvaged wood. Convenience: crowbar complies with relevant environmental protection requirements and can be used with confidence. Hexagonal shaft has six sides for better grip and is great for levering. Application: polished pry bar end can be wedged into narrow spaces.

Universal adaptor: you can use accessories from other multi tools with the universal adaptor that screws onto the head.
On board fuel gauge: Displays Remaining Run Time. Run time: red lithium battery offer extended run time. Application versatility: cuts, grinds, sands and scrapes. Grouting: the multi-purpose head can slice into tight spaces to clear grout or trim. It tell you how much battery you have left in 25% increments. Includes: 2426 m12 multi-tool- bare tool only, Sanding Pad, Wood Cutting Blade, Adapter, 5 Assorted Sanding Sheets.

The massca features a hardened drill guide to supply a long life, along with a clamping magnet for use with steel clamps. It features an inbuilt workpiece thickness gauge, inbuilt drill depth setting gauge and inbuilt setup gauge for rapid checking of dimensions, fast operation and quick drilling of joints.
Quality design. Accurate results. Use d for creating those perfect woodworking holes or to repair wood joints, the Pocket Joint involves cutting a slot and accurately pre- drilling a pilot hole at an angle between two boards before connecting the two with a screw. Complete set. Thanks to its unique, magnetic quick- adjust base system, the design of the Massca Pocket Hole Jig provides rapid and simple operation to make it one of the fastest and easiest jigs available.



The professional feiyang miter spring Clamps provides you with the ideal and cost effective mitered corners clamping tool to help you get your project get done in a more efficient manner.
If you are a woodworking enthusiasts, contractors, carpenters or craft hobbyists, you will love this tool. You can use the miter spring pliers to easily open the sharp tip, then release the clamp so the tips pierce into the wood to hold the parts together. When you making picture frames, wood trim work, moldings, the biggest trouble in gluing up mitered corners is keeping them from opening up. Now, and any compound miter, it is time to give up those cumbersome and expensive parallel clamps.
1. Skil
#ad
SKIL 15 Amp 7-1/4 Inch Circular Saw with Single Beam Laser Guide, 5280-01
#adSkil #ad - Safety lock/guarded trigger and power-on indicator minimize accidental starts. Spindle lock for easy blade changes. Powerful 15-amp motor delivers 5 300-RPM for greater speed and faster cuts.More information #ad
7-1 4-inch carbide-tipped blade included. 51° bevel capacity with a positive stop at 45° for a wide variety of cuts. Dust blower keeps line-of-cut free of sawdust for improved visibility.Brand | Skil #ad |
Manufacturer | SKIL #ad |
Height | 8.5 Inches |
Length | 14.2 Inches |
Weight | 8.7 Pounds |
Width | 9.8 Inches |
Part Number | 5280-01 |
Model | 5280-01 |
More information #ad
2. WEN
#ad
WEN 61721 18-Gauge 3/8-Inch to 2-Inch Pneumatic Brad Nailer
#adWEN #ad - Hassle-free nose latch makes clearing jammed nails quick and easy. Shoot 18-gauge brads ranging from 3/8 to 2 inches in length. Note: nails and case not included.More information #ad
Features a depth adjustment wheel, a nail gauge, a rotatable exhaust, and a quick release 106-nail capacity magazine. Operate at 60 to 115 psi with the 1/4-inch NPT air inlet fitting. Pneumatic nailer, need air compressor to drive.Brand | WEN #ad |
Manufacturer | WEN #ad |
Height | 2.75 Inches |
Length | 10 Inches |
Weight | 2.7 Pounds |
Width | 8.25 Inches |
Part Number | 61721 |
Model | 61721 |
More information #ad
3. T&A
#ad
Wood Woodwork Guides Joint Angle Tool Carpentry Locator, 14Pcs Pocket Hole Jig 15Degree Woodworking Inclined Hole Fixture 6/8/10mm Drill Bits Dowel Screw Drill Jig Joinery Kit Carpenters
#adT&A #ad - Convenient to use:drill inclined holes quickly and easily to hide screws in wooden furniture. Sharp knife head with perfect performance, helps to improve work efficiency. Double pocket: dual pocket 15°drill angle, can realize precise screw connection, 2-way hole, and embed screws to realize invisibility.Must have tools for constructing train tables, can work smoothly without burr, entrance kitchenware, workbenches, bookcases and dressing tables. Allows you to easily hide screws/fasteners.
More information #ad
3 sizes drill bits:easily convert between pairs of 6/8/10mm drill drive adapters to adapt to any wood type, position and angle. It fits well with plugs and sleeves of corresponding sizes. Minimum size-can hold one hand, DIY woodworking tools and 2-way inclined holes for precise screw connection. Multipurpose:the mini pocket fixture is very suitable for diy household projects or professional and general commercial purposes. Kit:pocket hole jig comes with pocket hole jig, 3 sizes stoppers 6/8/10mm, 3 sizes drill 6/8/10mm, 3 sizes sleeves6/8/10mm. Work with a f clamp or c clamp not Included and drill bits to create accurate woodworking holes to create or repair wood joints.
Brand | T&A #ad |
Manufacturer | T&A #ad |
Part Number | SHQT-1 |
More information #ad
4. Swanson Tool Co., Inc
#ad
Blue, SWANSON Tool Co S0101 7 Inch Speed Square
#adSwanson Tool Co., Inc #ad - Features: pocket-sized swanson blue book, A Comprehensive Guide To Help Workers Make Correct Angle Cuts For Any Pitched Roof. Easy to use: 1/4-in spaced scribing notches and the diamond Cutout For Easy Rafter Seat Cuts And Scribing The Most Common And Popular Stud Widths.Multiple gradations: gradations included for marking Common, Valley, Hip, And Jack Rafters; Useful For Determining And Marking Angles And Making Square Cuts On Boards.
More information #ad
Includes: features common to 5 different tools try square, line scriber, Miter Square, Saw Guide, And Protractor Making The Speed Square Something That Belongs On Every Tradesman'S Tool Bench.Brand | Swanson Tool Co., Inc #ad |
Manufacturer | Swanson Tool #ad |
Height | 8 Inches |
Length | 1 Inches |
Weight | 0.5 Pounds |
Width | 8 Inches |
Part Number | S0101 |
Model | S0101 |
Warranty | As Labeled |
More information #ad
5. WORKPRO
#ad
12” Pry Bar, Prying Apart Baseboard, for Kitchen Remodel, Claw Bar, Multi-sided Forged Steel Made, Cats Paw Nail Remover, WORKPRO 2-Piece Nail Puller Set, 8” Mini Crowbar
#adWORKPRO #ad - 8" crowbar weighs 180 grams, and 12" crowbar weighs 420 grams. Rust-proof design: surface of pry bar is coated with anti-rust oil, which can effectively avoid surface rust and have a longer service life. Versatile construction: the design of l-shaped crowbar helps increase torque, and with the help of leverage, it is convenient to use.The bending strength of 12" crowbar is greater than 1200 inch pounds. The angled edge is fit for pulling apart walls, wood panels and removing moldings, nails & trim, prying off decorative strips, tiles, and more.
More information #ad
The head of crowbar allows for striking as a hammer. It is recommended that you clean the surface and dry it after use, which will help to extend the service life of the crowbar. The bending strength of 8" crowbar is greater than 500 inch pounds. High hardness: crowbar is forged from high-quality carbon steel, with high hardness & durability. It can be very useful when you’re recycling used pallets or other salvaged wood. Convenience: crowbar complies with relevant environmental protection requirements and can be used with confidence. Hexagonal shaft has six sides for better grip and is great for levering. Application: polished pry bar end can be wedged into narrow spaces.
Brand | WORKPRO #ad |
Manufacturer | WORKPRO #ad |
Part Number | W002002AE |
More information #ad
6. Milwaukee
#ad
And Multi-Grit Sanding Papers Battery Not Included, Milwaukee 2426-20 M12 12 Volt Redlithium Ion 20,000 OPM Variable Speed Cordless Multi Tool with Multi-Use Blade, Power Tool Only, Sanding Pad
#adMilwaukee #ad - Compatible: m12 lithium-ion System with over 25 cordless tools. Fuel gauge: know how much time you have left on your job with the LED panel on the side of the unit. Voltage: 12v; variable speed: 12 settings; opm: 5, 000 - 20, 000; accessory adapter Included: Yes; On Board Fuel Gauge: Yes; Battery Sold Separately; No of Battery Included: 0 Sanding: an included sanding head with sanding pads will let you put the finishing touches on your woodworking projects without a separate purchase.Universal adaptor: you can use accessories from other multi tools with the universal adaptor that screws onto the head.
More information #ad
Durability: All Metal gear case. Variable speed Dial: Match speed to application. 12 speed settings: switch between 5, 000 and 20, 000 orbits per minute with the speed adjustment knob. On board fuel gauge: Displays Remaining Run Time. Run time: red lithium battery offer extended run time. Application versatility: cuts, grinds, sands and scrapes. Grouting: the multi-purpose head can slice into tight spaces to clear grout or trim. It tell you how much battery you have left in 25% increments. Includes: 2426 m12 multi-tool- bare tool only, Sanding Pad, Wood Cutting Blade, Adapter, 5 Assorted Sanding Sheets.
Brand | Milwaukee #ad |
Manufacturer | Milwaukee #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 2.05 Pounds |
Width | 0 Inches |
Part Number | 2426-20 |
Model | 2426-20 |
Warranty | 5 Years |
More information #ad
7. Massca
#ad
Hex Key & Stop Collar – For DIY Carpentry Projects, Massca Twin Pocket Hole Jig Set – Adjustable & Easy to Use Joinery Woodworking Tool w/Drill Bit
#adMassca #ad - Simple operation. Perfect for joinery woodworking diy carpentry projects, drill bit, this set comes compete with a jig, stop collar and hex key. Reliable construction. The pocket hole jig is designed for use with timber from ½"- 1½" in thickness 13mm- 38mm.The massca features a hardened drill guide to supply a long life, along with a clamping magnet for use with steel clamps. It features an inbuilt workpiece thickness gauge, inbuilt drill depth setting gauge and inbuilt setup gauge for rapid checking of dimensions, fast operation and quick drilling of joints.
More information #ad
As such, this twin pocket hole Jig is designed to allow the accurate drilling of side- by - side pocket holes. No marking out is required when using this jig. Quality design. Accurate results. Use d for creating those perfect woodworking holes or to repair wood joints, the Pocket Joint involves cutting a slot and accurately pre- drilling a pilot hole at an angle between two boards before connecting the two with a screw. Complete set. Thanks to its unique, magnetic quick- adjust base system, the design of the Massca Pocket Hole Jig provides rapid and simple operation to make it one of the fastest and easiest jigs available.
Brand | Massca #ad |
Manufacturer | Hopo International LLC #ad |
Height | 1 Inches |
Length | 5 Inches |
Width | 2 Inches |
More information #ad
8. HORUSDY
#ad
Plastic Racking, HORUSDY 44-Piece Magnetic Screwdriver Set with Go-Thru Steel Blades | High Torque
#adHORUSDY #ad - Cushion grip handle for comfort and control, With ergonomic TPR handle and button on it, it helps you to use very easily. 44-piece tool set includes: 17pc Magnetic Screwdriver, 10pc Assorted Bits, 16pc Hex Keys. Screwdrivers with go-thru steel blades for added strength, colour coded for easy identification,Durable plastic racking shelf for well organization.More information #ad
Magnetized black coated tip improve handling and manipulation of screws. Al tools made from hardened chrome vanadium steel, tempered for greater strength and durability.Brand | HORUSDY #ad |
Manufacturer | HORUSDY #ad |
Height | 5 Inches |
Length | 10.5 Inches |
Width | 12.5 Inches |
Part Number | 94268 |
More information #ad
9. Makita
#ad
Makita XMT03Z 18V LXT® Lithium-Ion Cordless Multi-Tool, Tool Only
#adMakita #ad - Includes adapters to fit most competitive accessories. Variable speed control dial 6, 000-20, 000 OPM enables user to match the speed to the application. Large on/off slide switch with lock-on button for operator convenience.More information #ad
Small diameter barrel grip only 2-3/8" for easy handling. 3. 2° oscillation angle engineered for faster, more aggressive cutting and sanding. Compatible with makita 18V Lithium-Ion batteries with a Star symbol battery sold separately.Brand | Makita #ad |
Manufacturer | Makita #ad |
Height | 4.9 Inches |
Length | 3.9 Inches |
Weight | 4 Pounds |
Width | 12.2 Inches |
Part Number | XMT03Z |
Model | XMT03Z |
Warranty | 3-Year Limited Warranty |
More information #ad
10. Feiyang
#ad
Feiyang 13 Miter Spring Clamps with Pliers for Woodworking,Wood Trim,Picture Frames and Moldings
#adFeiyang #ad - They will return to its original shape and strength every time. Great for any compound miter. It can be done in just a few seconds. Then, just place the spring clamp onto the mitered corner you need to secure, let the glue dry or brad nails the corner joints together. The miter clamps are designed with no gaps, and spread up to approximately 2 inches, can be applied for pocket-sized projects, so they will cover most trim sizes.The professional feiyang miter spring Clamps provides you with the ideal and cost effective mitered corners clamping tool to help you get your project get done in a more efficient manner.
More information #ad
Unlike other available spring clamps, or tearing on the wood, pushing, the uniquely designed tip is designed to pierce the wood, so that there is minimal visible evidence of the clamps being used after you remove them. Although they will leave small impressions in the wood, but they can be filled or sanded out in finishing. If you are a woodworking enthusiasts, contractors, carpenters or craft hobbyists, you will love this tool. You can use the miter spring pliers to easily open the sharp tip, then release the clamp so the tips pierce into the wood to hold the parts together. When you making picture frames, wood trim work, moldings, the biggest trouble in gluing up mitered corners is keeping them from opening up. Now, and any compound miter, it is time to give up those cumbersome and expensive parallel clamps.
Brand | Feiyang #ad |
Manufacturer | Feiyang #ad |
Height | 1.38 Inches |
Length | 7.68 Inches |
Weight | 0.88 Pounds |
Width | 3.54 Inches |
More information #ad