As an Amazon Associate I earn from qualifying purchases.
1. National Hardware #ad
National Hardware N109-040 V1390 Thumb Latch in Black #adNational Hardware #ad
- Equipped with easily operated locking feature. Designed to latch in or out swinging gates and doors up to 3 inches thick. Heavy duty construction provides for long, maintenance free operation.
1 pack. Can be used in either right or left hand applications. Includes decorative pull, and mounting fasteners.
|Brand||National Hardware #ad|
2. Nationwide Industries #ad
Keystone Black Zinc Diecast Metal Key Lockable Latch | 2-Sided | Keyed Alike | KLADV-M2-BK-KA #adNationwide Industries #ad
- Durable zinc diecast metal construction | The Keystone 2-sided latch will not rust or corrode | Superior self-latching technology | Engineered to prevent jamming and sticking. For use with vinyl, wood, or metal gates | Includes plastic marking template for installation | Locks and unlocks from either side | Can be used for left or right handed applications.
The keystone latch is keyed alike meaning if you purchase multiple they will use the same key | The Keystone Latch can be rekeyed to match a 5-pin house key | Comes with step-by-step instructions for easy installation.
Keystone heavy duty diecast metal two sided gravity latch | gate gap: 1/2 inch to 1-3/4 inch; 1 inch is ideal | Fits gate frames up to 5 inches | Gate Frames and posts must be square | Fasteners are included. The keystone latch features a simple, traditional design | UV Resistant | Will last over 1 million cycles | Part Number: KLADV-M2-BK-KA.
3. HauSun #ad
Barn, Black L Handle, Playhouse, HauSun Shed Door Handle Lock Kit 4-1/2" L Handle with 2 Keys and 2 Screws, Gate, Chicken Coop Door Lock and More, 4-1/2" Stem for Shed, Garage #adHauSun #ad
- Adjust the size : 4-1/2" stem will fit doors up to 4-1/2" thick. Remove set screw, then reinstall and tighten set screw to keep the bracket in place. Your existing “d” shaped latch on the inside holds the exterior handle on as it is fastened to the shaft with a set screws. Great for outdoor buildings such as storage shed doors, barn, Backyard and Chicken Coop door etc.
Easy installation : 3/8” drive bit is required to drill the installation hole if it's not for the replacement. The d handle latches to the door frame when you twist the front L handle. Includes: complete shed door lock kit includes outside locking l-handle, inside D-Handle and 2 Keys, playhouse, 2 Screws and 1 ⅛" Hex Key.
When installed correctly, the retaining screws are put in from the back of the door so no screw heads are exposed from the outside when locked. To adjust your bracket to the thickness of your door, slide bracket over the storage shed door handle shaft to desired position, there is a set screw that must be removed with the included Allen wrench.
Turn 90 degrees clockwise to open the door. Insert the front l-handle and adjust back D handle to the thickness of your door with allen wrench. Built to last: black powder coated finish to prevent corrosion on outside parts. And then fix the L-handle with 2 Phillips head screws. Convenient: this shed Door Hardware includes everything you need to install your shed door lock.
4. National Hardware #ad
Gate Thumb Latch N109-050 by National Hardware in Black #adNational Hardware #ad
- Modern thumb latch for gates, shed, and doors. Instructions and mounting hardware included. Equipped with easily operated locking feature for gates, sheds, and doors. Can be used on left or right handed gates.
|Brand||National Hardware #ad|
5. OAKMOORE #ad
Raleigh Premium Commercial Door Handle Grade 2 Storeroom Lockset Keyed – Schools Offices Industrial Standard – Grade 2 UL CUL and ADA – Nickel Chrome Finish – ANSI A156.2 #adOAKMOORE #ad
- Keep doors securely closed, save heat & conserve energy use. Commercial grade. Exterior lever - always locked. No small and fiddly parts, just reliable solid hardware that will pass the test of time.
Storeroom lever - prevent being locked in. Can be re-keyed. Ansi a156. 2. Face plate: 1" x 2-1/4". Commercial grade hardware - high quality commercial grade hardware at a fraction of the price in the stores.
Concealed fixing screws for an elegant design. Pick resistant. Fully reversible, heavy to hold. Tested to over 400, 000 open/close cycles. Latch 1" x 2-1/4. Ul / cul listed, right and left handed use. Requires key to open. Patented design. High density, bhma & ada. Backset: 2-3/4". Door thickness 1-3/8” to 2” suitable. Nickel finish.
6. National Hardware #ad
National Hardware V6201 LTCH BLK N346-201 4-9/16" LokkLatch Automatic Keyed Gate Lock Latch in Black #adNational Hardware #ad
- Can be used on metal, wood, and vinyl gates without rusting binding or staining. Side fixing legs deliver an easy installation with superior strength. Limited lifetime.
Can be adjusted horizontally and vertically during and after installation. Authorized replacement for Stanley Hardware Stock No. S836-163. Key lockable latch for added security; great for pool gates, sheds, and fences.
|Brand||National Hardware #ad|
|Warranty||Limited Lifetime Warranty|
7. D&D TECHNOLOGIES #ad
For Metal, Dual Sided Push/Pull Handle Latch, Key Lockable on Both Sides of Gate, Wood, Black, and Vinyl Fences, D&D Technologies LLMKDBT LokkLatch Magnetic #adD&D TECHNOLOGIES #ad
- Low maintenance - the latch allows for vertical and horizontal adjustments to accommodate for gate sag or ground movement over time. Easy installation - the lokklatch magnetic requires only one drilled hole through the post; fits fence posts 1 1/2"-6" deep.
Use both sides of gate - The LokkLatch Magnetic operates and locks from both sides of the gate. For metal, wood & vinyl gates - The LokkLatch Magnetic is made for securing metal, wood and vinyl gates. Keyed different- the lokklatch Magnetic comes in keyed different options.
8. Signstek #ad
Matte Black, Signstek Keyless Entry Door Lock,Digital Smart Door Lock for Front Door,Keypad Door Lock with Handle and Security Key,Touchscreen,Easy Installation #adSignstek #ad
- Touchscreen keypad with blue backlight: Touchscreen Keypad has good performance that it avoids the problems caused by unstuck physical buttons; The blue backlight enable you to enter passwords more convenient even in darkness. Insert the mechanical key.
Anti-peep password: users can create any random digits in front of or behind the correct password random digits +correct digits+ random digits so that you do not have to worry about being watched nearby when you input the password.
Note: the package does not include the batteries. Remove the keypad handle with a wrench. Easy installation: comes a hexagon screwdriver, just follow the user guide to finish the assembling even you are not a professional.
Turn the key clockwise and the electronic door lock opens. Interchangeable door handle and fashion appearance: Comes with the changeable door handle that the door lock can be used on left and right; The door lock is apply to be used in all kinds of the doors with upscale appearance. Hidden keyhole for emergency: no need to call firemen. The suitable door thickness for the door lock is 1. 38 inch -1. 97 inch.
9. Berlin Modisch #ad
Berlin Modisch Entry Lever Door Handle and Single Cylinder Deadbolt Lock and Key Slim Square Locking Lever Handle Set Front Door or Office Right & Left Sided Doors Heavy Duty – Iron Black Finish #adBerlin Modisch #ad
- Uniquely crafted low profile square shaped door lever and dead-bolt Entrance Set With 2 3/8 inch- 2 3/4 inch adjustable backset latches and square corner strikers.
Designed to complement modern contemporary style interior and exterior doors for commercial and residential applications front entry door handleset low profile lever and deadbolt set. Comes with unique thumb-turn interior lock knob that that is opened by an exterior key KW1 keyway for office or front doors, matt black color.
Durable & portable secure handle & deadbolt which Fits 1-3/8-Inch-1-3/4-Inch doors Iron Black Finish. Heavy duty high grade security door dead bolt and lever knob reversible that makes it perfect for fitting left or right handed doors.
10. SMARTSTANDARD #ad
Large Rustic Two-Side Design, for Gates Garages Sheds Furniture, SMARTSTANDARD Heavy Duty 12" Pull and Flush Barn Door Handle Set, Black Powder Coated Finish, Round #adSMARTSTANDARD #ad
- Package include: 1 x finger pull, 2 x screw l: 2 3/8 inchand 2 x pad diameter: 1 3/4 inch * thickness: 7/32 inch, 1 x pull handle, 2 x wrench * only the hardware is for sale, door not included. Finger pull size: l8 5/8inch x w 2 5/16inch x h 1/4inch depth 1/4Inch/pull handle size: l 12Inch x h 2 3/4Inch diameter of the pull handle is 1Inch.
Smartstandard handle can be used for doors, gates, closets, garages, barns, sliding doors etc. Easy to install: smartstandard barn door handle set includes all of the necessary hardware to install on your door.
Use the barn door pull and flush set on wood, sheds, glass or aluminum doors. Just drilling two holes in the door to combine the handle and finger pull with two screws.
Door panel thickness: 3/4 inch and 1-3/4 inch if you want to use for a thicker door panel, you can buy some longer screw to match the door. Widely use: can be installed on interior or exterior doors or with a variety of materials including wood, glass or aluminum doors. If the handle pillar is not tightened or needs to be removed, you could tighten it with the tiny wrench.
|Model||Pull and Flush Hardware Set|