As an Amazon Associate I earn from qualifying purchases.
KOTTO #ad - Easy to replace the filter, includes one replacement filter. Us-based customer support, 30 days full satisfaction no question asked return period.
Suction: 40w, noise level: 55dbm, 6000 rpm, 000 hours, life Expectancy: 50, 52CFM, Static pressure: 125mmH2O. Working temperature: -20℃～60℃, 40w 12v, power consumption: 120V-240V, 4A Power supply. Soldering smoke absorber, electric iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.
Fstop Labs #ad - Us based customer support, 30 days full satisfaction no question asked return period. 4 non-slip heavy duty rubber feet anchors the unit to the ground.
Solder smoke absorber/fume remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station. Working temperature: -20℃～60℃, 30W 50 / 60Hz. Handy carrying handle allows you to move the unit easily.
KNOKOO #ad - Multiple filtration system 3 layers - knokoo fume absorber continuously exhaust the welding fume and lead mist, and rapid discharges it into the Pre-filter, HEPA filter and activated carbon filter to purifier smoke and unpleasant odors. Frequency converter DC motor, environmentally friendly.
Fume extractor soldering fes 150 has wide range of applications: Smoke Removal, Harmful Gases Removal, Deodorization, Beauty nail salon, Dust Removal, Moxibustion and more;. Handle on both sides with built-in handles on both sides, mobile devices are more convenient.
Three -layer filter structure has larger dust capacitance than single-layer filter core, longer service time of filter core and more cost-saving. Each layer can be replaced separately. Energy-saving and environmental protection knokoo fume extractor creates a powerful Systemic Flow 278m³/h to exhaust and purify air, smoke filtered and discharged into the air, less power consumption, in line with the requirements of environmental impact assessment, high purification rate allow you to breathe fresh air again.
Antidious #ad - Horizontal or vertical : works efficiently in different environments. Smooth surface : made of high-grade abs components, which makes it very durable and sturdy. Ec motor : it can absorb smoke from 4-5 inches away, low noise, high energy saving, small vibration, Long-lasting working time for over 57000 hours.
Esd protection : surge protection suppress voltage transients and divert excessive current away from sensitive electronic components to protect your electronics.
Kulannder #ad - Perfect for soldering project. Easy to use: unique design for disassembly, activated carbon filter can easy to be replaced at any time. Low-noise & odourless: soldering fan uses a double roller design, there is low-noise and odourless in the process of use, let you feel immersed in work.
Including one replacement filter. Excellent suction: the optimized fume extrator’s air flow is up to 110CFM/3080L/min, so it has stronger suction.
MUIN #ad - Highly versatile: the high versatility of this fume extractor soldering fan enables you to stay relaxed and concentrated throughout Soldering, Woodworking, Wood-Burning Pyrography, and Crafting, 3D Printing, Nail Salons, Jewelry Making, Stained Glass, and Smoking.
Strong suction with slight noise: the predominantly optimized soldering fan empowers you to remove fumes even 4-5 Inches away with minor noise. We ensure quality by using ABS material in the construction of this solder extractor fan.
You will experience fresh, focused, and devoted working surroundings with this solder fan. Click add to cart and be ready to get a sturdy solder fumes extractor at your doorstep! Unusual storage saver: the highly compatible design of this solder filter heightens its portability, allowing it to take a minimum space to avoid cluttering on your desktop. Top-notch material: muin is working diligently in making expediting products so far.
Anztek #ad - The filter is made of special foam with refined activated carbon, which has high suction and flux absorption properties. It's a good helper for mobile phone maintenance, stained glass work, great for electronics, arts and crafts, soldering station work.
Solder smoke absorber/fume remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station. Optimized 3000 rpm high suction fan is low noise and allows you to remove fumes 5-6 inches away.
NOEVSBIG #ad - Can be rotated 360 degrees then "locked" into place with knurled thumb nuts. 100% satisfaction service： export products 100% quality inspection, all customers support 3 months of unconditional exchange or return policy and promise to provide a 3-year after-sales service.
Totally 30 illumination modes to meet all your requirements. Upgraded design: pure copper motor. The enclosure is made from metal. 4 non-slip heavy-duty rubber feet anchor the unit to the ground. They are strong to keep a tight grip on your components allowing you position them wherever you like.
3 lighting modes & 10 brightness levels - the led clip lamp featured with 3 color temperature：warm light, warm–white light and white light. Esd-safe design: the solder smoke absorber is made of ESD-safe materials. Each lighting mode has 10 brightness dimming levels. 3x magnifier lamp: magnified 3 times real glass lens helps you to view details or tiny things, improves your work precision and efficiency, keeps your eye from the strain. Easy to replace the filter: Includes two replacement filter.
180° #ad - Power consumption & free replacement filtertemperature range: -20°c to 60°C; power consumption: 120V, 30W 50/60Hz. It also comes with a Replacement Filter and It’s really easy to replace it. It is a portable and compact est Solder fume extractor with a noise-free Optimized 3000 RPM fan suction unit.
2 air flow-another way to get an idea of the performance of your solder smoke absorber is to check its airflow capacity. 3 warranty-while it does not affect the performance of your solder smoke absorber directly,.
How do you choose the best solder fume extractor?1power rating- since a solder smoke absorber has a fan inside, making sure that this fan is powerful enough for collecting all of the smoke is quite important. Very compact and light-weightedthe greatest thing about the 180° Solder Smoker Absorber is that 04 inches thick activated filter absorbs and captures solder fumes effectively and helps to dissipation into the room.
SainSmart #ad - The absorption of the sainsmart Solder Fume Extractor performs 30% better than other Solder Fume Extractor and only generates less noise. It is very easy to replace and we suggest that you replace the filter every 3 months. The parcel includes 3 pieces of extra activated carbon filter cotton for replacement.
Sturdy metal frame designmade of esd-safe metal, it is much sturdier and more durable than the solder smoke absorber with plastic frame. It can filter the toxic substances and purify your work area effectively.
No assembly required, just plug in and press the switch to use. Strong absorption with the large 15050 pure copper motor and the 3300 rpm high suction silent solder fan，the effective smoke absorber distance can reach 7. 9in. User friendly designboth the carrying handle and the 1. 3m long power cord allow you to move the machine easily. The helping hands can be rotated in 360 degrees and you can remove them out of the way when you don’t need them.
1. KOTTO
#adHose pre-attached, Electric Iron Welding, 3d Printing Extractor Absorber Remover DIY Extractor Carbon or HEPA Filter Updated, KOTTO Strong Suction Hose Fume Smoke Absorber for Soldering
#adSuction: 40w, noise level: 55dbm, 6000 rpm, 000 hours, life Expectancy: 50, 52CFM, Static pressure: 125mmH2O. Working temperature: -20℃～60℃, 40w 12v, power consumption: 120V-240V, 4A Power supply. Soldering smoke absorber, electric iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.
More information #ad
Adjustable optimized 6000 rpm high suction fan is low noise and allows you to remove fumes 5-6 inches away. A 24-inch flexible tube, Fume hood can adjust direction according to actual needs. The fan speed is adjustable.| Brand | KOTTO #ad |
| Manufacturer | KOTTO #ad |
| Part Number | FAN_SLD |
More information #ad
2. Fstop Labs
#adKOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station
#adSolder smoke absorber/fume remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station. Working temperature: -20℃～60℃, 30W 50 / 60Hz. Handy carrying handle allows you to move the unit easily.
More information #ad
04 inch thick activated carbon filter absorbs and captures fumes from solder, chemicals, flux, gases and helps to prevent dissipation into the room. Optimized 3000 rpm high suction fan is low noise and allows you to remove fumes 5-6 inches away. Easy to replace filter, power consumption: 120v, includes one replacement filter.| Brand | Fstop Labs #ad |
| Manufacturer | Fstop Labs #ad |
| Part Number | WV-05SN-Z9HB |
| Model | Yellow |
More information #ad
3. KNOKOO
#adKNOKOO Solder Fume Extractor HEPA Filter FES150 Welding Smoke Absorber Air Purifier 3 Stage Filter for Nail Salon Hair Salon and Soldering
#adFume extractor soldering fes 150 has wide range of applications: Smoke Removal, Harmful Gases Removal, Deodorization, Beauty nail salon, Dust Removal, Moxibustion and more;. Handle on both sides with built-in handles on both sides, mobile devices are more convenient.
More information #ad
360-degree universal adjustable smoking duct - the suction pipe is composed of many shortened pipes and each interface can be bent freely, greatly improving the adjustment angle. Power failure protection: when the machine is working, turning off the three-in-one switch on the side will automatically cut off the power. Three -layer filter structure has larger dust capacitance than single-layer filter core, longer service time of filter core and more cost-saving. Each layer can be replaced separately. Energy-saving and environmental protection knokoo fume extractor creates a powerful Systemic Flow 278m³/h to exhaust and purify air, smoke filtered and discharged into the air, less power consumption, in line with the requirements of environmental impact assessment, high purification rate allow you to breathe fresh air again.
| Brand | KNOKOO #ad |
| Manufacturer | KNOKOO #ad |
| Part Number | FES150 |
| Model | FES150 |
More information #ad
4. Antidious
#adAntidious Fume Extractor Anti-ESD Solder Smoke Absorber Portable Filter for Soldering DIY Fan Extraction Equipment with Spare Activated Carbon for Brazing Welding Soldering, Fume Prevention Remover
#adEsd protection : surge protection suppress voltage transients and divert excessive current away from sensitive electronic components to protect your electronics.
More information #ad
Easy to replace the filter : come with 2 filters, made of features urethane foam and activated carbon. Capture and absorbs of fumes and harmful smoke, ensures a breathable environment in your workspace. As long as you turn on the button, you can stop breathing the evil and smelly soldering fumes. Its small size allows users to keep it close to themselves without occupying too much space.| Brand | Antidious #ad |
| Manufacturer | Antidious #ad |
| Part Number | 0 |
More information #ad
5. Kulannder
#adSolder Smoke Absorber, Smoke Prevention Absorber Fume Extractor Fan with Carbon Filter for DIY Working Soldering Desoldering Rework Station
#adIncluding one replacement filter. Excellent suction: the optimized fume extrator’s air flow is up to 110CFM/3080L/min, so it has stronger suction.
More information #ad
Absorb harmful fumes: the filter consists of foam and activated carbon, Prevent the smoke from emitting into the room, which can absorb toxic fumes from solder, protect human health. Anti-skid design: the upgraded fume extractor has an anti-slip cotton at the bottom, which can be used to prevent slip and reduce vibration noise, giving you a quiet working space.| Brand | Kulannder #ad |
| Manufacturer | Kulannder #ad |
| Part Number | SmokerAbsorber03 |
| Model | SmokerAbsorber03 |
More information #ad
6. MUIN
#adMUIN 3 Stage Filtration Solder Smoke Absorber for Soldering and Wood Burning,Portable Soldering Fume Extractor Fan for Soldering Station Black, Solder Fume Extractor
#adStrong suction with slight noise: the predominantly optimized soldering fan empowers you to remove fumes even 4-5 Inches away with minor noise. We ensure quality by using ABS material in the construction of this solder extractor fan.
More information #ad
Eliminates irritating odors: featuring 3 Stage Filter, chemicals, flux, gases, the fume extractor effectively absorbs and seizes fumes from solder, and ease to overcome disturbing odors in your working spaces. You will experience fresh, focused, and devoted working surroundings with this solder fan. Click add to cart and be ready to get a sturdy solder fumes extractor at your doorstep! Unusual storage saver: the highly compatible design of this solder filter heightens its portability, allowing it to take a minimum space to avoid cluttering on your desktop. Top-notch material: muin is working diligently in making expediting products so far.
| Brand | MUIN #ad |
| Manufacturer | MUIN #ad |
| Height | 5.5 Inches |
| Length | 5 Inches |
| Width | 2.8 Inches |
| Part Number | HJ-1238 |
More information #ad
7. Anztek
#adSolder Smoker Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan Soldering with spare Carbon filter
#adSolder smoke absorber/fume remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station. Optimized 3000 rpm high suction fan is low noise and allows you to remove fumes 5-6 inches away.
More information #ad
Comes with 5 active carbon filters. The replacement of the activated carbon filter piece is convenient and quick. Long-lasting working time for over 50, 000 hours. It adopt the high performance fan with low noise, and the suction is strongThe structure is simple.| Brand | Anztek #ad |
| Manufacturer | Anztek #ad |
| Part Number | AZ-FS01 |
More information #ad
8. NOEVSBIG
#adSolder Fume Extractor Solder Smoke Absorber with 3X LED Magnifying Lamp and Flexible Arms DIY Working Fan for Soldering Station,3 PCS Carbon Filter
#adTotally 30 illumination modes to meet all your requirements. Upgraded design: pure copper motor. The enclosure is made from metal. 4 non-slip heavy-duty rubber feet anchor the unit to the ground. They are strong to keep a tight grip on your components allowing you position them wherever you like.
More information #ad
Soldering flexible arms: 2 adjustable metal gooseneck arms, two 4. 5" arms helping hand arms, completely free your hands up and work easier than ever before. A handy carrying handle allows you to move the unit easily. 3 lighting modes & 10 brightness levels - the led clip lamp featured with 3 color temperature：warm light, warm–white light and white light. Esd-safe design: the solder smoke absorber is made of ESD-safe materials. Each lighting mode has 10 brightness dimming levels. 3x magnifier lamp: magnified 3 times real glass lens helps you to view details or tiny things, improves your work precision and efficiency, keeps your eye from the strain. Easy to replace the filter: Includes two replacement filter.
| Brand | NOEVSBIG #ad |
| Manufacturer | NOEVSBIG #ad |
| Model | N-SE004-Fume Extractor-lamp |
More information #ad
9. 180°
#ad180° |Solder Fume Extractor| Solder Smoke Absorber| Fume Vape| Smoke Prevention Absorber| DIY Working Fan for Soldering| A noise-free Optimized 3000 RPM fan suction unit With a Replacement Filter
#ad2 air flow-another way to get an idea of the performance of your solder smoke absorber is to check its airflow capacity. 3 warranty-while it does not affect the performance of your solder smoke absorber directly,.
More information #ad
Power ratingwhile it is decently powerful, its airflow rating is given in RPM and not in CFM. Warranty and serviceprovides you with 24-hour email contact service & 30-day money-back guarantee. How do you choose the best solder fume extractor?1power rating- since a solder smoke absorber has a fan inside, making sure that this fan is powerful enough for collecting all of the smoke is quite important. Very compact and light-weightedthe greatest thing about the 180° Solder Smoker Absorber is that 04 inches thick activated filter absorbs and captures solder fumes effectively and helps to dissipation into the room.
| Brand | 180° #ad |
| Manufacturer | Hydragon Limited #ad |
| Part Number | SSARFE |
More information #ad
10. SainSmart
#adSainSmart Solder Fume Extractor Smoke Absorber with Flexible Magnetic Soldering Arms for Soldering DIY Working Station, 4 PCS Carbon Filter
#adSturdy metal frame designmade of esd-safe metal, it is much sturdier and more durable than the solder smoke absorber with plastic frame. It can filter the toxic substances and purify your work area effectively.
More information #ad
With 2 magnetic helping handsthis solder smoke absorber comes with 2 magnetic soldering helping hands making simple repairs even easier. 4 non-slip heavy-duty rubber feet anchor the unit to the ground. It can be placed on your working area stably, no worries about being easily moved during use. No assembly required, just plug in and press the switch to use. Strong absorption with the large 15050 pure copper motor and the 3300 rpm high suction silent solder fan，the effective smoke absorber distance can reach 7. 9in. User friendly designboth the carrying handle and the 1. 3m long power cord allow you to move the machine easily. The helping hands can be rotated in 360 degrees and you can remove them out of the way when you don’t need them.
| Brand | SainSmart #ad |
| Manufacturer | SainSmart #ad |
| Part Number | 542500261 |
| Model | 542500261 |
More information #ad
