As an Amazon Associate I earn from qualifying purchases.
Taytools #ad - Lot of 4 each 3/4” wide x 3/8” high x 48” long. Uses standard 1/4" hex heads, 1/4" T bolts or 5/16" T bolts. Thick. 100” sidewalls minimize bowing and twisting.
Taytools #ad - Once installed, fixture, the multiple T slots allow attachment of all kinds of stops, sacrificial/extended fences, drill press, jig or workstation.
Overall size is 2-7/8 inch tall and 5/8 inch thick. There are 2 t slots on one face and a single slot on all remaining faces. The track is made from premium grade extruded aluminum and has a black anodized finish.
POWERTEC #ad - Premium grade: high quality tracks made with corrosion resistant extruded aluminum for strength and long-term durability. Function: this multi-t track can be used for a wide assortment of woodworking projects, including creating general fixtures and jigs, workstations or customized fences router, drill press and miter gauge.
Universal: part of our exclusive multi-track system, this multi-functional item accepts the most common accessory fasteners 1/4” T-bolts, 5/16” T-bolts and 1/4” hex bolts.
Taytools #ad - Lot of 4 each 3/4” wide x 3/8” high x 24” long T Track. Counter sunk holes drilled 3" from each end and then every 6” for #6 screws.
Muzata #ad - Need the led channel which spotless lighting effect and diffuse the light better search for MUZATA U103. These led channels can be joined with extension connector search MUZATA LCB1 for longer distance lighting projects, or you may also search Muzata U1SW 2M to purchase 2M 6.
6ft leD channels. Each led housing segment is 1M 3. 3ft, total is 40M/132ft. The led track and cover can be cut down to any length. Please search for muzata lcu1 if need extra mounting clips and end caps, 40pcs smokey diffusers, 80pcs end caps, need more diffuser please search for MUZATA LC03.
Smokey diffuser let about the same amount of light thru as the clear, but knocks off the glare a little, it looks better. Muzata provide 90 degree l shape corner adaptersearch for muzata lcc1, cross corner connectors search for MUZATA LC10, T- Shape Corner Connectorssearch for MUZATA LC20 or please search for MUZATA U106 to get bendable led channel. Muzata u-shaped aluminum led channel/profile is anodized extruded and better heat dissipation.
Taytools #ad - Counter sunk holes drilled 3" from each end and then every 6” for #6 screws. Precision extruded aluminum. Thick. 100” sidewalls minimize bowing and twisting. 3/4” wide x 3/8” high x 48” long. Screws not included. Uses standard 1/4" hex heads, 1/4" T bolts or 5/16" T bolts.
POWERTEC #ad - Design: features constructed out of extruded anodized aluminum for optimal performance, in the bottom of the track, durability and t-track efficiency. Includes: 1 premium 48 inch miter t-track Combo.
Fittings: miter track accepts standard 3/4" x 3/8" Miter gauge bar | t-track possesses specialized T-slot Track mounting for standard 1/4”-20 hex-bolts not included. The straightness tolerance is within 0 Overview: combines a mini t-track and miter channel track into one solid aluminum dual t-track extrusion.
Taytools #ad - 3/4” wide x 3/8” high x 36” long. Uses standard 1/4" hex heads, 1/4" T bolts or 5/16" T bolts. Counter sunk holes drilled 3" from each end and then every 6” for #6 screws. Screws not included. Precision extruded aluminum. Thick. 100” sidewalls minimize bowing and twisting.
Taytools #ad - Lot of 2 each 3/4” wide x 3/8” high x 24” long T Track. Thick. 100” sidewalls minimize bowing and twisting. Screws not included.
Hot Target #ad - Strong>dimensions: each track size is 48" length x 3/4" width x 3/8" depth. B>material: constructed of high strength aluminum alloy 6063 for durability and wear resistance.
B>features : the surface is treated by anodized which greatly improves the rigidity and anti-corrosion. The qty of screws as below: 12 screws per T-Tack, 48 screws per set.
1. Taytools
#adCountersunk Holes Every 6" 112134, Accepts 1/4" Hex Bolts, 48" Aluminum T Track 3/4" by 3/8" Slot, 1/4" or 5/16" T Bolts, Lot 4 Each
#adMore information #ad
Counter sunk holes drilled 3" from each end and then every 6” for #6 screws. Precision extruded aluminum. Screws not included.| Brand | Taytools #ad |
| Manufacturer | Taytools #ad |
| Part Number | 112134 |
More information #ad
2. Taytools
#adRouter and Drill Press Fences 36 inch T Track, Taytools 36 inch Multi Slot Aluminum T Track 2-7/8 inches x 5/8 inch for Bandsaw
#adOverall size is 2-7/8 inch tall and 5/8 inch thick. There are 2 t slots on one face and a single slot on all remaining faces. The track is made from premium grade extruded aluminum and has a black anodized finish.
More information #ad
This heavy-duty t track is the perfect accessory for making a custom fence, router table or crosscut sled. Use taytools angle adjustable T Track Fence Brackets sold separately to attach to flush mounted T tracks in any table. It can be used to make fences for the bandsaw, hold-downs and feather boards using any standard ¼-20 T bolts or T nuts.| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Part Number | OA7599-8BA-36 |
More information #ad
3. POWERTEC
#ad3” High x 24" Long Multi Track, POWERTEC 71489 Aluminum Multi T-Track Fence with Laser Measure Left to Right
#adUniversal: part of our exclusive multi-track system, this multi-functional item accepts the most common accessory fasteners 1/4” T-bolts, 5/16” T-bolts and 1/4” hex bolts.
More information #ad
Optimal utility: 24 inches long superior straightness - laser measured left to right, spaced 3/4” apart on center, 3/4” thick and 3 inches high. Includes: 1 multi T Track Fence 24 inch.| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 3 Inches |
| Length | 24.1 Inches |
| Weight | 2.64 Pounds |
| Width | 0.8 Inches |
| Part Number | 71489 |
| Model | 71489 |
More information #ad
4. Taytools
#adLot 4 Each 24" Aluminum T Track 3/4" by 3/8" Slot, 1/4" and 5/16" T Bolts, Accepts 1/4" Hex Bolts, Countersunk Holes Every 6" 112114
#adMore information #ad
Precision extruded aluminum. Thick. 100” sidewalls minimize bowing and twisting. Uses standard 1/4" hex heads, 1/4" T bolts and 5/16" T bolts. Screws not included.| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Weight | 1.54 Pounds |
| Part Number | 112114 |
More information #ad
5. Muzata
#adMuzata LED Channel System with Smoke Clear Black Diffuser Cover Lens,Silver Aluminum Extrusion Track Housing Profile for Strip Tape Light,40Pack 3.3ft U Shape U1SW WB 1M, LU1
#ad6ft leD channels. Each led housing segment is 1M 3. 3ft, total is 40M/132ft. The led track and cover can be cut down to any length. Please search for muzata lcu1 if need extra mounting clips and end caps, 40pcs smokey diffusers, 80pcs end caps, need more diffuser please search for MUZATA LC03.
More information #ad
The solid led channel tracks are not flexible and not suit for bending. The inner wide of led housing is 05"12mm, fits 3528, 5050, 5630 led strip light, philips hue light strip 1st generation. Search for "muzata u102" to get the special designed aluminum LED channel track housing for Philips hue plus 2nd generation. Smokey diffuser let about the same amount of light thru as the clear, but knocks off the glare a little, it looks better. Muzata provide 90 degree l shape corner adaptersearch for muzata lcc1, cross corner connectors search for MUZATA LC10, T- Shape Corner Connectorssearch for MUZATA LC20 or please search for MUZATA U106 to get bendable led channel. Muzata u-shaped aluminum led channel/profile is anodized extruded and better heat dissipation.
| Brand | Muzata #ad |
| Manufacturer | MUZATA #ad |
| Part Number | MZZ263 |
| Model | U1SW |
More information #ad
6. Taytools
#adCountersunk Holes Every 6" 112130, Accepts 1/4" Hex Bolts, 1/4" or 5/16" T Bolts, 48" Aluminum T Track 3/4" by 3/8"
#adMore information #ad
| Brand | Taytools #ad |
| Manufacturer | Taytools #ad |
| Part Number | 112130 |
More information #ad
7. POWERTEC
#adPOWERTEC 71365 Aluminum Combo T-Track Miter Track for Woodworking | 48” Dual Track Rail, Aluminum Grey
#adFittings: miter track accepts standard 3/4" x 3/8" Miter gauge bar | t-track possesses specialized T-slot Track mounting for standard 1/4”-20 hex-bolts not included. The straightness tolerance is within 0 Overview: combines a mini t-track and miter channel track into one solid aluminum dual t-track extrusion.
More information #ad
Mounting/ versatile/: 7, countersunk to fit #8 wood screws, pre-drilled 3/16” holes, or attaching feather boards, perfect for building customer Router tables, adding miter tracks, 1-1/2” from each end then 7-1/2” apart, stops and cross slide fixtures.005" in all planes. An extruded line, provides for easy and precise alignment When mounting.| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 0.5 Inches |
| Length | 48 Inches |
| Weight | 2.15 Pounds |
| Width | 1.75 Inches |
| Part Number | 71365 |
| Model | 71365 |
More information #ad
8. Taytools
#ad36" Aluminum T Track 3/4" by 3/8" Slot, Accepts 1/4" Hex Bolts, 1/4" or 5/16" T Bolts, Countersunk Holes Every 6" 112120
#adMore information #ad
| Brand | Taytools #ad |
| Manufacturer | Taytools #ad |
| Weight | 0.55 Pounds |
| Part Number | 112120 |
More information #ad
9. Taytools
#adAccepts 1/4" Hex Bolts, Countersunk Holes Every 6" 112112, 1/4" or 5/16" T Bolts, Lot 2 Each 24" Aluminum T Track 3/4" by 3/8" Slot
#adMore information #ad
Counter sunk holes drilled 3" from each end and then every 6” for #6 screws. Precision extruded aluminum. Uses standard 1/4" hex heads, 1/4" T bolts or 5/16" T bolts.| Brand | Taytools #ad |
| Manufacturer | Taytools #ad |
| Part Number | 112112 |
More information #ad
10. Hot Target
#adT-track 48 inch with Wood Screws–Double Cut Profile Universal with Predrilled Mounting Holes -Woodworking and Clamps -High Strength Aluminum Alloy 6063 –Frosted Surface Anodized, 4 PK Blue
#adB>features : the surface is treated by anodized which greatly improves the rigidity and anti-corrosion. The qty of screws as below: 12 screws per T-Tack, 48 screws per set.
More information #ad
B>qty: each set contains 4 pcs track bar and 48 pcs #7x 5/8” flat head screws. So the track is very beautiful and don't show dirt, It is easy to strip away the greasy dirt on the track. B>easy to install: easy to install each track is equipped with pre-drilled mounting holes for simple installation.| Brand | Hot Target #ad |
| Manufacturer | Hot Target Direct #ad |
| Height | 0.38 Inches |
| Length | 48 Inches |
| Width | 0.75 Inches |
More information #ad
