As an Amazon Associate I earn from qualifying purchases.
1. Milescraft #ad
Milescraft 1318 Drillmate Drill Guide with chuck #adMilescraft #ad
- Perfect for straight or angled drilling, drilling on the edge of a board or on round stock. Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter.
Attaches to all 3/8" and 1/2" power drills and it also includes a 3/8" Capacity chuck with key. Angle cuts of 45 degree to 90 degrees, with a built in angle read out in the all metal base. Adjustable depth stop and spring action control of the head.
2. Karcy #ad
Drill Guide Karcy Drilling Guide 0-45 Angle For 1/4" and 3/8" Drills with Chuck 1 Set #adKarcy #ad
- Drilling guide is convenient, woodworking holes, round pipe drilling, can be drilled at an angle, smooth wall drilling. Material: carbide;color: Silver + Green;Angle range: 0-45°. Multi-angle drill guide attachment overall size: 140x290mm/5-1/2x11-3/7"WxH;Base size: 140x22mm/5-1/2x7/8" DxH;Itinerary: 145mm/5.
7". Package included: :1 x Drill-Guide. Angle can be adjusted as needed, with auxiliary handle, no shaking, 0-45° inclined hole for easy operation, with fastening drill clamp, safer.
3. Wolfcraft #ad
Wolfcraft 4525404 Multi-Angle Drill Guide Attachment For 1/4In. & 3/8In. Drills,Silver #adWolfcraft #ad
- Fits all 1/4-inch or 3/8-inch drills. Drill adapter itself slides up and down on guide-bars. Angle positions can go up to 45 degrees, and rubber pads in the base hold the guide in place.
Guide-bars themselves have springs for a quick return when doing repetitive drilling. Drill guide that can be used in horizontal, vertical or angle positions.
4. Milescraft #ad
Milescraft 1312 DrillBlock- Handheld Drill Guide #adMilescraft #ad
- Package dimensions:3. 05"l x 5. 33"w x 14. 48"h. The two product v-grooves allow for usage on corners and even cylindrical surfaces too.
Centerlines ensure accurate alignment when drilling into various surfaces. Non-slip feet holds the Drillblock in place while preventing both slipping and marring on wooden work pieces.
|Manufacturer||Milescraft Inc. #ad|
5. KREG #ad
Kreg K4 Pocket HoleJig System K4 Jig #adKREG #ad
- Requires no glue, no complicated math, and no small army of clamps. Clamping Method:Toggle clamp on benchtop base. Includes kreg jig k4, starter Kreg Screw set, 6 inch square driver, stepped drill bit, pocket-hole plug set.
Large clamping recess to secure your jig; Removable Drill Guide for benchtop and portable use. Removable drill guide block doubles as a repair tool; Drill Guide Spacings: 9/16", 7/8", 17/16". 3-hole drill guide for pocket holes, for use with materials from 12 to 38mm thick.
|Manufacturer||Kreg Tool #ad|
6. YEEZUGO #ad
YEEZUGO Floor Drill Press Stand Table for Drill Workbench Repair Tool Clamp for Drilling Collet,drill Press Table #adYEEZUGO #ad
- It has a sturdy column bar and the base has slots for fitting a machine vice, and 4 clamping points for mounting firmly with your worktable. It also features a depth adjustment scale and stop ith an adjustable scale ring for accurately setting the drilling depth, down to the last millimeter.
It includes separate adjustments for limiting press depth and drill height so you can change drill position with minimal risk of over-drilling into the stand.
The drill collar can be adjusted to suit a variety of tools and the stand is supplied with 3 different size collar inserts to suit smaller drills. With this drill stand, drilling at surfaces, round workpieces and boards can be done with absolute precision.
Substantially cheaper than purchasing a full drill press. This drill press stand has all the necessary features expected in a full-size drill press stand. This heavy duty drill stand is designed for power drills whose collar diameter is from 38mm to 43mm（1. 48'' to 1. 7'' with supplied reducing bush.
7. Muzata #ad
Portable Multi-Angle Visible Jig, Fit 30 45 90 Degree Deck Stair Angled Installation, Muzata Drill Guide for Cable Railing Lag Screw Kit Wood Post, Hole Size from 3/16" to 3/8" CT21 2 Pack, CT1 PG1 #adMuzata #ad
- Various hole sizes –this cable railing drill template guide jig offers 4 different size guide track holes fit 3/16”, 5/16”, 3/8” drill bit, 1/4”, those are compatible with most cable railing kits hardware. Recommend using Muzata. Now you can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with your hand drill.
Clamp the space rather than the bushing, please search 'F clamp', otherwise it may not hold securely. Portable-this drill guide for cable railing is light and small pocket carrying, compact and easy to carry. The hole drilled by 1/4-inch drill fit most 1/8" cable railings lag screw.
Visibility to position- the handrail drill guide is made of transparent acrylic with excellent visibility that you are easy to lock your selected position on the decking wood post which you want to drill hole. F clamp is not included, then choose a size larger than 8 inches.
The success of diY cable railing projects depends on drilling straight and accurate holes. Safe and easy operate-this handrail drill guide can work with 6” woodworking f clamp no shaking and safer drilling angle 30 and 45 degrees inclined hole and 90° horizontal vertical straight holes for 4”x4” posts and lager clamp for lager posts. Accurate and multi-angle -this cable railing drilling guide jig dowel allows you to drill 90 degrees horizontal vertical straight hole, 30 and 45 degrees angled holes for the wood railing post.
8. CIPCO PRO TOOL #ad
3/8" And 1/2" Power Drills, CIPCO PRO TOOL Multi-Angle Drill Guide Power Drill Stand with Chuck for 1/4” #adCIPCO PRO TOOL #ad
- All metal head : attaches to all 1/4”, 3/8" and 1/2" Power drills and it also includes a 3/8" Capacity chuck with key. Non-slip feet : prevent slipping and marring on the work surface, that can be removed to mount with screws when needed.
Depth stop & large handle : adjustable depth stop and spring action control of the head. Adjustable angle settings : angle readout for setting drilling angles to 45°, 60°, 75°, and 90°.
Please refer to the installation instructions and usage instructions in the video. Holds round materials securely : V-groove, Metal base and three v-grooves for drilling on round stock. Whether it’s on the wall, on the ceiling, or in round materials, at a slant, exact drilling is easy.
9. AIBER #ad
6/7/8/9/10mm Woodworking Tool Drill Guide Vertical Drilling Fixture #adAIBER #ad
- Packing included:1 x main body drill guide, 1 x 6mm drill bushing, 1 x 8mm Drill bushing, 1 x 9mm drill bushing, 1 x 10mm Drill bushing, 1 x 7mm Drill bushing, 2 x Allen keys.
Dimensions:main body drill guideapprox. 80x54mm/3. 14x2. 13". It is wear-resistant, rust-proof, durable. Net weight: about 100g. Function:centerlines ensure accurate alignment when drilling into various surfaces.
Easy to use:centerlines ensure accurate alignment when drilling into various surfaces. High-quality material: this drill guide woodworking tool made of Aluminum alloy 6061 anodized surface -- Aluminum alloy has strong structure, high hardness and long service life.
10. DCT #ad
Locating Pin, Guide, DCT SAE Drill Bit Guide Centering Punch 8-pc Center Drilling Set Kit – 3/16 to 1/2in Bushings #adDCT #ad
- Quickly find center: drop the included locating center punch pin inside the 3/16-inch bushing one way fit – flat top of pin first into bottom of bushing – do not attempt pointed tip end into bushing and then center over the spot to drill; To find the center line on an edge, place 2 small nails not included in drill guide holes and turn drill guide so each nail touches opposite side of the wood.
Precise drill guide: use the dct standard sae drill bit guide set to accurately locate exact drilling centers and guide drill bits perfectly perpendicular to the woodworking piece on flat, round, spherical, and corner edges; Economical drill press substitute with top quality and precision not a clamp or vise substitute; Additionally use as a quick and accurate dowel drilling guide for edge joining.
Variety of sae sizes: standard sae drill bushing sizes include 3/16”, 7/16”, 3/8”, 5/16”, 1/4”, and 1/2” inch; Each drill bushing has permanently laser-etched size markings for quick identification.
Contents: package includes 1 guide, 1 locating pin, and 6 standard drill bushings for your convenience. Drill any shape board: drill perfectly straight holes through even the thickest board no matter what the shape of the piece being drilled; Drill on sides, edges, use disc-shaped recess on bottom of drill guide; For cylinders and edges especially drilling pipe and dowels, and cylinders; For spheres, spheres, use V-shaped groove on bottom of drill guide to position drill guide.
|Warranty||This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.|