As an Amazon Associate I earn from qualifying purchases.
HammerHead Showers #ad - Buy with confidence knowing that you’re covered by our World-Class Customer Service and HammerHead Showers Limited Lifetime Warranty. Are you tired of those cheap plastic shower head holders that constantly break? designed and tested in the USA, whether it’s Delta, making this the last one that you’ll every need! Uniquely designed to fit a wide range of hand held showerheads, this showerhead holder by HammerHead Showers is built from the highest quality brass, Kohler or Moen.
Perfectly adjust the angle of your handshower with the shower arm mount’s brass pivoting ball, offering 360 degrees of rotation.
Supporting up to 13 pounds, you can confidently use your heaviest hand held shower heads without the shower head holder drooping. And with its 1/2" universal shower arm mount connector, you’ll be able to replace your old shower head holder in no time! We offer expert phone, email and live chat support for any questions you may have.
YDmeet #ad - Drill-free hand shower holder mount：provided with a strong adhesive glue for installation. But if without hand shower and any support point, it is hard to move and adjust. Note: waterpik massages Handheld Shower doesn’t work for this shower head wall holder. Heavy duty, all Metal, easy for daily clean and maintain.
If you find that the glue is dry, please contact us for a solution as soon as possible. The swivel ball joint is tightened to bear heavy shower heads without sliding down easily. Please mind and measure your shower hose bottom diameter before you order.
The adjustable shower head holder can freely swivel and adjust to maximum of 55° downward to meet you showering needs. Premium quality metal brass：made of solid brass, water-proof and rust-proof. Apply glue around the bottom edgeNot apply on the holder centre, then press tightly to completely contact the wall surface and use auxiliary sticker to help fix it. About installation：before installing handheld shower head holder, first must test and determine your installation height.
JiePai #ad - After the wall is dry, before use, press the suction cup firmly on the wall and push the transparent lowering button to the locked position. Leave it for 15 minutes before use to ensure the suction cup is fully sucked. When the wall surface is not smooth or not cleaned, stainless steel every two months, glass, and it is forbidden to put fragile items such as glass.
Easy install:drill free, clean the wall with a soft cloth. Strong suction shower head holder:maximum load-bearing capacity: 7. 5 pounds, when the wall is not smooth or there are debris, the load-bearing capacity is reduced.
Shower head holder is suitable for smooth and no concave convex smooth surface such as ceramic tile, emulsioni paint, smooth metal surface, smooth wood, etc. The others non-smooth surface please use 3M adhesive disc firstprovided in packageto overcome them, glass, such as rough wood, textured tile, etc. Instructions please view the listing description.
Hibbent #ad - Vacuum suction shower head holder: high-quality ABS plastic material with super strong vacuum adsorption capacity which can hold up to maximum 8 pounds weight shower head.
Simple and stylish: light weight ABS plastic material in shining chrome finish fits your modern style of home living. Flexibility: design for lower the showerhead, Well designed for people who cant reach the shower, 360 degree angle adjustable, especially children, handicaps.
BRIGHT SHOWERS #ad - Won't leave any holes on your walls. Maximum weight capacity: Sturdy enough to hold up to 6. 6lbs. Dual position: 2 adjustable shower angle positions.
Easy installation: the wall bracket suction can be applied directly onto a clean, smooth surface. No tools needed: mounts on any surface without requiring any drills, nails or screws. For textured/rough surfaces, we have included a transparent single side adhesive disc that can stick on the tile providing a smooth surface for the suction cup, Or a adhesive 3M disc that can provide a locking system to hold the shower holder, flat, double choices.
Hotel Spa #ad - This warranty is void if the product has been purchased from an unauthorized distributor. Tools-free installation. 2-foot vertical movement Range.
Height & angle adjustable shower Arm fits ANY Shower Head or Hand Shower. Solid brass arm with easy to tighten reliable joints to support heavier rainfall shower heads.
PHASAT #ad - This handheld shower head holder with 5-year warranty, if any quality problemNon-artificial damage, Complete Refund of Every Penny you Paid! Shower head holder all made of 304 stainless Steel, NON-plastics, which guarantee long performance life, All Metal Construction, Brushed Nickel finished.
Screw-mounted installation, need to drill two holes in the wall, wall mount shower wand holder, Diameter of mounting base is 1.9
Not fits for shower hose bottom diameter >=086”. Handheld shower head bracket holder with adjustable 360° swivel ball connection, up and down swivel angle is 46°23° per side, suitable for handheld shower head and bidet sprayer. Projection is 3". Screws on, comes with all mounting hardware.
Angle Simple #ad - Contemporary and functional alternative: sleek and simple shower wand holder is a functional replacement for the flimsy plastic one or the suction types that keeps falling off. Product dimensionW*D*H: 1. 1" x 1. 26" x 1. 1"28 x 32 x 28mm, inner diameter of the top opening is 7/8"22mm and inner diameter of the bottom is 3/4"19mm, please check the size before ordering and don't flip reversedly when install.
Convenient addition to your bathroom: featuring heavy duty and modern appearance, this shower holder is a great way to hang your shower arm at the convenient place to reach.
Quality material and sturdy construction: this handheld showerhead holder is solidly constructed of heavy brass with premium brushed finish for long term durability and reliability, effectively withstands rust and tarnishing, not easy to fade or bend. The distance between mounting holes: approximately 06"15mm from center to center. This robust shower head bracket will solidly cradle the heavy shower head. Fits standard shower wand: shower handle holder with clean and simple design is suitable for holding standard handheld showerhead/bidet sprayer.
Aqua Elegante #ad - We believe a shower bracket should be installed once and then enjoyed for many years. Just make sure to install your shower hose correctly. What this really means to you is peace of mind that the shower bracket will not crack or slip out of place when you want a RELAXING SHOWER.
No more dealing with shower brackets that slip or droop. Our mission is to have you enjoy a better shower right away. We are real people who use our own products every day. The longer, thinner connection attaches to the handheld shower head and sits in the shower bracket mount.
We expect the best for our family and want the SAME FOR YOURS. The bracket fits all standard shower plumbing 1/2" IPS threads and includes FREE Teflon tape. It also resists corrosion and withstands high pressure, minerals, salt, acids, thin plastic, heat, and grit in your water. The new mounts have slip-resistant o-riNGS to keep the bracket in place no matter how hot your shower.
G-Promise #ad - 10 years’ warranty brings you a fully confidence. Easy installation through a simple wrench to tighten the joint with the arm pipe till it is firmly fixed. Fits well with all the standard arm pipes and hoses. Any questions, e-mail to us, prompt response and service.
1. HammerHead Showers
#adAll Metal Shower Head Holder for Hand Held Showerheads, Brushed Nickel | Adjustable Shower Arm Mount with Universal Wall Hook Bracket and Brass Pivot Ball
#adPerfectly adjust the angle of your handshower with the shower arm mount’s brass pivoting ball, offering 360 degrees of rotation.
More information #ad
At hammerhead showers, we’re making them easy to install in minutes. In each box, 1x preinstalled rubber washer, we’re not just making solid metal shower products, you’ll receive 1x shower head holder, 1x roll of thread seal tape and easy-to-read installation instructions. Supporting up to 13 pounds, you can confidently use your heaviest hand held shower heads without the shower head holder drooping. And with its 1/2" universal shower arm mount connector, you’ll be able to replace your old shower head holder in no time! We offer expert phone, email and live chat support for any questions you may have.
| Brand | HammerHead Showers #ad |
| Manufacturer | HammerHead Showers #ad |
| Part Number | HOLDER-BN |
| Model | HOLDER-BN |
More information #ad
2. YDmeet
#adShower Head Holder Handheld Shower Wand Bracket Adhesive Shower Wall Mount Holder Brass Shower Spray Holder Brushed Nickel, Drill Free Glue Installation
#adIf you find that the glue is dry, please contact us for a solution as soon as possible. The swivel ball joint is tightened to bear heavy shower heads without sliding down easily. Please mind and measure your shower hose bottom diameter before you order.
More information #ad
After using for some time, the shower wand holder works fine. Not fits for shower hose bottom diameter >=09inch>=23mm. This adhesive shower head holder is easy to install in just few minutes. Dry for 48 hours after installation until the glue is completely solidified before using. The adjustable shower head holder can freely swivel and adjust to maximum of 55° downward to meet you showering needs. Premium quality metal brass：made of solid brass, water-proof and rust-proof. Apply glue around the bottom edgeNot apply on the holder centre, then press tightly to completely contact the wall surface and use auxiliary sticker to help fix it. About installation：before installing handheld shower head holder, first must test and determine your installation height.
| Brand | YDmeet #ad |
| Manufacturer | YD Bathroom & Kitchen #ad |
| Height | 1.78 Inches |
| Length | 2.68 Inches |
| Weight | 165 Grams |
| Width | 1.78 Inches |
| Part Number | YD-shower holder-brushed-FBA |
More information #ad
3. JiePai
#adJiePai Suction Cup Shower Head Holder Adhesive,Suction Handheld Shower Head Holder Bracket,Removable Wall Mount Holder with Adhesive Stick Disc for Bathroom,Brushed Nickel
#adEasy install:drill free, clean the wall with a soft cloth. Strong suction shower head holder:maximum load-bearing capacity: 7. 5 pounds, when the wall is not smooth or there are debris, the load-bearing capacity is reduced.
More information #ad
And slot diameter:3/4". Fit most shower head. But if a Big handheld showerhead. Please check the measurement before. It is recommended to re-adsorb on the surface of granite every other month, re-adsorb on the surface of smooth tiles, there will be air leakage after installation for a period of time, and re-adsorb every 3 months on the surface of 3M adhesive. Shower head holder is suitable for smooth and no concave convex smooth surface such as ceramic tile, emulsioni paint, smooth metal surface, smooth wood, etc. The others non-smooth surface please use 3M adhesive disc firstprovided in packageto overcome them, glass, such as rough wood, textured tile, etc. Instructions please view the listing description.
| Brand | JiePai #ad |
| Manufacturer | JiePai #ad |
| Height | 3.51 Inches |
| Length | 3.51 Inches |
| Width | 3.51 Inches |
| Part Number | YNA003 |
More information #ad
4. Hibbent
#adHibbent Vacuum Suction Cup Shower Head Holder, Brushed Nickel, Height Adjustable Shower wand Holder & Wall Mount ABS Plastic Suction Holder for Handheld Shower Head, Removable Shower Head Bracket
#adSimple and stylish: light weight ABS plastic material in shining chrome finish fits your modern style of home living. Flexibility: design for lower the showerhead, Well designed for people who cant reach the shower, 360 degree angle adjustable, especially children, handicaps.
More information #ad
Compatiblity: 3/4’’ slot diameter fits most standard showerheads in the market. Easy to install and remove: no tools, no screws. Install in seconds, no drills, just simply place the vacuum suction cup on the wall, without any damage.| Brand | Hibbent #ad |
| Manufacturer | Hibbent #ad |
More information #ad
5. BRIGHT SHOWERS
#adHandheld Shower head Holder with Adjustable Dual Positions, Brushed Nickel Finish, No Tools Required and Easy Installation, Wall Suction Bracket Includes Adhesive 3M Disc
#adEasy installation: the wall bracket suction can be applied directly onto a clean, smooth surface. No tools needed: mounts on any surface without requiring any drills, nails or screws. For textured/rough surfaces, we have included a transparent single side adhesive disc that can stick on the tile providing a smooth surface for the suction cup, Or a adhesive 3M disc that can provide a locking system to hold the shower holder, flat, double choices.
More information #ad
Fits standard showerheads: This product will hold standard handheld shower heads.| Brand | BRIGHT SHOWERS #ad |
| Manufacturer | BRIGHT SHOWERS #ad |
| Height | 3.94 Inches |
| Length | 2.99 Inches |
| Weight | 3.52 ounces |
| Width | 2.99 Inches |
| Part Number | PWB1210-02 |
More information #ad
6. Hotel Spa
#adBrushed Nickel, Hotel Spa 11" Solid Brass Adjustable Shower Extension Arm with Lock Joints. Lower or Raise Any Rain or Handheld Showerhead to Your Height & Angle / 2-Foot Range – Universal Connection
#adHeight & angle adjustable shower Arm fits ANY Shower Head or Hand Shower. Solid brass arm with easy to tighten reliable joints to support heavier rainfall shower heads.
More information #ad
No teflon tape needed, extra thick washer provides secure leak-free connection. 10 years limited warranty is provided by Interlink Products International, Inc. This product only contains Extension Arm. Connects in minutes to any standard outlet, no tools required.| Brand | Hotel Spa #ad |
| Manufacturer | Interlink Products #ad |
| Height | 11 Inches |
| Length | 3 Inches |
| Weight | 0.64 Pounds |
| Width | 1 Inches |
| Part Number | 4203 |
| Model | 4203 |
More information #ad
7. PHASAT
#adPHASAT Handheld Shower Head Holder Adjustable 304 Stainless Steel Handheld Shower Head Bracket Holder Wall Mount,Shower Wand Holder Brushed Nickel,A13021N
#adScrew-mounted installation, need to drill two holes in the wall, wall mount shower wand holder, Diameter of mounting base is 1.9
More information #ad
9". Shower holder is tapered design, bottom diameter is 07”, fit 3/4" us fit standard handheld shower heads. Top diameter is 086”, slot diameter:3/4 inches, depter diameter is 1”. Not fits for shower hose bottom diameter >=086”. Handheld shower head bracket holder with adjustable 360° swivel ball connection, up and down swivel angle is 46°23° per side, suitable for handheld shower head and bidet sprayer. Projection is 3". Screws on, comes with all mounting hardware.
| Brand | PHASAT #ad |
| Manufacturer | JIAHE SANITARY WARE #ad |
| Weight | 0.28 Pounds |
| Part Number | A13021N |
| Model | A13021N |
More information #ad
8. Angle Simple
#adHand Held Shower Wand Holder, Bidet Sprayer Holder, Angle Simple Brass Shower Handle Holder, Handheld Shower Head Holder, Shower Head Bracket, Shower Arm Holder Wall Mount, Brushed Nickel
#adConvenient addition to your bathroom: featuring heavy duty and modern appearance, this shower holder is a great way to hang your shower arm at the convenient place to reach.
More information #ad
Easy installation and secure attachment: package comes with mounting hardware for easy installation, securely mounted on the wall with the supplied screws and anchors. Lowering or raising the mounting position for kids or tall people makes life easier. Quality material and sturdy construction: this handheld showerhead holder is solidly constructed of heavy brass with premium brushed finish for long term durability and reliability, effectively withstands rust and tarnishing, not easy to fade or bend. The distance between mounting holes: approximately 06"15mm from center to center. This robust shower head bracket will solidly cradle the heavy shower head. Fits standard shower wand: shower handle holder with clean and simple design is suitable for holding standard handheld showerhead/bidet sprayer.
| Brand | Angle Simple #ad |
| Manufacturer | Angle Simple #ad |
| Weight | 0.2 Pounds |
| Part Number | A201P |
| Model | A201P |
More information #ad
9. Aqua Elegante
#adBrushed Nickel, Indoor And Outdoor Modern Bath Spa Fixture, Shower Arm Bracket, Adjustable Handheld Shower Arm Mount & Holder With Brass Connector
#adNo more dealing with shower brackets that slip or droop. Our mission is to have you enjoy a better shower right away. We are real people who use our own products every day. The longer, thinner connection attaches to the handheld shower head and sits in the shower bracket mount.
More information #ad
That is why we made our shower bracket super easy to INSTALL. We listened to customer feedback and improved upon the shower arm bracket. The wider connection attaches to the shower bracket. Unlike other shower brackets that are made from cheap, the aqua elegante shower arm bracket is made from robust abs thermoresin with a DURABLE BRASS FITTING that won’t crack or leak. We expect the best for our family and want the SAME FOR YOURS. The bracket fits all standard shower plumbing 1/2" IPS threads and includes FREE Teflon tape. It also resists corrosion and withstands high pressure, minerals, salt, acids, thin plastic, heat, and grit in your water. The new mounts have slip-resistant o-riNGS to keep the bracket in place no matter how hot your shower.
| Brand | Aqua Elegante #ad |
| Manufacturer | Aqua Elegante #ad |
| Height | 4.5 Inches |
| Length | 2.6 Inches |
| Weight | 0.19 Pounds |
| Width | 1.6 Inches |
| Part Number | Shower Arm Bracket - Brushed Nickel |
More information #ad
10. G-Promise
#adAdjustable Bracket, Universal Shower Arm Mount, Brushed Nickel Finish, Shower Arm Adapter, Metal Shower Head Holder for Hand Held Showerhead
#adMore information #ad
Unique design, unique structure! Solid brass construction, no worries of breaking, falling and leaking.1/2” ips female inlet, 1/2” ips male outlet. A multi-layer plating offers excellent outward. Every part is machined from the brass rod, perfectly seamless.| Brand | G-Promise #ad |
| Manufacturer | G-Promise #ad |
| Height | 2 Inches |
| Length | 4 Inches |
| Weight | 10.5 ounces |
| Width | 2 Inches |
| Part Number | G-0104N |
| Model | G-0104N |
More information #ad
