Top 10 Bit Driver Magnetic – Screwdriver Bit Holders

As an Amazon Associate I earn from qualifying purchases.

1. TEKPREM

#ad

190mm, TEKPREM 1/4 Inch Magnetic Bit Holder, Screwdriver Handle for Holding Bits and Screws with Non-slip Material and Strong Magnet Tip

#ad
TEKPREM #ad - Most of the other 1/4 inch screwdriver handle can only hold the bits but NON-MAGNETIC TO HOLD SCREWS. Strong magnet tip to hold bit and screws: this is a bit holder with very strong magnet tip, it will not only hold short screwdriver bits tightly and firmly but also magnetic to grip the screws.

Heavy duty: high quality and heavy duty screwdriver handle, a MUST HAVE screwdriver handle for holding bits. 1/4 inch screwdriver bit holder:this a screwdriver bit holder that have a magnetic bit adaptor that accept any 1/4 inch hex style long or short shank bits. Non-slip handle: the screwdriver handle is made of TPR and PP material which is non-slip, easy and pretty comfortable to hold in hand, very convenient to use for different repairs. Long screwdriver bit holder: the handle is 190mm long, make every your bits long enough to reach deep and more areas.
BrandTEKPREM #ad
ManufacturerTEKPREM #ad

2. Homthia

#ad

PZ1, 1/4 Inch Hex Shank Cross Single 2 Inch Length S2 Steel for Power Screwdriver Drill Impact Driver Tool Accessory, 12PCS Magnetic Anti Slip Screwdriver Bits SetPH1, PZ3, PH2, PH3, PZ2

#ad
Homthia #ad - Pack contains 12 metric hexagonal bits: 6 phillips bits PH1, PH2, PZ2, PH3 and 6 Pozi screwdriver bits PZ1, PZ3.1/4-inch hex-handle is compatible with many Devices: In addition to the regular cordless drill, it can also be installed in Impact Driver, electric, and manual screwdrivers.

Magnetic design & precise adjustment: Tightly absorb the screws, no slipping during use, not easy to fall off, improve work efficiency. Rust proof and durable material: Formed with high-quality S2 alloy, the whole is hardened and heat-treated, high hardness, wear resistance. Suitable for many applications: car, motorcycle, dashboard repair; general household appliances; household wire decoration; consumer electronics; toys, truck engine, interior decoration, etc.
BrandHomthia #ad
ManufacturerHomthia #ad

3. DEWALT

#ad

Magnetic Drive Guide, 14-Piece DW2097CS, DEWALT Screwdriver Bit Set

#ad
DEWALT #ad - Self-retracting guide also eliminates wobbling and slipping. Molder fits inside handy carrying case. Magnetic drive guides hold 1" screwdriver bits to drive screws in a variety of materials. Self-retracting guide sleeve protects fingers and holds screws in place.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height1 Inches
Length7.25 Inches
Weight0.47 Pounds
Width4.5 Inches
Part NumberDW2097CS
ModelDW2097CS
Warranty30 Day Money Back Guarantee

4. Wiha

#ad

Wiha 70486 | 6 Piece Color Coded Magnetic Nut Setter Set

#ad
Wiha #ad - Solid shaft For Strength And Durability. Secure hold: designed with industrial-Strength Magnets For Secure Fastener Hold And Reduced Breakage. Organization: high-visibility Color Coding For Quick And Easy Size Identification. Precision: exact-fit Precision-Machined Tips For Reduced Cam-Out.
BrandWiha #ad
ManufacturerWiha #ad
Height10.25 Inches
Length0.5 Inches
Weight1 Pounds
Width4.25 Inches
Part Number70486
Model70486

5. Rocaris

#ad

Rocaris 10 Pack Magnetic Extension Socket Drill Bit Holder 1/4" Hex Power Tools

#ad
Rocaris #ad - Must-have accessory set for power drills and impact drivers. Strong magnet holds bits securely, and the magnet is located inside the chrome tube. Designed for 1/4" hex shank bits. Great for working with hard to reach screws. Unlimited uses in automotive, hardware, hobby, home, etc.
BrandRocaris #ad
ManufacturerDrill Warehouse #ad
Height2.8 Inches
Length5 Inches
Weight0.05 Pounds
Width0.7 Inches
Part Number4158103
ModelD-06

6. DEWALT

#ad

DEWALT Nut Driver Set, 5-Piece DW2235IR, Impact Ready, Magnetic

#ad
DEWALT #ad - Industrial strength magnet maximizes fastener retention. Recessed corners = drives on flats which minimzes shavings. Extra-strength magnet for superior bit retention. Product designed for use in Impact Drivers and Wrenches.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height7 Inches
Length1 Inches
Weight0.02 Pounds
Width4 Inches
Part NumberDW2235IR
ModelDW2235IR

7. MAGNET GRIP PRO

#ad

Magnet Grip Pro Magnetic Drill Bit Set | Magnetic Collar Screw holder and Bit holder | Magnetic Screwdriver Bits | Fits ANY Standard Bit | No Wobbling or Falling Screws | Allows Countersink| 12 Pieces

#ad
MAGNET GRIP PRO #ad - 4 contractor grade steel Bits, 1 Bit adapter, and 1 Allen Wrench. Contractor grade steel - The Included bits are made out Pro-Grade S2 steel. No more dropped screws – our neodymium magnets are extremely powerful, ensuring that your screw stays attached to the bit! Universal fit - magnet grip pro comes with multiple sleeves to fit any standard drill bit.

Traditional magnetized bits may help to keep the screw in place but lack the strength to keep the bit from falling off. Work faster and save time – free up your other hand for anything else you may need with the Magnet GRIP PRO! The Magnetic sleeve holds any screw in place, letting you be more efficient with your other hand.

12 piece set - includes 1 universal screwdriver4 magnetic Sleeves to fit ANY bit. Simply slide your magnet grip Pro sleeve over the properly fitting power bit and utilize the rare earth magnet to help keep your bits in place.
BrandMAGNET GRIP PRO #ad
ManufacturerInformercials, Inc #ad

8. AKM

#ad

Quick-Change 1/4" Hex Shank | SAE & Metric | Cr-V Steel, Magnetic Hex Nut Driver, AKM 16-Piece Nut Driver Set

#ad
AKM #ad - Anti rust, anti slip, flexible. Prevent falling off and prolong service life. Cr-v steel: industrial grade chrome vanadium steel construction with corrosion resistant black phosphate coating for increased hardness.

Extra-strength magnet for superior bit retention. Sae: 1/4", 9/32", 1/2", 9/16". The bit holder is superior to similar products, will not be scattered, and is easy to store and organize. Includes: nut driver set comes with 16-piece 1/4-inch magnetic hex nut driver & red bit holder. Metric: 6mm, 3/8", 7mm, 10mm, 11/32", 8mm, 12mm, 13mm, 7/16", 5/16", 11mm, 14mm.

Visibility & durable: the size of each impact nut driver set is engraved by a powerful roller stamping machine, which is easy to identify and not easy to wear. Strong magnetic process: our 1/4-inch hex shank nut drivers uses a strong magnetic process. Anti-dropping: our magnetic nut driver set adopts gravity pressing process to inlay magnets, which is very strong.
BrandAKM #ad
ManufacturerAKM #ad
Height2.17 Inches
Length9.84 Inches
Width5.51 Inches
Part NumberAKM-qctt

9. Makita

#ad

Makita A-97134 ImpactX 1/4″ x 6″ Magnetic Nut Driver

#ad
Makita #ad - Performance-optimized S2 steel construction for extended life. Flat edges at hex opening for full contact with flanged hex head screws. Magnetic nut driver provides convenient pick-up and retention of hex fasteners. Calibrated heat treating process for added durability. Lobular design drives along flats to reduce rounding of hex fasteners.
BrandMakita #ad
ManufacturerMakita #ad
Height8.75 Inches
Length0.47 Inches
Width1.88 Inches
Part NumberA-97134
ModelA-97134

10. Neiko

#ad

Neiko 10250A Magnetic Hex Nut Driver Master Kit, Cr-V Steel | 1/4" Quick-Change Hex Shank | SAE & Metric | 12-Piece Set

#ad
Neiko #ad - Each external hex nut socket has a 1/4" socket that is compatible with quick-change/release chucks and locks firmly in standard chucks. Lobular design head fasteners with rounded edges grab nuts by the sides rather than corners to prevent stripping and lengthen service life.

Magnetic nut setter can be used with an impact/bit driver or hex socket ratchet to securely grab hexagonal nuts and fasteners for easy installation or loosening/removal. Industrial grade chrome vanadium steel construction with black phosphate coating for increased hardness, high strength and abrasion/corrosion resistant. Full master set comes with nut driver bits in both metric and SAE with each setter size clearly engraved on the side for easy identification.
BrandNeiko #ad
ManufacturerRidgerock Tools Inc. #ad
Height1.57 Inches
Length7.64 Inches
Weight1.49 Pounds
Width5.31 Inches
Part Number10250A
Model10250A