As an Amazon Associate I earn from qualifying purchases.
1. Desunia #ad
Adjusts from 3 7/8" to 6", Desunia Cabinet Leveler Legs, 12 Pack, 330 Lb. Capacity per Leg #adDesunia #ad
- Just attach to the back of the kick and snap it in place. Bring on the granite! ez micro adjustability - Just turn 'em with your fingers! WAY faster than messing with wood shims.
Huge height range - for kicks from 3 7/8" - 6" high. Heavy duty - each leg can support 330 lbs. Ez toe kick mounting - toe kick clips are included. It's all here - you get 12 legs, 6 toe kick clips, and all the necessary fasteners.
2. Fulton #ad
Heavy Duty Adjustable Furniture Leg Levelers, Shelving Units, Shop Cabinets and Furniture 4 Leveling Legs, Small Foot Ideal for Tables #adFulton #ad
- 3/8" shaft that adjusts from 0" to 2" in height. The unique design of the leg leveler allows for easier access to the adjustment bolt. Ideal for tables, shelving units, cabinets, furniture legs and a whole lot more.
Using all four levelers provides you with a load capacity of approximately 600 lbs. This allows you to micro adjust each leg until they are perfectly level to your desired height. Apx. The large 1-1/2" diameter heavy duty polyethylene foot will protect your floor and block any moisture from getting to the foot.
No more rust spots left on the floor surface. Easy to adjust with the included hex key wrench. The adjustable legs have a 10mm dia. The heavy duty leg levelers have an l-shaped mounting bracket made from a heavy gauge, plated steel that hook onto the bottom edge of you cabinet for better support and stability unlike standard levelers.
3. Antrader #ad
Antrader 4 Pack Heavy Duty 2000 LB. Capacity Leveler Legs, w/Corner Protector Guard Brackets, Workbench, Adjustable Leveling Feet for Furniture, Cabinets #adAntrader #ad
- 1/4"8mm thread, swivel/Tilting base with Nylon Glide. Perfect for cabinets, tables, or shelving units。. Set of four levelers has a load capacity of 1000 lbs.
Made of heavy gauge, plated steel. Pivoting steel base is capped in polyethylene for carpet and floor protection. 1-4/5" tall leveler 4/5" base. With 1-3/5" x 1-3/5" corner Protector Edge Guard.
4. HanKun #ad
4 PCS Height Adjustable Heavy Duty Furniture Legs Leveler Heavy Duty Leveling #adHanKun #ad
- Easy to install. Fixed base with plastic protective cap. Set of 4 - 1-1/2" leg levelers with T-nuts 5/16" - 16 thread. Set of four levelers has a load capacity of 800 lbs. Drill a 7/16" hole, tap in T-nuts and screw in leveler to the height you desire.
5. Xntun #ad
Cabinets Ect, for Furniture, Xntun 12 Pack Black Cabinet Leveler Legs Adjustable Furniture Legs Adjusts from 3-7/8" to 5-1/8" #adXntun #ad
- Easy install, adjustable Height. They are durable, Each leg can support 330 lbs. Unique design of adjustable height, just turn with your finger! It's much faster than filling in gaps with wood.
Including 72 screw. Accessories for diy furniture, Widely Applied to a humid environment room like kitchen, bathroom, cabinets ect, to prevent ground water corrosion cabinet. Perfect solve the problem of uneven floors, Suitable for kick line 3-7/8"-5-1/8" high.
6. VOVOV #ad
VOVOV Furniture Cabinet Metal Legs Adjustable Stainless Steel Kitchen Feet Round Black and Silver 50 x 50mm Pack of 4 + 16x Screw #adVOVOV #ad
- Made of Stainless Steel durable. Accessories for DIY furniture, cabinets, shelves ect. Size: 50x50mm diaxh;black steel pads width:60x60Mm 2. 35x2. 35inch;height:50mm/1. 96inch. Including 16 screw. Easy install, adjustable Height. Unique design of adjustable height.
7. Impromech Hardware #ad
Heavy Duty Furniture Leveler Tee Nut Kit – Set of 4-3/8-16 Non-Skid Leg Levelers for Cabinets or Tables to Adjust Height of The Legs or Feet Jam Nuts to Stabilize Each Foot Kit with 4 Prong T-Nuts #adImpromech Hardware #ad
- Set of 4 – adjustable heavy duty leveling Feet - 3/8-16 Thread with 1 3/8 inches of Adjustment. 4 prong 3/8-16 zinc Plated Tee Nuts. 1 11/16 inch non skid tpr rubber like Base with Steel Nickle Plated Cover Shell.
Jam nuts are included to Lock and Stabilize Leveler. Slot on the top and a Nut on the Base of Foot to Adjust Height.
8. Anwenk #ad
Cabinets, Workbench,Shelving Units and More, Anwenk Leveling Feet Heavy Duty Furniture Levelers Adjustable Table Leg Leveler w/Lock Nuts for Furniture,Table #adAnwenk #ad
- The leg leveler has 7/16” wide ledger, allows the mounting bracelet hooks onto the bottom edge of furniture for better support and stability. Free spinning foot design compensates for uneven/ irregular floors. Polyethylene cap protects floors and block moisture from getting to the foot.
Hex wrench for easy adjustment- 5mm hex wrench is included to allow micro adjustment on each leg until they are perfectly level to your desired height. Package includes 4x leveling feet, 16 Installation screws, 5mm hex wrench.
Versatile threaded legs- the leveling feet have heavy 3/8"-16 10mm dia shaft that adjusts height from 0" to 2-1/2". These heavy duty leg levelers hold up almost all heavy furniture you may have, without worrying about its quality.
Heavy duty leveling feet- these are 4 heavy gauge, cabinets, workbench, shelving units, plated steel furniture legs that help you adjust and level your table, bookcase and more.1320lbs weight support- each leveling leg support 330lbs, 4 legs support total 1320LBs. L-shaped mounting bracket- ensures the cabinet load is carried by the leveler, Not the screws.
9. BQLZR #ad
BQLZR Stainless Steel Kitchen Adjustable Feet Round 2" Dia Furniture Leg Pack of 4 #adBQLZR #ad
- Note: 4 legs can bear up to 100 kg, it can be rotated, the more unstable the force. Handy tool. Adjustable part is black plastic base, the longer the table legs, maximum adjustable height is about 15mm. Accessories for DIY furniture, cabinets, shelves.
10. Anwenk #ad
Large Base,w/ 4 Felt Pads 4 Pack, Leveling Feet for Tables Chairs Cabinets Sofa Raiser, Support 1320LBs, T- Nut Kit 3/8”-16 Thread, Heavy Duty Furniture Levelers Adjustable Furniture Legs Levelers #adAnwenk #ad
- Heavy duty & large furniture leg levelers- allow easy leveling of furniture at home, school or café, to match in same height. Comes with separate high density thick felt for hardwood floor to protect floor from scratches or harsh noises.
Easy installation- for furniture legs with existing 3/8"-16 thread, pre-drill a 1/2” hole and insert the t-nut for universal installation, simply screw in the leg leveler to adjust the height. Or, screw in the leg levelers and adjust to the desired height.
They allow raising your furniture, restaurant, office, and help slide your furniture at ease !. Heavy duty & 1320lbs max support- commercial quality furniture levelers, t-nuts and thread insert are made of steel that support over 330LBs per feet, so a set of four can support furniture 1320LBs! For all floors- universal nylon bottom that work for all floors such as hardwood/tile/carpeting floors.
Adjustable leveling feet - 1. 75” long steel insert with 3/8-16” thread; large commercial quality 1 3/8" Diameter 1/2” Thick Base and Fully Adjustable Height from 3/4” to 1 3/4” for Maximum Support and Adjustability.