Moore Push-Pin 5-100 Aluminum Push Pins, 100 per Box

#ad
#ad
Moore Push-Pin 5-100 #ad - Aluminum push Pins with a 5/8-inch Point. They are strong and durable. Etxra long 5/8-inch hardened steel point. 1/2-inch aluminum head. Packaged in a reclosable box. American Made. Perfect for arts and crafts. Durable and strong.

More information about Moore Push-Pin 5-100 #ad

Moore Push-Pin Aluminum Push-Pins 4-100 4-100

#ad
#ad
Moore Push-Pin Company 4-100 #ad - Moore Push-Pin Aluminum Push-Pins 4-100 4-100 #ad - 1/2-inch Point. American Made. Aluminum push Pins with a 1/2" Point. Packaged in a reclosable box. Perfect for arts & crafts 1/2-inch Aluminum Head. They are strong and durable.

More information about Moore Push-Pin Company 4-100 #ad


Similar products



Studio Pro 692 - 12" X 12" - Heat Resistant Stained Glass Work Surface

#ad
#ad
Diamond Tech International 692 #ad - This 12-inch-by-12-inch heat resistant work surface is made from insulation material and is a perfect work surface for soldering copper-foiled stained glass. Can also be used as work surface for electronics soldering. Heat resistant & durable - made from 1/2" thick insulation material elevates project. 1/2-inch thick.

Stained glass work surface - Ideal for cutting and assembling stained glass projects. Ample space for small stained glass projects with room to spread-out tools and equipment. Shape and size conveniently stores away when not in use. A must have in any studio - easily move your uncompleted project to different areas of your work space.

Studio Pro 692 - 12" X 12" - Heat Resistant Stained Glass Work Surface #ad - Add multiple boards to create a larger work surface. 1/2-inch Point. Protects table and counter top surfaces from heat damage. Use for multiple projects - use to protect from solder and copper-foiled projects. Soft but rigid material accepts thumbtacks to hold projects in place. Square shape- 12" x 12" area is perfect for small projects while still having room for tools.

American Made. 1/2-inch Aluminum Head.

More information about Diamond Tech International 692 #ad


Similar products



ARROW 160478 Push Pin Picture Hooks, 8 pk

#ad
#ad
Liberty Hardware 160478 #ad - Stained glass work surface - Ideal for cutting and assembling stained glass projects. Add multiple boards to create a larger work surface. Push pin style picture hooks. 5 lb capacity. Nickel plated. Easy to install into most walls by hand. Arrow brand hardware is how it all comes together. Soft but rigid material accepts thumbtacks to hold projects in place.

ARROW 160478 Push Pin Picture Hooks, 8 pk #ad - Square shape- 12" x 12" area is perfect for small projects while still having room for tools. 1/2-inch Aluminum Head. Can also be used as work surface for electronics soldering. Heat resistant & durable - made from 1/2" thick insulation material elevates project. Check out the full selection of ARROW hardware for your home project.

American Made. Shape and size conveniently stores away when not in use. A must have in any studio - easily move your uncompleted project to different areas of your work space. 1/2-inch Point. 8 hooks included. Protects table and counter top surfaces from heat damage.

More information about Liberty Hardware 160478 #ad


Similar products



Studio Pro cialty FID Pack

#ad
#ad
Diamond Tech International 665 #ad - Protects table and counter top surfaces from heat damage. Use for multiple projects - use to protect from solder and copper-foiled projects. 5 lb capacity. Easy to install into most walls by hand. Nickel plated. 1/2-inch Point. American Made. Use the unique rooster-shaped fid to widen lead channels or burnish foil; while the straight line simplicity of the second fid, effectively burnishes foil for a nice smooth surface, essential for even solder lines.

Thread a strap clip or neck chain adapter through both sides of the vinyl proximity badge holder to lock it into place. Badge holders are designed to keep your valuable, high-tech proximity card safe, clean and secure. Double your foiling ease with Studio Pro fid pack. Id badge card sold separately cannot be removed when clip is attached.

Studio Pro cialty FID Pack #ad - 1/2-inch Aluminum Head. Contains 2 specially designed plastic fids destined to become your most indispensable tools. Can also be used as work surface for electronics soldering. Heat resistant & durable - made from 1/2" thick insulation material elevates project. Stained glass work surface - Ideal for cutting and assembling stained glass projects.

More information about Diamond Tech International 665 #ad


Similar products



Moore Push-Pin 3-100 Aluminum Push Pins

#ad
#ad
Moore Push-Pin 3-100 #ad - American Made. 1/2-inch Aluminum Head. Packaged in a reclosable box. Protects table and counter top surfaces from heat damage. Use for multiple projects - use to protect from solder and copper-foiled projects. Add multiple boards to create a larger work surface. Push pin style picture hooks. Soft but rigid material accepts thumbtacks to hold projects in place.

Square shape- 12" x 12" area is perfect for small projects while still having room for tools. 1/2-inch Point. American Made. 1/2-inch aluminum head. Durable and strong. Thread a strap clip or neck chain adapter through both sides of the vinyl proximity badge holder to lock it into place. 8 hooks included. Aluminum push Pins with a 3/8-inch Point.

Moore Push-Pin 3-100 Aluminum Push Pins #ad - Perfect for arts and crafts. Can also be used as work surface for electronics soldering. Heat resistant & durable - made from 1/2" thick insulation material elevates project. Stained glass work surface - Ideal for cutting and assembling stained glass projects. Badge holders are designed to keep your valuable, high-tech proximity card safe, clean and secure.

More information about Moore Push-Pin 3-100 #ad


Similar products



Kwik Clean Flux Cleaner 16 Oz

#ad
#ad
Kwik Clean KwikClean #ad - Also use with patina: use either the same paper towel or a clean one to apply the patina. Mixing the kwik-clean with Patina gives added cleaning of the flux and a finer tone on the patina. After patina is applied, clean again with Kwik-Clean. Easy to install into most walls by hand. 1/2-inch Aluminum Head. Also use with patina: use either the same paper towel or a clean one to apply the patina.

8 hooks included. Kwik-clean flux remover doesn't need mixing or diluting. American Made. 1/2-inch aluminum head. Protects table and counter top surfaces from heat damage. Use for multiple projects - use to protect from solder and copper-foiled projects. Mixing the kwik-clean with Patina gives added cleaning of the flux and a finer tone on the patina.

Kwik Clean Flux Cleaner 16 Oz #ad - Soft but rigid material accepts thumbtacks to hold projects in place. Square shape- 12" x 12" area is perfect for small projects while still having room for tools. Polish as you normally would. Just spray on kwik-clean when you're done soldering, then use paper towel to clean project thoroughly. 1/2-inch Point.

More information about Kwik Clean KwikClean #ad


Similar products



Studio Pro Foil Shears

#ad
#ad
Diamond Tech International 604 #ad - Stained glass work surface - Ideal for cutting and assembling stained glass projects. These shears remove the same amount of paper as the thickness of foil, so you get a precisely cut pattern, eliminating grinding time. Just spray on kwik-clean when you're done soldering, then use paper towel to clean project.

Eliminate grinding time with a precisely cut pattern. Regular 3/8-inch hardened steel point. Designed for comfort, durability and performance, Studio Pro high quality glass tools and accessories are an excellent value and will quickly become a favorite for any stained glass project. Also use with patina: use either the same paper towel or a clean one to apply the patina.

Studio Pro Foil Shears #ad - Mixing the kwik-clean with Patina gives added cleaning of the flux and a finer tone on the patina. After patina is applied, clean again with Kwik-Clean. 5 lb capacity. Can also be used as work surface for electronics soldering. Heat resistant & durable - made from 1/2" thick insulation material elevates project.

American Made. 8 hooks included. Thread a strap clip or neck chain adapter through both sides of the vinyl proximity badge holder to lock it into place.

More information about Diamond Tech International 604 #ad


Similar products



Stained Glass Flux Brushes / 6 Pack

#ad
#ad
VGCE WBBRUS-6 #ad - The overall length of each brush is approximately 6". Durable and strong. Just spray on kwik-clean when you're done soldering, then use paper towel to clean project. American Made. Disposable brush for applying flux, patinas, and other chemicals. Thread a strap clip or neck chain adapter through both sides of the vinyl proximity badge holder to lock it into place.

Stained Glass Flux Brushes / 6 Pack #ad - Protects table and counter top surfaces from heat damage. Use for multiple projects - use to protect from solder and copper-foiled projects. Polish as you normally would. Designed for comfort, durability and performance. Id badge card sold separately cannot be removed when clip is attached. Kwik-clean flux remover doesn't need mixing or diluting.

Easy to install into most walls by hand. Remove the same amount of paper as the thickness of foil. 8 hooks included. Pack of six. The overall length of each brush is approximately 6". Add multiple boards to create a larger work surface. Push pin style picture hooks.

More information about VGCE WBBRUS-6 #ad


Similar products



8 Oz - Novacan Old Masters Flux

#ad
#ad
Novacan Industries OMFLUX #ad - Novacan Old Masters Flux. 1/2-inch aluminum head. Protects table and counter top surfaces from heat damage. Use for multiple projects - use to protect from solder and copper-foiled projects. Eliminate grinding time with a precisely cut pattern. Durable and strong. Can also be used as work surface for electronics soldering.

Heat resistant & durable - made from 1/2" thick insulation material elevates project. Badge holders are designed to keep your valuable, high-tech proximity card safe, clean and secure. Regular 3/8-inch hardened steel point. Stained glass work surface - Ideal for cutting and assembling stained glass projects.

8 Oz - Novacan Old Masters Flux #ad - Just spray on kwik-clean when you're done soldering, then use paper towel to clean project. Pack of six. 8 oz. The overall length of each brush is approximately 6". Thread a strap clip or neck chain adapter through both sides of the vinyl proximity badge holder to lock it into place. 5 lb capacity. All-purpose zinc flux.

8 hooks included.

More information about Novacan Industries OMFLUX #ad


Similar products



ADVANTUS Aluminum Head Push Pins, Steel 5/8-Inch Point, Silver, 100 per Box CPAL5

#ad
#ad
#N/A! CPAL5 #ad - Eliminate grinding time with a precisely cut pattern. 5 lb capacity. 1/2-inch Aluminum Head. Use them for bulletin boards, cork strips, map marking, hanging posters or just putting up notes in your office cubicle. Smooth extended heads for ease of use. Protects table and counter top surfaces from heat damage. Use for multiple projects - use to protect from solder and copper-foiled projects.

ADVANTUS Aluminum Head Push Pins, Steel 5/8-Inch Point, Silver, 100 per Box CPAL5 #ad - Polish as you normally would. Designed for comfort, durability and performance. Novacan Old Masters Flux. Badge holders are designed to keep your valuable, high-tech proximity card safe, clean and secure. American Made. Soft but rigid material accepts thumbtacks to hold projects in place. Square shape- 12" x 12" area is perfect for small projects while still having room for tools.

8 hooks included. Pin lengths of 0625 inches each. 8 oz. Nickel plated. Sharp steel points.

More information about #N/A! CPAL5 #ad


Similar products