Anderson Metals Brass Tube Fitting, Half-Union, 3/8″ Flare x 1/4″ Male Pipe

#ad
#ad
Anderson Metals 54048-0604 #ad - They are made of brass, stainless steel, PBT polybutylene terephthalate, and other materials that resist corrosion and wear. This fitting can be used with copper, brass, aluminum, or steel tubing to connect and disconnect two tubes more easily than with a coupling. Resists mechanical pullout for a more secure connection.

Tube fittings have various types of connections, barbed, welded, including threaded, and push-to-connect also called one-touch. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. It has a flared tube connection on one end and a male National Pipe Taper NPT connection on the other for connecting to a female NPT threaded tube, creating a tighter seal than straight threads.

Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 1/4" Male Pipe #ad - Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. 45-degree flare head tube connection on one side and a male NPT connection on the other. Operating temperature range of -65 to +250 degrees F. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

S. A. This anderson metals half union compression tube fitting is made of brass, has a flared tube connection and a male NPT connection, and is suitable for use with fuel and gas systems.

More information about Anderson Metals 54048-0604 #ad

Anderson Metals Brass Tube Fitting, Coupling, 3/8" Flare x 1/4" Female Pipe

#ad
#ad
Anderson Metals 54046-0604 #ad - This anderson metals coupling compression tube fitting is made of brass, has a flared tube connection and a female NPT connection, and is suitable for use with fuel and gas systems. This coupling compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.

Tube fittings are components used for connecting, terminating, branching, and changing the direction of tubing in pneumatic and hydraulic systems. Tube fittings are used in various applications, and automated production lines, airplane and truck controls, including machine tools, among others. Anderson metals manufactures brass fittings, valves, and pipe nipples.

Anderson Metals Brass Tube Fitting, Coupling, 3/8" Flare x 1/4" Female Pipe #ad - It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect two tubes of the same diameter in a straight run. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

S. A. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. It has a flared tube connection on one end and a female National Pipe Taper NPT connection on the other, creating a tighter seal than straight threads.

More information about Anderson Metals 54046-0604 #ad


Similar products



KIBOW 0~30 PSIG Type 1QCC1 Adjustable High Pressure Propane Regulator w/0~60PSI Gas Flow Indicator for Forge/Foundry

#ad
#ad
KIBOW XQS01G #ad - Operating temperature range of -65 to +250 degrees F. When your propane gas left in your tank too low, or the capacity flow of your appliance exceeds this regulator's Max. Flared tube connection on one side and a female NPT connection on the other. Works with standard refillable 20LB propane tanks or larger tanks.

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Hose measures 4 Feet long. 130, it will shutoff the gas flow automatically. Type 1qcc 1 tank end connector & 5/8"-18 UNF outlet connection3/8 inch female flare fitting has an outside diameter of 5/8 inch.

KIBOW 0~30 PSIG Type 1QCC1 Adjustable High Pressure Propane Regulator w/0~60PSI Gas Flow Indicator for Forge/Foundry #ad - Please do not apply this regulator to an appliance which supposed to equipped with a LOW PRESSURE regulator. No ptfe tape needed for connection seal. And its territories. Output pressure 0~30 psig adjustable regulator with outlet gas flow indicator 0~60 PSIG. Installed with pressure gauge, perfect for propane forges and foundriesspecifications: -hose Length: 4 Foot/48 Inch -Inlet Pressre: 25~250 PSIG -Outlet Pressure: 0~30 PSIG adjutable -Outlet Connection: 3/8" Female flare swivel fitting Coupling fitting for connecting two tubes with the same diameter.

Leak-test required before use. Flow capacity too much, unless it's defective itself.

More information about KIBOW XQS01G #ad


Similar products



LASCO 17-6785 3/8-Inch Female Flare by 1/4-Inch Male Pipe Thread Brass Adapter

#ad
#ad
LASCO 17-6785 #ad - The regulator can still work when those problems improved, 000 BTU/hr rating at 30 PSIG pressure. Not for use in potable drinking water applications. 1/4 inch male. Flared tube connection on one side and a female NPT connection on the other. Equipped with Excess Flow Protection. Female flare by male pipe thread adater.

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Type 1qcc 1 tank end connector & 5/8"-18 UNF outlet connection3/8 inch female flare fitting has an outside diameter of 5/8 inch. Please do not apply this regulator to an appliance which supposed to equipped with a LOW PRESSURE regulator.

LASCO 17-6785 3/8-Inch Female Flare by 1/4-Inch Male Pipe Thread Brass Adapter #ad - No ptfe tape needed for connection seal. Hose measures 4 Feet long. 130, it will shutoff the gas flow automatically. Used for fuel, air, oil, liquid petroleum LP and natural gas lines connections.3/8-inch female flare by 1/4-Inch male pipe thread. Flow capacity too much, unless it's defective itself. Easy and quick to install.

More information about LASCO 17-6785 #ad


Similar products



Anderson Metals Brass Pipe Fitting, Coupling, 1/4" x 1/4" Female Pipe

#ad
#ad
Anderson Metals 56103-04 #ad - Brass adapter. Flow capacity too much, unless it's defective itself. Easy and quick to install. Type 1qcc 1 tank end connector & 5/8"-18 UNF outlet connection3/8 inch female flare fitting has an outside diameter of 5/8 inch. Please do not apply this regulator to an appliance which supposed to equipped with a LOW PRESSURE regulator.

No ptfe tape needed for connection seal. The operating temperatures for this fitting range from -53 to 121 degrees C -65 to 250 degrees F. This fitting meets american society for testing and materials ASTM B584 and American Society of Mechanical Engineers ASME/American National Standards Institute ANSI B16 specifications for quality assurance.

Anderson Metals Brass Pipe Fitting, Coupling, 1/4" x 1/4" Female Pipe #ad - Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Operating temperatures range from -53 to 121 degrees C -65 to 250 degrees F. The company, founded in 1951, is headquartered in Kansas City, MO. Brass material lasts long.

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Flared tube connection on one side and a female NPT connection on the other.

More information about Anderson Metals 56103-04 #ad


Similar products



Mr. Heater 1"-20 Male Throwaway Cylinder thread x 1/4" Female Pipe Thread Fitting

#ad
#ad
Mr. Heater F276140 #ad - And its territories. 1"-20 male. 1-year limited warranty. Coupling for connecting two pipes with the same diameter in a straight run. This quality gas connection fitting will make any Job easier to complete Coupling fitting for connecting two tubes with the same diameter. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

Mr. Heater 1"-20 Male Throwaway Cylinder thread x 1/4" Female Pipe Thread Fitting #ad - S. A. Equipped with Excess Flow Protection. Resists mechanical pullout for a more secure connection. 1/4 inch male. Leak-test required before use. 3/8 inch female. All brass construction. Brass material lasts long. Operating temperature range of -65 to +250 degrees F. Used for fuel, oil, air, liquid petroleum LP and natural gas lines connections.

3/8-inch female flare by 1/4-Inch male pipe thread. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A.

More information about Mr. Heater F276140 #ad


Similar products



Anderson Metals Brass Tube Fitting, 45 Degree Elbow, 3/8" Flare x 1/4" Male Pipe

#ad
#ad
Anderson Metals 04095-0604 #ad - This 45-degree elbow tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications. Tube fittings are components used for connecting, terminating, branching, and changing the direction of tubing in pneumatic and hydraulic systems.

And its territories. Output pressure 0~30 psig adjustable regulator with outlet gas flow indicator 0~60 PSIG. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. This fitting can be used with copper, aluminum, or steel tubing and is part of an assembly that resists mechanical pullout for a more secure connection, brass, and can be assembled and reassembled without affecting the seal.

Anderson Metals Brass Tube Fitting, 45 Degree Elbow, 3/8" Flare x 1/4" Male Pipe #ad - Leak-test required before use. 3/8 inch female. They are made of brass, pBT polybutylene terephthalate, stainless steel, and other materials that resist corrosion and wear.1-year limited warranty. This anderson metals 45-degree elbow tube fitting is made of brass, has a flared tube connection and a male NPT connection, and is suitable for use with fuel and gas systems.

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

More information about Anderson Metals 04095-0604 #ad


Similar products



GASPRO 1/4 Inch RV Propane Quick Connect Fittings, Natural/LP Gas Propane Quick Disconnect Kit with Shutoff Valve, Full Flow Plug 100% Solid Brass

#ad
#ad
GASPRO GASPRO_QP1-2 #ad - Type 1qcc 1 tank end connector & 5/8"-18 UNF outlet connection3/8 inch female flare fitting has an outside diameter of 5/8 inch. Please do not apply this regulator to an appliance which supposed to equipped with a LOW PRESSURE regulator. No ptfe tape needed for connection seal. 1-year limited warranty. Equipped with Excess Flow Protection.

These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Easy to install, no tools required. Full flow plug: 1/4" male NPT x Male Quick Connector. Meets specifications astm b584 and ASME/ANSI B16 for quality assurance. Resists mechanical pullout for a more secure connection.

GASPRO 1/4 Inch RV Propane Quick Connect Fittings, Natural/LP Gas Propane Quick Disconnect Kit with Shutoff Valve, Full Flow Plug 100% Solid Brass #ad - All brass construction. Coupling for connecting two pipes with the same diameter in a straight run. Resists mechanical pullout for a more secure connection. Kit includes a 1/4" female npt x female quick Connect shutoff valve, a 1/4" Male NPT x Male Quick Connect full flow plug. For use with low-pressure propane/natural gas systems.

Used for fuel, oil, air, liquid petroleum LP and natural gas lines connections.

More information about GASPRO GASPRO_QP1-2 #ad


Similar products



Shutoff Valve & Full Flow Plug, Solid Brass - Stanbroil Propane Natural Gas 1/4" Quick Connect Kit

#ad
#ad
Stanbroil #ad - Operating temperature range of -65 to +250 degrees F. Operating temperatures range from -53 to 121 degrees C -65 to 250 degrees F. 1/4" female pipe thread. Easy to install, no tools required. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. And its territories. 1"-20 male.

Not for use in potable drinking water applications. Hose measures 4 Feet long. 130, it will shutoff the gas flow automatically. Add a convenient connect/disconnect method. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Meets specifications astm b584 and ASME/ANSI B16 for quality assurance.

Shutoff Valve & Full Flow Plug, Solid Brass - Stanbroil Propane Natural Gas 1/4" Quick Connect Kit #ad - Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Add a convenient connect/disconnect method. Coupling for connecting two pipes with the same diameter in a straight run. Shutoff valve: 1/4" female NPT x Female Quick Connect. Type 1qcc 1 tank end connector & 5/8"-18 UNF outlet connection3/8 inch female flare fitting has an outside diameter of 5/8 inch.

Please do not apply this regulator to an appliance which supposed to equipped with a LOW PRESSURE regulator.

More information about Stanbroil #ad


Similar products



Regulator Adj 60Psi High Pre Megr-6120-60 Marshall Excelsior Company

#ad
#ad
MARSHALL EXCELSIOR COMPANY MEGR-6120-60 #ad - And its territories. 1"-20 male. Full flow plug: 1/4" male NPT x Male Quick Connect. Add a convenient connect/disconnect method. All brass construction. Flared tube connection on one side and a female NPT connection on the other. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

S. A. For use with low-pressure propane/natural gas systems. 1/4" female pipe thread. Shutoff valve: 1/4" female NPT x Female Quick Connect. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Used for fuel, air, oil, liquid petroleum LP and natural gas lines connections.

Regulator Adj 60Psi High Pre Megr-6120-60 Marshall Excelsior Company #ad - 3/8-inch female flare by 1/4-Inch male pipe thread. Female flare by male pipe thread adater. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Regulator adj 60psi high pre coupling fitting for connecting two tubes with the same diameter. Type 1qcc 1 tank end connector & 5/8"-18 UNF outlet connection3/8 inch female flare fitting has an outside diameter of 5/8 inch.

Please do not apply this regulator to an appliance which supposed to equipped with a LOW PRESSURE regulator.

More information about MARSHALL EXCELSIOR COMPANY MEGR-6120-60 #ad


Similar products



Hot Max 24209 Brass Replacement Needle Valve

#ad
#ad
Hot Max 24209 #ad - Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Not for use in potable drinking water applications. Meets specifications astm b584 and ASME/ANSI B16 for quality assurance. Marshall Excelsior. When your propane gas left in your tank too low, or the capacity flow of your appliance exceeds this regulator's Max.

Hot Max 24209 Brass Replacement Needle Valve #ad - Brass adapter. Easy to install and easy to use for precise flow control. Used for low-pressure propane systems with safety shut off valve. Female flare by male pipe thread adater. If you over tighten the nut, the stem will not want to turn in either direction. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

S. A. The regulator can still work when those problems improved, 000 BTU/hr rating at 30 PSIG pressure. And its territories. Shutoff valve: 1/4" female NPT x Female Quick Connector. Full flow plug: 1/4" male NPT x Male Quick Connector. And its territories.

More information about Hot Max 24209 #ad


Similar products